There are many special requirements for forming mold of soft magnetic ferrite I-type core in the course of the pressing.
软磁铁氧体工型磁芯的压制成型对模具有许多特殊要求。
Research on the injection molding non-ret urn valve was undertaken to improve the forming mold accuracy with minimal cost.
对注射成型止逆环的研究承担了用最小的成本来提高成型精确度的任务。
Abstract:Designs this automatic machine of resistance forming mold is in order to make the pins of the resistances forming shape finally .
摘要：设计本电阻自动成形机器模具主要是针对电阻引脚的最终成形生产。
The cost of the forming mold of the invention is low, the compound process is simple, and the combination of the compound surface is firm and reliable.
本发明成型模成本低、复合工艺简单、复合面结合牢固、可靠。
The article introduces the powder metallurgy mold design and size count of forming spares, besides, it analyse working process of miniature cylinder forming mold.
文章重点介绍了微型气缸的粉末冶金成形模的设计以及成形零件相关尺寸的计算方法，同时对微型气缸成形模的工作过程进行了分析。
This paper analyzes the key manufacturing technologies of composite material vacuum forming mold which is a large-scale and complex for a certain type of aircraft nose.
本文在分析某型飞机机头一套大型复杂复合材料真空成形模具的基础上，经多次工艺试验，成功提出了适应实际生产需要的解决方案。
The optical lens forming mold results in simplified optical lens making process, lowered forming material cost, reduced manufacture time and lowered production cost of optical lens.
藉该光学镜片成型模具可简化制程、降低成型材料的成本以及减少制造时间，进而可节省光学镜片的生产成本。
By adopting the molding method and the film hot press forming mold, wrinkling in the corner of the film insert can be effectively avoided, thus enhancing the quality of the film insert.
采用本发明中的成型方法及薄膜热压成型模具，可有效防止薄膜镶件在边角位置起皱，提高薄膜镶件的质量。
The utility model relates to an industrial forming mold for motor coil down lead lug, which belongs to the motor production, in particular to an universal elbow mold for motor coil down lead lug.
本实用新型涉及电机制造、特别是电机线圈引线头成型的工装模具，具体为一种电机线圈引线头通用弯头模。
The liquid-position sensor working principle of brake-used oil tank, structural design of floater products, mold design, foam material as well as foam forming process are introduced.
介绍了刹车油箱液位传感器工作原理、浮子产品结构设计、模具设计、发泡材料用料、发泡成型工艺等方面内容。
Therefore, the research of the fast manufacture technology method that develops the steel - based ramming mold is an important topic in the Material Forming and Process Engineering field.
因此，研究开发钢基冲压模具的快速制作技术方法是材料成型与加工领域的一个重要课题。
Corn cake Fried until after forming carefully remove mold, the corn tortilla Fried until both sides are golden.
等玉米饼煎至成形后小心地取下模具，最后将玉米饼煎至两面金黄熟透即可。
This article introduces a new manufacture process of the sintered mould for matrix PDC bits by using laser rapid modeling technique, rubber mold forming technique and kaolin powder modeling technique.
探讨了一项利用激光快速成型技术、胶模成型技术、陶土粉成型技术制造PD C钻头烧结模具的新工艺。
The clamp apparatus and cutter designed to repair the forming face of the bellow mold can surmount such difficulties as the chip removal, the cutting feed and the axial anastomosis.
所设计的夹具、刀具用于修复波纹管模具成型面，可克服排屑、进刀及成对模块轴向稳合等诸多困难。
The problems and the treatments related to the mold manufacturing, technological conditions and plastics materials, which are often encountered in mold forming, are collected and arranged.
对模具在工作中常遇到的与模具制造、工艺条件及塑料材料有关的问题及相应对策进行了归纳整理，组成了模具诊断与维修知识库。
There are many disadvantages for adopting the press forming techniques of mold to manufacture the inner hull of wave shape, so we are difficult to ensure its manufacturing quality.
采用模型压制成形工艺制造波形炉胆存在诸多缺点，难以保证其制造质量。
Secondly help mold flow analysis techniques to optimize the process parameters of mold forming, casting systems and cooling systems.
基于模流分析技术优化了模具的成型工艺参数、浇注系统及冷却系统。
The forming unit has locking system and mold combining structure, and the locking system is a wedged locking mechanism.
成型设 备具有锁紧系统和模具合二为一的结构，锁紧系统为楔形锁紧机构；
Laser forming technology is a newer research technique, it can produce metalwork without any mechanical contact and mold.
激光成形技术是一种相对较新的技术，它没有任何机械接触就可以生产出金属制品，而不需要任何模具。
The forming technology was analyzed, including drying of PET resin and the temperature control of mold work section. The construction of a hot runner mold and its mechanism were described.
分析了PET瓶坯的成型工艺，包括PET树脂的干燥、模具工作部分的温度控制等，阐述了热流道注塑模的结构及工作原理。
Cause of crack was pointed out through analysis of crack during forming of linker against counter thrusting electricity. Moreover mold structure was optimized on the basis of analyzing the result.
通过对防反插电联接器成型时断裂情况的分析，指出了引起产品断裂的原因，并根据分析结果对模具结构进行了优化设计。
The method for forming a solder mold for transferring solder to a wafer includes etching a plurality of solder cavities into a substrate.
一种用于形成用于将焊料转移到晶片的焊料模的方法包括将多个焊料腔蚀刻到基板中。
Selective laser sintering (SLS) is a new forming technology, which can fabricate any complicated physical parts directly from thermoplastic powder without mold.
选域激光烧结(SLS)是一种新型的成型技术，可以直接将热塑性塑料粉末制成任何复杂形状的实物，而不需要模具。
The present invention provides on-line cold bent steel secondary punch mold and punching method, and belongs to the field of plastic forming technology for metal.
本发明提供了一种在线冷弯型钢二次冲切模及其冲切方法，属于金属塑性成型技术领域。
The forming character of screw cap is analyzed, and screw cap injection mold is designed.
分析了螺纹盖的成型特点，设计了螺纹盖注射模具。
This full-automatic forming equipment for thermoforming plastic sheet includes feeding, heating, forming, cooling, mold unloading, cutting at one blow.
本产品是以送片、加热、成型、冷却、脱模、切断一次性完成的全自动、高效塑料片材成型设备。
The present invention relates to a solder mold with ventilation channels, a method for forming the solder mold, and a method for using the solder mold.
本发明涉及具有排气通道的焊料模及其形成和使用方法。
An actuator is coupled to the top mold portion for moving the top mold portion between the molding material loading position and the article forming position.
顶部模具部分，其由所述顶部平台所承载且能够在成形材料装载位置以及对象形成位置之间移动；
The present invention provides on-line cold bent steel cutting mold and cutting method, and belongs to the field of plastic forming technology for metal.
本发明提供了一种在线冷弯型钢切断模及其切断方法，属于金属塑性成型技术领域。
The characteristic and application of the foam, and the requirement of the forming technology is described in the paper. In the same time, the foaming mold is introduced.
阐述了发泡材料的特点及应用，以及成形工艺要求；同时，对发泡材料成形模具进行了介绍。
应用推荐