LINK8 element is used to model the steel reinforce bar except in the wall. LINK8 can only transfer axial force and has no volume.
除剪力墙中的钢筋本文模型中其他纵筋采用LINK8单元模拟，该单元只传递轴力且没有体积。
You can also force an overwrite at any time using the >| (a greater-than symbol followed by a vertical bar) redirection operator.
您还可以在任何时候使用 >|（一个小于号加上一个竖线）重定向操作符强制进行覆盖。
The pressure safety devices can help to retain the draw bar pulling force in the event of a breakdown of the hydraulic system.
安全阀可以防止因液压系统故障等原因而引起的油缸输出推（拉）力急骤下降，可确保加工安全。
Therefore, the strength check of multi-internal force from the cross-section of bar can be resolved by means of mechanical method.
为此，利用材料力学方法可以解决杆件横截面上存在多个内力的强度计算问题。
RESULTS:Force platform could be used to test the static maximum force and the fatigue characteristics of the muscle during stand up by an additional bar frame .
结果：通过辅助杠铃架，用测力台可实施静力性蹬伸最大力量、疲劳特性的测试；
But this calculation model in fact does not specify the force condition of the elastic bar, which leads to great deviation.
这种计算模型不能真实地反映弹条安装过程中的受力情况，导致计算结果偏差很大。
Bar workers in Ireland are breathing easier since the smoking ban came in to force three years ago, according to new research.
依照最新研究，爱尔兰酒吧工人自从三年前禁烟令实施以来呼吸更自在了。
Combining with three nodes isoparametric axial force element, the new element can be used to accurately calculate the shear flow action between bar and skin in thin-wall structure.
它与三节点等参轴力杆单元组合时可以精确地模拟薄壁结构中杆与蒙皮之间的剪流作用。
In this paper, a practicable walking mechanism, revolving slide bar mechanism, which is devised by the authors, is introduced, and its force condition is analyzed.
本文介绍了作者提出的一种具有实用性的步行机构——转动滑杆机构，并对使用这种机构的步行车辆的受力情况进行了基本分析。
Shanghai Songjiang Thames Town Big Island Bar is a timber structure. The force analysis, section selection, the connector calculation, fire proof design during the structural design are introduced.
上海松江泰晤士小镇大岛茶室为重型木结构，介绍了该工程在结构设计中的受力分析、截面选择、连接件计算、防火设计等过程。
The influences of the separating force and axial force of the piercing point bar on the wall thickness of the shell pierced, and on its lateral uniformity are analyzed quantitatively.
定量分析了穿孔轧制力和顶头轴向力对毛管壁厚及其横向均匀性的影响。
The effects of the axial force of the point bar, both on the wall thickness of the pierced shell and its uniformity, are all notable under high cross angles.
在大倾角条件下，顶头轴向力对毛管壁厚及其均匀性的影响都很显著。
Using three dimensional fluxional function, the rolling force and energy parameters of oval round pass sequences for hot continuous bar rolling were analyzed.
采用三维流函数法对棒材热连轧时的椭圆-圆孔型系统进行了力能参数的解析，其结果与实测结果符合很好。
On the basis of experiment research, the internal force of high strength bolt joint area of steel beams and concrete walls within steel profiled bar was analyzed under the low period cyclic load.
在试验研究的基础上，对钢梁与钢骨混凝土墙高强螺栓连接节点在低周反复荷载作用下节点域的内力进行分析。
The test included anchoring force of prestressed anchor cable, frictional coefficients, stress of concrete and steel bar and structure deformation.
测试内容包括预应力锚索锚固力、摩阻系数、混凝土和钢筋应力以及结构变形。
The drop bar must be capable of falling through the string with sufficient speed to impart the necessary force for detonation.
撞击杆必须能够以足够的速度经管柱落下，以便给予起爆所需的力。
In this system, the steel wires and steel bars are the main parts that bear the tensile force, the stress in the district above the dragging bar is low.
在拉杆拱体系中，梁底预应力筋和非预应力筋成为主要的受拉部分，拉杆上方成为低应力区。
The article presents design equations and techniques for the complete shaking force and shaking moment balancing of eight-bar linkages due to both linear and rotary inertia, except external loads.
本文利用质量分布和附加两种惯性配重相结合的方法，完全平衡了八杆机构的摆动力和摆动力矩。
The action of the magnetic force moment and the magnetic force on the bar magnet in the magnetic field can be considered as that of wire circles through the magnetic field.
磁块在磁场中受到的磁力矩和磁力的作用也可看成通磁场对通电线圈的作用。
The longitudinal vibration equation of elastic straight bar with nonlinear material under the action of axial force is set up.
建立了非线性材料弹性直杆在轴向扰力作用下的纵振方程。
Objective: To quantitatively study the different retentive force of bar-clip attachment supporting overdenture with different number and site of retentive nylon-clip.
〔摘要〕目的：定量评价尼龙卡设置数量及部位对杆卡式附着体固位的覆盖义齿固位力的影响。
Spatial force system acting on conventional four-bar linkage type of mounting strain clamps is analysed to find the cause of damage.
本文对传统的四连杆式紧线器进行了空间力系分析，找到了致其破坏的力学因素。
At the same time, the method of applying half - range function tO the internal - force equation of straight bar is illustrated.
同时说明半幅函数在建立直杆内力方程中的应用方法。
The advice that no further adjusting tensile force of tied bar and hanger rod is needed to putted forward based on the finished structure.
针对最终的成桥结构，提出了不再进一步调整吊杆和系杆力的建议。
This dissertation can gain the size of profiled bar in any pass and design the proper pass by calculating the deformation and rolling-force of the steel in the pass .
本论文开发的软件的主要功能是通过计算轧件在劈分孔型中的变形以及受力来确定轧件每个道次轧后断面形状从而设计出合理的孔型。
The ban has come into force despite opposition from some bar and cafe owners who fear losing business.
尽管一些酒吧和咖啡馆担心损失生意而反对，该禁令还是会强制实行。
The greater is the continuous bar area, the greater is the restraining tensile force.
穿越后浇带的连续钢筋面积越大，则约束拉力越大；
A section bar of a self tapping screw for saving drilling hole is provided with high-tightening force, which belongs to the design preparation technical field of the section bar.
可免钻孔上自攻螺丝并具有高紧固力的型材，属型材的设计制造技术领域。
The force model of the jig needle bar in the process of grinding diamonds were analyzed, and the calculation formula of grinding force was established.
分析了宝石磨削过程中的夹具针杆的受力模型，建立了基于因次解析法的夹具针杆磨削力计算公式。
The force model of the jig needle bar in the process of grinding diamonds were analyzed, and the calculation formula of grinding force was established.
分析了宝石磨削过程中的夹具针杆的受力模型，建立了基于因次解析法的夹具针杆磨削力计算公式。
应用推荐