This paper deals with the mechanical behaviors of steel-concrete composite beam and effective width of concrete slab on the axial force and the bending moment together function, based on the past job.
本文在总结前人工作的基础上，对结合梁斜拉桥中在轴力和弯矩共同作用下的钢—混凝土组合梁截面受力状态和混凝土桥面板有效宽度进行研究。
Continued to use of tool wear, spindle axial force will be increase, leading to bearing damage, but will also affect the accuracy and effectiveness of engraving.
刀具磨损后仍继续使用，会加大电主轴轴向力，导致轴承受损，而且还会影响雕刻的精度及效果。
Effects of column axial force and rib stiffener on hysteretic behavior of connections were synthetically considered for the first time during cyclic-loading.
在循环加载试验中首次综合探讨了柱轴力大小、加劲肋构造措施等对连接性能的影响。
Measured Q-S curve are back figured by nonlinear optimization approach and model parameters are found simultaneously, then distribution of axial force and skin friction along pile are calculated.
通过非线性优化算法，拟合实测的Q—S曲线，可得到桩土系统的工程力学参数，并由此计算得到桩身轴力及侧摩阻力分布曲线。
The mechanics of its performance are studied by researching the deformation of excavation, the force of anchor and the distribution of axial force.
通过研究基坑的变形，锚杆的受力状态和轴力的分布规律，来分析预应力锚杆柔性支护的力学性能。
Axial force transmission, distribution of skin friction, tip resistance of pile, as well as tress ratio between pile and soil are changing with pillow.
研究了褥垫层厚度变化对桩身轴力传递、桩侧摩阻力分布、桩端阻力发挥、桩土荷载分担及桩土应力比的影响。
The influences of the separating force and axial force of the piercing point bar on the wall thickness of the shell pierced, and on its lateral uniformity are analyzed quantitatively.
定量分析了穿孔轧制力和顶头轴向力对毛管壁厚及其横向均匀性的影响。
Main Outcome Measures: Torsion, bending, and axial stiffness and axial failure force after cyclic loading.
主要测量指标：扭转、弯曲和轴向刚度，以及循环载荷下轴向失效力。
First, I designed components for the shaft, and its role is to drive, Chuan dynamic direction and axial force.
首先，本人设计的零件为轴，它的作用是起到传动作用，传动力的方向和轴力。
First, I designed components for the output shaft, and its role is to drive, Chuan dynamic direction and axial force.
首先，本人设计的零件为输出轴，它的作用是传动作用，传动力的方向和轴力。
By computer simulation, we analysis and study the law of wall rock stress distribution, deformation, the axial force of bolt and the roof-off-strata.
通过计算机数值模拟分析研究了锚杆支护回采巷道围岩应力分布、围岩变形、锚杆轴力及顶板离层规律。
This paper analyses the relativity between bending moment (M) and axial force (N) in calculating ground supporting capacity, and the effect of relativity on reliability calculation.
分析了在地基承载力验算中，弯矩M与轴力N之间相关性的存在，以及相关性对可靠度计算的影响。
Besides the change of supporting axial force reflects that of the diaphragm wall displacement.
此外，支撑轴力的变化反映了地下连续墙体的位移变化。
Only in this context, in order to use equation (13) of the axial force calculations.
只有在这个范围内，才能使用式(13)的轴向力计算式。
The parametric resonances and internal resonances of beams with axial force and supporting motion have been investigated.
本文分析了轴向力和支承运动作用下梁的参数共振和内共振问题。
A balance plate is put into the pump head to balance the axial force without lowering efficiency and a good effect got.
在不降低效率的情况下，在屏蔽电泵的泵头加入平衡盘使轴向力得到平衡，并取得了满意的效果。
The geometric stiffness matrix is composed by the effect of axial force, bending moment and bimoment.
其中几何刚度矩阵由轴向力、双向弯曲和截面翘曲的影响组成。
The effect of axial force in design problems is briefly discussed.
本文还简要地讨论了设计问题中轴力的影响。
LINK8 element is used to model the steel reinforce bar except in the wall. LINK8 can only transfer axial force and has no volume.
除剪力墙中的钢筋本文模型中其他纵筋采用LINK8单元模拟，该单元只传递轴力且没有体积。
Pump axial force and radial force by the rolling bearing box to bear.
泵的轴向力与径向力分别由轴承盒内的滚动轴承来承受。
This paper analyzes the effect of negative friction on pile's axial force and its calculation.
分析研究负摩擦力对桩轴力的影响及基桩负摩擦力的计算。
On the basis of theory analysis, it is deduced that the axial stress is linear distribution, when the steel support is loaded by axial force and moment.
根据壳体理论对钢支撑受力机理进行分析和简化计算，得出钢支撑在轴力和弯矩共同作用下，轴向正应力呈线性分布。
The reduced stresses in the longitudinal bars help to achieve less critical bond condition under the cyclic loading, especially in the lack of column axial force.
降低了的梁内纵筋的应力能在反复循环荷载下获得较为有利的粘结条件，特别是在缺少柱上轴向压力的时候。
Worm compressor in the process of compressed gas, also will inevitably suffer reaction of gas, the force is also in the worm into big radial force and axial force.
蜗杆压缩机在压缩气体的过程中，也同样必然受到气体的反作用力，该力也在蜗杆上形成很大的径向力和轴向力。
Increasing brace pre axial force can effectively control the wall displacement and reduce negative bending moment.
增大支撑预加轴力可以有效的控制连续墙的变形，减小墙身负弯矩。
Increasing brace pre axial force can effectively control the wall displacement and reduce negative bending moment.
增大支撑预加轴力可以有效的控制连续墙的变形，减小墙身负弯矩。
应用推荐