Together with the practical application of the panel turnover gas-lock valve, the factors of the inherent character with the friction effect are also given in this paper.
结合生产实践分析了由于摩擦阻力而形成的翻板式锁气阀所固有的特性及其影响因素。
The stiction and friction influencing the yield and reliability of MEMS are reviewed in this paper.
文章评述了影响微电子机械系统（MEMS）成品率和可靠性的粘合力和摩擦力问题。
The friction coefficient and wear resistance of compacted graphite cast iron brake shoes with phosphorous are systematically investigated in this paper.
本文对含磷蠕墨铸铁闸瓦的摩擦系数与耐磨性进行了系统的研究。
Aiming at these problems, this paper studies how the original error affects the accuracy, works out its allowable values, and finds out the equation between friction of pins and clamping force.
针对这一问题，本文研究了零件加工误差对动模板合模位置的影响，得出了零件加工误差的许用值范围，并计算了由于销轴摩擦力对合模力放大比的影响关系式。
The relationship between static and dynamic friction coefficients of the rigid blocks with smooth surfaces has been studied preliminarily by means of a dynamic test of rigid blocks in this paper.
本文通过刚块动力模型试验，对具有光滑表面刚性块体的动、静摩擦系数关系进行了初步探讨，并以模型试验结果验证了离散元数值模型的正确性。
Friction models and static characteristics of electrohydraulic servo motors are given in this paper.
给出了摩擦力模型和电液伺服马达的静态特性。
The friction factor between two tooth surfaces of instrument gears during one meshing process is imitatively measured in this paper under the condition of ultra-low-speed.
本文在极低速情况下，模拟测定了仪表齿轮在一齿啮合过程中两齿轮齿面间摩擦系数的变化情况。
In this paper, the fuzzy reliable optimum design's mathematical model of the spur gear under the action of the sliding friction is set up by using the fuzzy and reliable theory.
通过应用模糊设计理论和可靠性设计理论，建立了摩擦力作用下直齿圆柱齿轮传动的模糊可靠性优化设计的数学模型，并对其进行优化处理。
Friction coefficient of different tobacco package paper was measured, and the data was analyzed and compared with these different parameters.
通过对不同的烟标纸进行摩擦系数的测试，比较并分析了不同因素对烟标纸摩擦系数的影响。
This paper studies the tracking control problem of mobile manipulators in which parameter uncertainty, system friction and disturbance are considered.
讨论了受摩擦力、外界扰动及参数不确定的移动机械手控制问题。
In this paper, friction field distribution between sliver and pressure bar on a homebred drawing frame is analyzed, and on this basis, the best range of contact arc is deduced.
本文以国产并条机为例，分析了并条机上须条与压力棒上摩擦力界的分布，并进一步推导出了须条对压力棒包围角度的最佳范围。
This paper grasps its kinematic traits and gives a specific and intuitionistic solution through analysing each contribution of main motivity and static friction.
本文抓住刚体无滑滚动的运动学特征，通过分析主动力和静摩擦力各自的贡献，提出一种形象、直观的求解方法。
M-B fractal contact model is used to predict the static friction coefficients in this paper.
根据M - B分形接触模型时静摩擦系数进行预测。
This paper mainly discusses the methods of judging the direction of friction force, and the effect and cause of friction force is studied systematically.
本文重点阐述了判定摩擦力方向的方法，对摩擦力的作用及摩擦力的成因进行了比较深入的探讨。
This paper analyzes the influence of sliding friction on contact deformation in theory and demonstrates it by means of test.
从理论上分析了滑动摩擦对接触变形的影响，给出了压陷量的修正公式，并通过试验加以验证。
On the edge of the paper to reduce friction, that is, reduce mechanical wear and tear, and the durability of the tool itself.
刀与纸边的磨擦力减少，即减少对机械的磨损，而刀本身的耐用性更强。
In this paper, we give an analysis for friction-free interference fit bolt using the finite element method.
本文采用有限元素方法在螺纹面无摩擦力的条件下对过盈配合的螺栓、螺母进行了分析计算。
In this paper, the effect of friction force on metal forming parameters has been summarized based on some last research reports.
论文基于近期已发表的文献，综述了摩擦阻力对金属成形参数的影响。
The difference between inner friction angel of sandy soil and natural slope angel of sandy soil is also put forward in this paper.
本文论述砂土内摩擦角的测定方法，及砂土内摩擦角与砂土天然坡角的区别。
This paper presents how to use a variable gain PID control method to compensate the friction in load simulator.
介绍了利用变增益PID控制方法补偿负载模拟器中摩擦力的方法。
This paper describes some points of view for computing the friction of plastic tubes.
本文阐述了若干种计算塑料管水力阻力的方法。
This paper presents a method of calculating the static sliding friction factor between zigzag slot and pin. A brief description of the fuse zigzag slot mechanism is given.
该文给出了求解惯性筒上的曲折槽与销之间的滑动静摩擦系数的一种方法，介绍了引信曲折槽机构。
This paper introduces systematically the method for measuring the instantaneous friction force of cylinder liner-piston pair in the engine.
系统地阐述了发动机缸套活塞组瞬态摩擦力的测量方法。
In this paper, the cardnol modified phenolic resins and its use in semi- metal friction materials were studied.
本文研究了槚如酚改性酚醛树脂的合成及其在半金属摩阻材料上的应用。
According to the friction and wear experimental results of dry slide of carbon steel, this paper analyses the relationships between the wearing amount, types of carbon steel and load.
根据对碳素钢进行的干燥滑动摩擦磨损试验结果，对碳素钢的磨损量、磨损形态与载荷的关系加以分析。
This paper analyzes the effect of negative friction on pile's axial force and its calculation.
分析研究负摩擦力对桩轴力的影响及基桩负摩擦力的计算。
Under practical conditions, proof of our design and manufacture friction plate's suitability as an all tested for performance in the paper.
着重阐述在实际工况，根据对比试验，证实我们设计研制摩擦片的适应性。
In addition, this paper presents how the diameter reducing rate, the die semicone angle, the friction coefficient and the original wall thickness influence the buckling and the axial elongation rate.
并分析了缩径率、缩径凹模半锥角、摩擦系数、缩径管坯初始壁厚对管端翘曲和轴向伸长率的影响规律。
The paper showed the composition, Make-technological and friction mechanism of the friction coat.
本文研究了这种耐磨涂层的组成、喷焊工艺及其耐磨机理。
Applying quantum chemistry conclusion, this paper raises "hydrogen atom piles" model and "instaneous bond" concepts, the friction phenomenons is explained.
从物质的电结构出发，运用量子力学结论提出“氢原子堆刚性模型”和“瞬时键”的概念。
应用推荐