This requirements method must be approached with caution as it typically leads to an organizational structure that places team members into functional "silos" based on the type of work that they do.
由于这种需求方法导致一种将团队成员置于他们所进行的工作种类的功能性“筒仓”中的企业结构，因此必须小心的进行处理。
Using conservative percentages for productivity improvement based on the use-case method of capturing functional requirements, we estimate a 14% increase in productivity.
使用基于用例来俘获功能需求改进生产力百分比的保守估计，我们估计能够得到14%的生产力改进。
The method is based on a lightweight process geared to streamline service discovery and functional design activities during Initiation and Elaboration phases of SOA system implementation (Figure 14).
方法基于一个轻量级的过程，该过程致力于SOA系统实施的初始化与精化阶段流线型服务探索以及功能性设计活动(图14)。
This paper presents a reflection-based analysis and design method for non-functional feature which uses reflection to separate functional and non-functional feature.
文章提出了一种基于反射的非功能特性分析设计方法，该方法利用反射思想分离功能特性和非功能特性。
As the nonlinearity, time-varying parameters and large lag make the control difficult, a predictive functional control method based on T-S (Takagi-Sugeno) fuzzy model is presented.
针对其存在非线性、参数时变和大延迟等难以控制的特性，提出基于T - S模糊模型的预测函数控制新方法。
The paper proposes concept of group analysis and associated functional model based on hierarchies of military decision process, and a STA method based on the group analysis is proposed further.
针对该问题，着眼于军事决策过程的层次性，提出了群体分析的概念及相应的功能模型，并进一步提出了基于群体分析的STA方法。
Using modularity design method, a process of designing a kind of centrifugal pump is discussed. Based on functional analysis, a scheme of optimum principle is determined.
应用模块化方法设计一种离心气泵，并在功能分析的基础上确定最佳方案。
Based on the distribution of functional zones, PM10 environment capacity of Jincheng Industrial Park, Shanxi Province, was measured by using A-P value method.
在功能区划分的基础上，应用A-P值法对山西省晋城市工业园区的PM10容量进行核算。
Based on a preliminary study on the identified multiplier method, it is pointed out in this paper that this method is a unite method of functional transformation in variational principle.
本文通过对已识别拉氏乘子法的初步探讨，指出了已识别拉氏乘子法是变分原理中泛函变换的统一方法。
A method for discovering functional dependencies based on the stripped partition database This efficient method is based on the concept of agree sets.
基于带状划分数据库的发现函数依赖集的方法这种方法基于一致集的概念。
Given attribute set and minimum cover set of functional dependencies over one relational schema, a new method for designing normalized XML schemas based on schema graph is proposed.
在给定关系模式的属性集及其函数依赖最小覆盖集的基础上，提出一种基于模式图的规范化XML模式设计方法。
METHODS: Rational medicine flow-sheet was made based on the outfitting and functional authority of each drug storeroom and dispensary as well as the concrete prescription-filling method.
方法：根据各药库、药房设置和职能以及各药房取药的具体方法，确定合理的药品流程。
This model based on power injection method, is intuitive, convenient and versatile, and can be used for various functional modes of FACTS devices and all FACTS devices.
该模型基于功率注入法，考虑了所在线路的对地电纳，且直观、简单、通用，适用于FACTS元件的多种运行方式和所有的FACTS设备。
In this method, the object oriented model of the equipment is built based on the function and dynamical model. This model describes the structural and functional character of equipment completely.
这种方法在现有的设备定义方法的基础上，通过建立设备的功能模型、动态模型，建立起面向对象的设备模型，全面描述设备的结构特性及其功能特性。
A strategy of structuring distributed IPMCS based on functional block model and combining with software engineering method is stated and analyzed.
提出了一种基于功能块模型、结合软件工程方法构建分布式IPMCS的策略并作了分析。
The main purpose of this dissertation is to introduce the SVA-Based functional verification method in the application of actual project.
本文主要研究基于SVA的功能验证方法在实际项目中的应用。
Based on the thermal balance equation of heater element, the matrix for the cyclic functional method is established and the rules to fill this matrix are represented detailedly in this paper.
基于循环函数法的主导思想，通过对“加热单元”列能量平衡方程，构建了循环函数法的矩阵表达式，并对矩阵填写规则进行了详细阐述。
This paper discusses a new method for digital system functional testing based on paths.
本文介绍基于路径的数字系统功能测试方法。
This thesis explores how a translation theory or method based on syntactic iconicity directs and optimizes the translation in order to produce functional equivalence in translation.
本文试从句法象似性的角度出发，探讨基于象似性的翻译理论与翻译手段在翻译中实现功能对等的指导和优化作用。
Based on density functional theory (DFT) and B3LYP method, we made a theoretical study of the reaction system involving organic transitional metal compound. We studied the mechanism of each reaction.
本文采用密度泛函理论B3LYP方法对有机过渡金属化合物参与的化学反应体系进行了理论研究。
A global smoothing method based on polynomial splines is used to estimate the coefficient functions in functional-coefficient linear autoregressive models.
基于多项式样条全局光滑方法，建立函数系数线性自回归模型中系数函数的样条估计。
Based on Gurtin type variational principle a finite element method for initial value problems is presented by functional analysis. It is used for problems of beams dynamics.
从卷积型变分原理的泛函出发，通过分析泛函中的各项，推导出求解动力响应问题的时-空有限元法，并将其应用于梁的动力问题中。
A dynamic compensating method for transducers is presented based on functional link artificial neural networks (FLANN) inverse system constructed by least squares-support vector machine (LS-SVM).
提出一种用最小二乘支持向量机(LS - SVM)构造函数链接型神经网络(FLANN)逆系统的传感器动态补偿新方法。
The structural stabilities and electronic structures of W atomic chains are studied by employing first-principles plane wave pseudopotential method based on the density functional theory.
使用基于密度泛函理论的第一原理平面波赝势法，研究了W原子链的结构稳定性和电子结构性质。
The paper introduces a kind of in-system programable controller for circular machine based on P89C668HFA, shows the hardware functional block diagram of it and the implement method of ISP.
介绍了一种基于P 89c 668hfa单片机的可在线编程的圆机控制器，给出了该控制器的硬件原理框图和ISP的具体实现方法。
Then, based on the modular and top-down design method, the user interface is designed and some key functional modules are designed and implemented.
然后基于层次化模块化的软件设计思想，制定了用户接口模块的总体实现方案，设计并实现了一些关键功能模块。
A new method of particle state prediction that based on motion-functional modeling can maintain robustness and accuracy is introduced in this article.
针对这一问题，本文中提出一种通过运动函数化建模并利用模型进行粒子状态预测，以保证跟踪准确性与鲁棒性的方法。
Based on density functional perturbation theory (DFPT) and combined with the norm-conserving pseudopotential method, the lattice dynamic simulation is presented.
基于密度泛函微扰理论(DFPT)结合模守恒赝势方法进行晶格动力学模拟。
Based on the model of mechanics, some functional formulae of strata and surface movement above longwall mining goaf are derived by using the displacement method of theory of elasticity.
本文在力学模型的基础上，利用弹性理论的位移函数法导出了长壁采煤法采空区上方岩层及地表移动的函数表达式，同时给出了岩层及地表最大移动值的计算公式。
Based on the model of mechanics, some functional formulae of strata and surface movement above longwall mining goaf are derived by using the displacement method of theory of elasticity.
本文在力学模型的基础上，利用弹性理论的位移函数法导出了长壁采煤法采空区上方岩层及地表移动的函数表达式，同时给出了岩层及地表最大移动值的计算公式。
应用推荐