The defect classification and the reason forming defect of VGA thin film transistor active matrix liquid crystal displays are analysed.
分析了VGA有源矩阵液晶显示器的缺陷分类、产生原因。
The forming defect of the bend forging and the influence of blank and die shape parameters are studied. All of these provide theoretical basis for practice.
分析了弯曲成形中出现的主要缺陷，提出了毛坯形状和尺寸、模具参数对成形质量的影响规律，为实际生产提供了理论依据。
The defect classification and the reason forming defect of VGA thin film transistor active matrix liquid crystal displays are analysed. Open tester, short tester and display tester are developed.
分析了VGA有源矩阵液晶显示器的缺陷分类、产生原因。研制出了有源矩阵液晶显示器的断路测试板、短路测试板以及全板显示测试板。
Causes to the laminar defect of the umbrella bone steel occurring in the process of cold forming are analyzed by chemical analysis and microstructure analysis.
采用化学分析及微观组织分析的方法，对伞骨钢压扁后成型过程中所产生分层缺陷的原因进行分析。
Then the principal strain measurement and forming safety margin prediction in defect regions are conducted.
接着对缺陷区域进行主应变测量和安全成形裕度预测。
The market rate of interest can not directly substitute the social discount rate for its defect on preference revealing, interest forming, the reward of risk, etc.
而市场利率由于在偏好揭示、利率形成、风险报酬等方面的缺陷，又不能直接替代社会贴现率。
The amorphous forming relates with variety of the crystal size, defect and stress during ball milling.
此非晶合金的形成是晶粒细化、球磨过程中的缺陷和应力等多种作用的结果。
The forming mechanism of pinhole defect in no-solvent polyurethane coat on centrifugal nodular cast iron pipe is analyzed, some effective measures to eliminate offered.
分析了离心球铁管无溶剂聚氨酯涂层针孔缺陷形成的机理，给出了消除这一缺陷的有效措施。
The defect on the surface of pickle sheet is introduced, its forming cause and influence on the following deep working analyzed, some quality control measures proposed.
对酸洗板表面主要缺陷进行了介绍，分析了形成各种缺陷的成因及其对后续板材深加工的潜在影响，提出了质量控制措施。
The characteristics and forming reason of faint-sliver defect found in cold-rolled steel sheet were discussed.
对冷轧板中发现的条痕缺陷特征进行了分析，探讨了该缺陷的形成原因。
The results showed that the forming of crack was mostly made by the interface defect between overlaying welding layer and matrix.
结果表明，堆焊层与基体的界面缺陷是裂纹形成的主要原因。
As for flange bending hydraulic rubber forming, the main defect is wrinkling of flange.
就凸弯边高压橡皮成形而言，其主要成形缺陷是凸缘部分的失稳起皱。
Special glue is used on the surface of specimen , forming welding defect, which has little influence on microstructure and mechanical properties of joint.
待焊表面涂抹专用密封胶后，可形成结合线伸入缺陷，但对接头组织和力学性能影响不大。
As research methods limited, many problems such as metal flowing, defect forming have not been able to attain the significant breakthrough for steel tube con-rolling process.
过去由于受研究手段所限，对钢管连轧过程诸多问题，如金属流动、缺陷形成等的研究难以取得实质性突破。
The forming cause of the appearance quality defect of rubber sleave was analyzed, and the solvation measures were presented.
分析了橡胶皮套外观质量缺陷产生的原因，介绍了解决措施。
To avoid forming layer defect, rising pouring temperature are using improved coating and selecting low density styrofoam pattern are a great help.
提高金属液浇注温度及改良涂料，选用低密度泡沫塑料作模样材料对避免产生分层缺陷有帮助。
The reasons of forming the bone china defect "Pinhole" were approached in the light of experiments, and the effective ways to control defect "pinhole"were given.
结合试验探讨了骨瓷烧泡缺陷产生的原因，并指出了控制烧泡缺陷的有效途径。
The result is that multi-steps forming can improve the forming ability of sheet metal and retrain the wrinkling defect;
结果表明，多道次成形可以提高板材成形能力，抑制起皱等成形缺陷的产生；
Slip line is a kind of surface defect which occurs in the forming of automobile panel and affects surface quality of automobile panel and appearance of body.
滑移线是汽车覆盖件冲压生产中经常出现的一种表面缺陷，它严重影响了覆盖件的表面质量和车身的外观。
This paper introduces in detail the reasons for the defect forming and removing methods in terms of warp knitting process and dyeing process.
文中从编织过程和染整过程两方面详细阐述经编弹力织物疵点的成因和消除方法。
Using flexible interpolator pad is an important way to suppress the part surface defect in stretch-forming process on multi-point tool.
采用柔性垫层是抑制和消除多点模拉形过程中零件表面缺陷的重要措施。
Using flexible interpolator pad is an important way to suppress the part surface defect in stretch-forming process on multi-point tool.
采用柔性垫层是抑制和消除多点模拉形过程中零件表面缺陷的重要措施。
应用推荐