The formulation and process conditions of pre-treatment activating solution were presented.
给出了前处理活化液的配方和工艺条件。
According to the enterprise formulation and process, this in the proportion of mixing with other raw materials.
根据各企业配方及工艺不同，将本品按下列比例与其他原辅料混合均匀即可。
The formulation and process of epoxy primer and polyester polyurethane top finish in this system were introduced.
介绍了该涂料体系的环氧底漆和聚酯聚氨酯面漆的配方和生产工艺。
In this paper, the formulation and process of Lactobacillus fermented beverage from soybean and sesame were studied.
对大豆芝麻乳酸菌发酵饮料的配方和生产工艺进行了实验研究。
The formulation and process of PE covering materials for cable are studied, their properties and applications are also summarized.
研究了PE电缆护套料的配方及工艺，总结了其性能及应用。
Moreover, this formulation and process make the cost lower. The process is not only simple, clean and no pollution, but also bette...
同时，此配方和工艺成本较低、工艺简单易行且清洁无污染，可作为羊毛低温染色的较佳工艺。
In this article was discussed the formulation and process of synthesis of rosin-modified unsaturated polyester of non-phthalic anhydride.
本文讨论了无苯酐合成松香改性不饱和聚酯树脂的配方和工艺。
The effects of adhesive formulation and process conditions upon the performance of modified corn starch adhesive were explored in this study.
本论文主要研究了改性玉米淀粉胶粘剂的主要成分配比及工艺条件对产品性能的影响。
By analysing the processing conditions and influences of amounts of each masterbatch on film properties, the formulation and process are determined.
通过考察加工条件及各功能母料的用量对薄膜性能的影响，确定了原料配方及薄膜制备工艺。
Factors affecting stability and deposition rate of electroless Cu are investigated and proper formulation and process for electroless Cu bath determined.
研究了影响化学镀铜镀速和镀液稳定性的诸因素，并根据实验确定了适宜的化学镀铜液配方及其工艺。
Objective To prepare compound aceclofenac pellets by extrusion-spheronization and study the influence of formulation and process parameters on the properties of the pellets.
目的应用挤出滚圆法制备复方醋氯芬酸速释微丸，研究制备的处方和工艺。
Moreover, this formulation and process make the cost lower. The process is not only simple, clean and no pollution, but also better as low temperature dyeing process for wool.
同时，此配方和工艺成本较低、工艺简单易行且清洁无污染，可作为羊毛低温染色的较佳工艺。
Introduce the different factors and principle in the formulation and process of water in oil emulsion system. The water in oil emulsifiers produced in Uniqema are also introduced.
论述了影响油包水乳化体系稳定性的因素、油包水的配方设计原则以及油包水的生产工艺的控制和调整，并介绍了有利凯玛公司的油包水乳化剂。
The article describes material selection, manufacture technique, formulation and process flow of high performance inorganic composite fire-prof doors with ancient sculpture decoration.
本文主要介绍了高性能无机复合材料古雕防火装饰门的原材料选择，模板的制作技术，工艺配比和生产工艺流程。
Jagmohan Gupta was much impressed by the efficient process of project planning, formulation and implementation on Chinese railways.
古普塔则对中国铁路项目规划、制定和实施全过程的高效率印象深刻。
The formulation, the technological conditions and the product properties of polyurethane materials for low density long fiber injection (LFI) process were studied.
对低密度长玻璃纤维注射工艺(LFI)用聚氨酯材料的配方、工艺条件和制品性能进行了研究。
The formulation design, processing characteristic and material choice of winding without filling in epoxy resin cast dry-type transformer are introduced. The warnings in cast process are presented.
介绍了环氧树脂浇注干式变压器无填料绕组浇注的工艺特点、材料的选择和配方设计，提出了浇注过程中应注意的事项。
But in this process, the study of dress esthetics has gone to formulation and conception in large extent, meanwhile become simplification and superficiality of dress esthetics.
但是，在这个过程中，服饰美学研究在很大程度上走向了程序化和概念化，同时形成了服饰美学的简单化和表面化。
The performance of the resin latex film was not only dependent on its formulation and the molecular chain structure of the polymer inside, but also the film formation process of the polymer.
树脂乳胶膜的性能不仅与涂料的配方和其中聚合物的分子链结构有关，而且与聚合物的成膜过程密切相关。
Formulation, technological process, product performance and operation of the rolled sheet were presented with emphasis.
重点介绍了这种卷材的配方设计、工艺流程、产品性能和施工方法。
Formulation, process, performances and mechanism of the thin solar-reflection thermal insulating paint are introduced.
介绍了薄型太阳热反射隔热涂料的配方、工艺、性能和隔热机理。
The selection of resins, formulation design, manufacture process, performance index and et al are briefly introduced.
简述了该涂料的树脂选择、配方设计、生产工艺和产品性能指标等。
The formulation design, production process and product property of outer-framework oil seals of FKM were introduced.
介绍了氟橡胶外露骨架油封的新式结构、配方设计、生产工艺及产品性能。
Their catalytic activities to the curing reaction of NEPE and HTPB solid propellants were studied by thermal analysis methods, formulation process research and performance test of propellants.
通过热分析方法、推进剂配方工艺研究与性能测试，探讨了它们对NEPE和丁羟固体推进剂固化反应的催化作用。
The formulation, preparing process, application principle and notices of anti - veining coatings are introduced.
介绍了防脉纹涂料的配方、制备工艺、使用原理及注意事项。
The selection of ingredients, formulation, production process and technical specification were described.
介绍了该涂料的组分选择、配方、生产工艺和性能指标。
In order to provide handling strength during the manufacturing process, small quantities of organic and inorganic binders are typically added to the board formulation.
为了在制造过程中增强其使用强度，通常在板材成分中加入少量有机与无机粘合剂。
The formulation, preparation process and dissolution rate in vitro of Sustained-Release Aspirin tablets(S-RAT)were studied.
本文研究了阿司匹林缓释片（S-RAT）的处方组成、制备工艺、体外溶出速率试验。
The formulation, preparation process and dissolution rate in vitro of Sustained-Release Aspirin tablets(S-RAT)were studied.
本文研究了阿司匹林缓释片（S-RAT）的处方组成、制备工艺、体外溶出速率试验。
应用推荐