Forging forming is by forging equipment utilization momentum, pressure will build to the desired shape of the metal.
锻造成型是靠锻造设备利用冲力、压力将金属打造至所需形状。
Because of the forming temperatures are different, the cooling of warm molding forging are distinguish from hot forging forming.
因其成形温度的特点，对温锻模具冷却有别于热锻成形。
The production process includes hammer die forging, pressure forging, roll forging forming, and precision rolling-die forging composite technology.
前轴是汽车中的大型重要锻件，其生产工艺可归纳为锤上模锻、热模锻压力机上模锻、成形辊锻、精辊-模锻复合工艺等几种类型。
During forging forming process, temperature affects the pattern of metal deformation considerably, especially in the forming process at high temperature.
锻件成形过程中，非稳态、不均匀的温度场对金属的塑性流动有很大的影响，尤其是高温成形过程。
The article has described substance and its applicability of roll forging technology, advantages producing harrowing tooth with roll forging forming technology.
叙述了辊锻工艺实质及其适用性，用辊锻成形工艺生产耙齿的优点。
Forging forming process of large pipe produced on vertical hydraulic press was discussed. Relative tools and dies were designed, and production process was drawn up.
探讨在立式水压机上生产大型管材的锻造成型过程，设计相应的工模具，制订生产工艺。
Forging forming of heavy flange and fork by different forging equipment has been analysed with die optimization and failure analysis for the purpose of higher productivity and lower die cost.
分析比较了在不同锻压设备上进行重型法兰叉类件锻造成形的特点，对其模具进行了优化设计和失效分析。
Metal with low carbon level is soft unlike metal that contains much carbon. In forging the two kinds of metal are mixed forming the most beautiful pattern.
和含碳量较高的合金不同，含碳量低的合金稍软一些，在锻造过程中，两种合金熔合在一起，就会形成极其漂亮的花纹。
Forging is an important hot-forming process. It is used in producing components of all shapes and sizes, from quite small items to large units weighing several tons.
锻造是一种重要的热成型工艺。它能用于生产各种形状和尺寸、从很小到重量数吨的零件。
Forging technology of complicated large crossing shaft has been probed into, which can be used for reference to forming of similar type of forgings.
探讨了复杂类大型十字轴锻件的锻造成形工艺，该工艺对同类型锻件的成形也有借鉴价值。
At present, quick heating or medium protected heating to reduce or prevent oxidation during heating are often used in the process of thermo-plastic forming such as forging.
目前，在锻造等热塑性成形生成过程中常采用快速加热和介质保护加热等方式来减少和防止坯料在加热过程中的氧化。
The best degree programs offer courses in metal forming, stone setting, etching, forging, patination, plating, lathe work, and die casting.
最好的学位项目设有金属成型、石头镶嵌、烛刻术、锻造术、生锈、电镀、车削加工和压模铸件课程。
Fully closed precise plastic forming processes are suitable to the forging which have complex shape, high dimension accuracy, good surface quality and using properties.
闭塞式精密塑性成形工艺适合于成形一些形状复杂、尺寸要求、表面质量和使用要求较高的零件。
This article describes the forging's forming technological method which include the equipment choosing, die designing, forging process and heat- treatment, etc.
本文论述了该锻件的成型工艺方法，包括设备选择、模具设计、锻造工艺、热处理等。
This process is high automatic and has good forming quality, and can reduce machining work after forging and save raw materials and machining costs.
该生产工艺自动化程度高、成型质量好，在很大程度上减少了锻后机加工的工作量，节约了大量的金属原材料及机加工成本。
This paper introduces the characteristics of mould and forming methods of forming bicycle handlebar by liquid forging hydraulic pres.
介绍了在液态模锻液压机上成形自行车把接头的模具特点和成形方法。
The deformation and flow of metal in the process of roll forging are much different from those of ordinary die forging, So are the design of its technology, preliminary forming dies and dressing dies.
辊锻过程中金属变形及流动，与一般模锻工艺相比存在较大的差异，因而其工艺设计及初成形道次模具、整形模具设计也不同于常规模锻工艺。
Cold forging is a kind of precise forming technology, and has the unique advantages compared to the traditional machining technology.
冷锻技术是一种精密塑性成形工艺，广泛应用于各种机械产品关键零部件的制造。
This paper introduces the characteristics of mould and forming methods of forming bicycle handlebar by liquid forging hydraulic pres. The liquid forging can form high quality handlebar.
介绍了在液态模锻液压机上成形自行车把接头的模具特点和成形方法。液态模锻可得到优质美观的把接头。
The cold forging of the spur gear is a complicated three-dimensional forming, and its process and precision are influenced by many factors.
直齿轮的冷锻成形，属于复杂的三维变形，多种因素影响齿轮的成形和精度。
Sheet warm forming process, sheet warm hydroforming process and sheet press forging process are introduced in this paper.
介绍了镁合金薄壁板材的温热冲压成形技术、温热液压成形技术和局部热冲锻成形技术。
Web thickness is one of the important parameters in Closed-die forging process, which has an effect on forming force of die forging and material consumption.
连皮厚度是开式模锻工艺参数中的一个重要参量，它对模锻变形力和材料的消耗有很大的影响。
If we adopt the advantages of two forming methods simultaneously, we can present a new forming method that is liquid combination process of die casting and forging.
如果两者融合，扬长避短，实现双控，就可以提出一种新的成形方法，即液态铸锻双控成形。
At last, with the improved forming process and accuracy control operation in this thesis, series of experiments of precision gear forging have been implemented.
最后，采用本文的工艺手段和精度控制措施，进行了一系列齿轮精锻试验，并进行了小批量的生摘要产。
The hydraulic jack besides USES in the forging and stamping forming, may also use in rectifying, the press mounting, the pack, the briquetting and the clamp and so on.
液压千斤顶除用于锻压成形外，也可用于矫正、压装、打包、压块和压板等。
Based on the analytic results of the numerical simulation, the forming process and the mould structure for the spur-gear open-die forging were designed properly.
在数值模拟分析结果的基础上，对直齿轮的开放式成形工艺和模具结构进行了合理设计。
But excludes sheet metal working machinery and metal-forming and forging machines.
但不包括金属板加工机，金属成形机与锻压机。
The mechanical press is one of the most main forging and stamping equipments in metal plasticity forming processing.
机械压力机是金属塑性成形加工中的最主要的锻压设备之一。
The mechanical press is one of the most main forging and stamping equipments in metal plasticity forming processing.
机械压力机是金属塑性成形加工中的最主要的锻压设备之一。
应用推荐