A compact output switch for a water pulse forming line (PFL) e-beam accelerator was designed.
介绍了一种水介质脉冲形成线强流电子束加速器的输出开关的设计和实验结果。
Auto forming line die is one of the most difficult kind dies for design, because of too much constraint of press equipments.
自动冲压线模具受设备的约束条件多，是设计难度最大的一类模具。
It can reduce the length of the pulse forming line on the premise of forming the same output pulse width to adopt a helical structure.
采用螺旋形结构的脉冲形成线能在形成同样脉冲宽度的前提下大大缩短形成线的长度。
This transformer can be used to realize the output impedance transformation of the ceramic pulse forming line with low characteristic impedance.
此变压器可用于低阻抗陶瓷脉冲形成线输出端的阻抗变换。
The configuration and simulation model of water pulse forming line switch with prepulse suppression ground plane (PPS) were introduced in this paper.
介绍了具有预脉冲屏蔽板的水介质脉冲形成开关的结构和等效电路模型，给出模型中等效参数的计算方法。
This paper is aimed at searching for a new method in customized cut-off cold formed profiles steel on roll-forming line. The slant shear theory is put forward and a new machine is designed.
针对辊压线生产型钢定长锯切的缺点，进行了研究和探索，提出采用在线剪切方式，分析了剪切原理，得出了剪切力和剪切行程。
The rough waters in the trough scatter light in all directions, forming a dark line.
谷底汹涌的水体将光散射到各个方向，形成了一条暗线。
Today the line begins forming hours before the pantry opens, according to Senior Pastor Oscar Ovalles, as more than 200 families come from city neighborhoods and affluent suburbs alike.
如今在发放前的几个小时人们就开始排队了，据高级牧师奥斯卡·奥维拉斯说，有超过200个从城市社区和富人郊区来的家庭。
The second chain of islands runs from the Bonins along the Marianas, Guam and Palau, forming a north-south line east of Japan and the Philippines.
第二岛链自小笠原群岛算起，沿马里亚纳群岛和关岛一路延伸到帕劳群岛，在日本和菲律宾以东构成一条南北走向的岛链。
So when I reach the dew line, I start forming liquid.
这条我们称作露线，当我到达露线时。
Complete Line of ECONOSEAL cartoning, tray forming, and case packaging equipment.
ECONOSEAL全套制纸板盒、托盘成型和纸箱包装设备。
The line heating, a very special technology in steel plate forming process, has a broad application in the shipyard to create cured surface of ship structure.
水火弯板是钢板无模成型工艺中一项极具特色的技术，目前广泛应用于造船生产中。
Indirect method can adjust the characteristic line equation in time based on the status of practical process, thus the forming precision can be improved.
间接法能够根据板料实际加工状态及时调整特征方程，提高了成形精度。
Shape forming in artistic design actually depends on an ingenious application of point, line and surface.
设计作品中形的构成，其实就是点、线、面的巧妙运用。
Lahuang . Kahuang and non-standard product line forming.
拉簧。 卡簧和无规格线成型产品。
The production line is composed of de-coiler, punching, roll forming (welding), cutting system, electric control system, etc.
整条生产线由放料系统、冲孔系统、成型系统(焊接技术)、切断系统、电控系统等部分组成。
Even till the last line of the novel, the author doesn't give the readers a final verdict, leaving them confused and reflecting, thus forming the dialogue with these characters.
作者即使到小说的最后一行也没有给读者一个最终的定论，使他们迷惑并思索着，从而形成与叙述者之间的对话。
The forming and maintaining of K-H instability was an important reason of causing vortex on the shear line maintain, strengthen, and causing rainstorm.
不稳定的形成和维持，是导致中尺度切变线上小尺度涡旋维持、加强，并产生强风暴雨的重要原因。
This paper researches on 4100QB Cylinder-block of the KW moulding line, particularly introduces the forming mechanism of blowholes on 4100QB Cylinder-block.
本论文以在KW造型线上生产的4100QB机体作为研究对象，详细介绍了4100QB机体产生的侵入性气孔的形成机理。
The performance characterization of SSP by SEM, and estimation of physical and chemical forming process of SSP by temperature field of line focused area are analyzed.
并通过对线聚焦加热区的温度场测量分析推断颗粒硅带的物理化学形成过程。
This paper USES cutting tool with the contact line of conjugate tooth profile based on the principle of the gear engage and generating shape line forming conjugate engage.
本文依据齿轮啮合原理，利用产形线形成共轭啮合的原理，采用共轭齿面接触线为刀刃构形的切齿刀具，这样构形的切齿刀具都非常简单，并且容易采用合理的几何角度。
The basic theoretical methods such as Slab method, UBET, Slip Line method, FEM, and FVM have been used in the research of metal plastic forming technology.
研究金属塑性成形规律的理论方法现在有主应力法、上限法、滑移线法、有限元法和有限体积法。
Basal experimental data and theory analysis are foundations for further research on Multi-Core -line-die Powder Extrusion Forming.
实验研究所获得的基础数据和理论分析，为“多芯线粉末挤压”的进一步研究奠定了基础。
The plastic forming is classified to the integral forming and the local forming, and the local is again classified to the point, the line, and the face forming.
将塑性成形方式划分为整体成形与局部成形两大类，又将局部成形划分为点成形、线成形与面成形三种类型。
The production line is composed of de-coiler, punching, forming, cutting system, electric control system, etc.
整条生产线由放料系统、冲孔系统、成型系统、切断系统、电控系统等部分组成。
The production line is composed of de-coiler, leveler, punching/cutting, roll forming , electric control system , etc.
整条生产线由放料系统、校平系统、冲孔/切断系统、成型系统、电控系统等部分组成。
The production line is composed of de-coiler, leveler, punching, forming (welding), cutting system, electric control system, etc.
整条生产线由放料系统、冲孔系统、成型系统(焊接技术)、切断系统、电控系统等部分组成。
However, the jets do heat the gas in their line of travel, forming an expanding cocoon.
但在喷流行进的过程中，它们确实会将气体加热，产生膨胀的茧状结构。
However, the jets do heat the gas in their line of travel, forming an expanding cocoon.
但在喷流行进的过程中，它们确实会将气体加热，产生膨胀的茧状结构。
应用推荐