Starter Drive, Transmission Shaft, Cold Forging Parts, Lift Motor.
单向器，传动轴，冷挤压件，摇窗电机。
The study is focused on isothermal precision forming technology of rib-web forging parts.
主要研究筋板类锻件等温精密成形技术。
We can according to user drawing or sample various special flange and forging parts production.
我们可以根据用户图纸或样品进行各种特殊法兰及锻造零件的生产。
The experiment results on 2618 A A1 alloy are analyzed and the bases for determining the technical parameters of 2618A Al alloy forging parts are provided.
本文对2618A铝合金进行了大量的试验，并对试验结果进行了较详细地分析和研究，为2618A铝合金锻件研制过程中锻造工艺参数的确定提供了依据。
By comparison with experimental results, it would be proved that FE simulation is available and will provide guideline for deformation process of complex forging parts.
有限元计算结果与实验结果的比较，证明了采用刚塑性有限元法研究螺旋伞齿轮闭塞挤压工艺是可行的，将在复杂零件的塑性成形工艺的研究中起到指导作用。
Our main products include screws, bolts, nuts, rivets, clips, machining parts, casting parts, forging parts, stamping parts, bearings, hand tools, work stations and automatic machines, etc…
我们主营的产品包括螺钉、螺栓、螺母、铆钉、夹子、机加工件、铸件、锻件、冲压件、轴承、手持式安装工具和自动化装配设备等。
Taking cylinder nut-protected bolt, one of the cup-shaped parts in the forging parts of DF7C gas engine, as an example, the warm extruding is researched, accordingly, the forming die is designed.
以DF7C型内燃机车锻件中的杯形零件之一——气缸螺栓保护螺母为例，进行温挤压工艺研究，并据此设计出了成形模具。
The experiments consisted of the measurement of yield stress, tensile strength and hardness for samples cut from various parts of the forging.
试验包括对取自不同锻造零件的试块的屈服强度、抗拉强度及硬度的测量。
Largely automatic forging machines are used for the quantity production of engineering parts.
大型的自动化锻机用于工程零件的批量生产。
One of the quickest ways to the top is to turn yourself into a "node" by starting an organisation or forging a link between separate parts of a company.
爬到顶点的最快办法之一就是使自己成为一个“中心点”，途径是开创一个自己的团队或是同单位的各个孤立部门间建立联系。
Through the technology analysis and die design of the support saddle, the application of the liquid die forging technique for complicated parts was introduced.
通过支承座零件的工艺分析和模具设计，介绍了液态模锻技术在复杂零件上的应用。
Forging production of machinery, vehicles, electrical and mechanical equipment, spare parts rough and finished, and sprocket, gear, engine components, flanges and other products.
锻造生产各种机械、车辆、机电设备等零部件毛坯和成品，及链轮、齿轮、发动机零部件、法兰等产品。
The research on microstructure pattern and mechanical properties of the circular ring parts by liquid forging experiment under different specific pressures and casting temperatures were stated.
通过圆环零件的液态模锻成形实验，对在不同比压和浇铸温度条件下，锻件的微观组织形貌和力学性能进行了分析研究。
Forging produces a great many industrial components such as blanks, bars, hubs, spindles, shafts, rings and piping parts.
锻造生产了大量的工业组件，例如，选择题，酒吧，集线器，纱锭，竖井，戒指和管道部分。
Professional factory production: forging stainless steel ring, mechanical seal parts, thick-walled stainless steel tube, and other kinds of non-products and accessories.
本厂专业生产：锻件特种不锈钢材料、机械密封配件、不锈钢厚壁管子等产品及各种非标配件。
This CAPP system composes by 4 parts of basic information input module, forging knowledge and criterion saving module, decision-making and process optimizing module, process CARDS output module.
该系统由零件信息录入模块，锻造工艺知识和行业规范存储模块，锻造工艺决策优化模块，工艺数据合成及工艺卡片输出模块4个主要部分构成。
As the die adopts some unique design, it also can be used for reference when design hydraulic forging die for similar parts.
模具的某些独特设计具有代表性，可供同类零件液锻模设计时参考。
Technical test, production and application of gearshift forks show that application of investment casting-forging technology to some special-shaped parts may be popularized.
通过变速器拨叉零件的工艺试验和生产应用，说明对一些异型工件应用失蜡浇铸锻造工艺可以推广。
No clamp clamping head machine to solve a cold forging machinery clamp small, very short body, both ends of the large, mid and small shaped parts and difficult delivery of spare parts.
无夹钳开合模冷锻打头机解决了有夹钳机械生产极小、极短身、两端大、中端小等异形零配件和难于传递之零配件。
It is found that the alloy has a better mobility in forging process. Lack of filling occurred in the head and the edges. The main flaw is also easy to produce in these parts.
研究发现，锻压过程中合金的流动性整体较好，在锻件头部和杆部边缘处充填性稍差，主要的缺陷也易在这些部位产生。
The die casting-forging processing is suitable for producing automobile parts with complicated shape and high strength as well as other structure components.
铸锻双控成形工艺主要适合生产形状复杂和高强度要求的汽车零部件和其他结构件。
The calculation method and general procedure in this paper are also fit for other main parts of forging and stamping machine.
文中的计算方法和一般步聚同样适用于锻压机械中其他主要构件。
From these analysis, it is shown that for some forgings and some parts, the overlap forging is feasible and economical.
分析认为，对于部分锻件及标准件采取“套锻”的方式是可行且经济的。
Roll forgings. In roll forging, a bar stock, round or flat is placed between die rollers which reduces the cross-section and increases the length to form parts such as axles, leaf springs etc.
在滚锻时，圆的或是扁平的棒料放在模辊之间缩小横截面增加长度制成诸如轮轴、板簧之类的零件。
Instrumentation parts, bolts, nuts, forging shaft, regulation pole, non-standard, American standard, British standard, etc.
仪表件、螺栓、螺帽、锻造轴、调节杆、非标、美标、英标等。
Then the FEM simulation was applied to study the influence of friction factor and initial forging temperature on maximum forming force, which provided reference on finishing process for similar parts.
通过有限元模拟，进一步研究了整形温度、摩擦系数对最大载荷的影响规律，为此类零件的局部精整工艺制定提供了理论参考。
Then the FEM simulation was applied to study the influence of friction factor and initial forging temperature on maximum forming force, which provided reference on finishing process for similar parts.
通过有限元模拟，进一步研究了整形温度、摩擦系数对最大载荷的影响规律，为此类零件的局部精整工艺制定提供了理论参考。
应用推荐