What gives Sensus these towering advantages is its unique Variable Pressure Foaming process.
是什么使这些高大的感觉是其独特的优势，变压发泡进程。
Alkali foaming process for two layer print was introduced to resolve the problem during the process.
总结了双层布印花轧碱起泡相应的生产工艺，解决了轧碱起泡的问题。
Powder compact foaming process for producing aluminum foams consists of mixing, compacting and foaming.
粉末实体发泡法泡沫铝制备工艺包括混合、压制和发泡三个过程。
In welding, foaming process on a number of technological innovation, product quality with the leading industry.
在焊接、发泡工艺上的多项技术革新，使产品的品质领先同行业。
Also FLUENT, which is the large scale CFD software, has been applied to imitate the foaming process of aluminum melt.
利用大型计算流体软件——FLUENT对熔体直通气体发泡法过程进行模拟。
Continuous foaming process with high foaming intensity; It has excellent chemical resistance and abrasion resistance.
发泡密度高且采用连续发泡式发泡，具有优良的耐酸碱性，耐久性。
You have to do this because, in the foaming process, you are continually transforming the milk at the top of the cup into foam.
你必须这样做，因为在奶泡形成的过程中，你要让顶部的牛奶持续转变成奶泡。
On this basis, single bubble formation during the foaming process of molten aluminum is analyzed and the bubble size is estimated.
在此基础上，分析泡沫铝制取过程中单个气泡的产生，并估算气泡尺寸。
Effect in process of metal foams has been analyzed from three factors selection of materials, precursor preparing, foaming process.
从材料选择、预制品制备、发泡过程三个环节分析了在制备泡沫金属过程中可能出现的影响因素。
The effect of different acid catalyst and their content on foaming process as well as the microstructure of the phenolic foams was discussed.
讨论了不同酸固化剂及其用量在树脂发泡过程中所起的作用，以及对酚醛泡沫微观结构的影响。
The foaming process curve under different conditions has been determined in iron bath during smelting reduction of blast furnace dust and sludge.
确定了在不同条件下铁水熔池熔融还原高炉粉尘发泡过程的曲线。
The foaming process is controlled easily since the viscosity of composite melts is quite great, without the addition of viscosity-increasing agent.
由于复合材料熔体自身粘度较大，不需要采用任何增粘措施，发泡工艺简单，易于操作。
Polyimide foams were prepared from poly(ester-amine salt) precursor powder through a foaming process, using aromatic dianhydride and diamine as monomers.
以芳香二酐和二胺为单体，采用聚酯铵盐前体粉末发泡的方法制备聚酰亚胺泡沫材料。
SiC particle-reinforced aluminum foams were produced by melt foaming process, and their deforming activity under quasi-statistic pressing was analysised.
用熔体发泡法制备了碳化硅颗粒增强泡沫铝样品，分析了碳化硅增强泡沫铝在准静态压缩条件下的变形行为。
The height change of foam caused by reduction gas during foaming process was measured under different conditions of treating blast furnace dust in iron bath.
以高炉瓦斯泥为原料，经气相还原气氛煅烧及液相提纯步骤制取铁盐溶液，再采用液相还原法，在有分散剂及包覆剂存在的条件下制备出纳米铁颗粒。
The primary preparing methods of lead foam material such as infiltration casting process, powder foaming process and electrodeposition process were introduced.
介绍了泡沫铅材料的主要制备方法——渗流铸造法、粉体发泡法和电沉积法。
The foaming device has ingenious, convenient and practical structure design, and can be widely used for the foaming process of foam filling agent for building.
本发明结构设计巧妙、方便、实用，可广泛用于生产建筑用泡沫填充剂的发泡过程中。
Based on the foaming process assumptions and the characteristics of the foam microstructure, the closed-cell foam model of a simple cubic unit cell was established.
在对发泡过程进行假设的基础上，根据泡沫材料微结构的特点，建立闭孔泡沫材料的简单立方单胞模型。
The foaming process produces a large number of small, closed gas bubbles, which - in conjunction with the Levapren rubber - ensure the material's special properties.
起泡过程中会产生大量小小的封闭式气泡 —与乙华平橡胶共同发挥作用 —保障了材料的独特性能。
The foaming process of NFA was studied. The results show that the melt foaming process is actually a homeostasis process of bubble nucleation, growth, rheology and collapse.
对以NFA作发泡剂的熔体发泡过程分析表明，发泡过程实际上是熔体中气泡的形核、生长、流变和破裂的动态平衡过程。
This paper introduces the structure of polymer molecule and the foaming plastics and analyzes the influence of molecule structure and dynamic forming factors on the foaming process.
介绍了高聚物的分子结构和塑料的发泡成型，从微观的角度分析了高聚物的分子结构及动态加工因素对发泡成型的影响。
This paper compares chemically foaming process to physically foaming process, introduces main advantages, production machinery and development trends of physically foaming insulation.
本文对比了物理发泡和化学发泡，阐述了物理发泡的主要优点、设备和发展趋势。
The rolling process of closed-cell aluminum foam that was prepared by melt-foaming process was studied, as well as its deformation and failure behavior due to different pass reduction.
研究了采用熔体发泡法制备的闭孔泡沫铝材料的轧制过程，分析了不同道次压下量条件下泡沫铝的变形特点与破坏方式，探讨了影响泡沫铝轧制能力的主要因素。
Effect of foaming time on the density and porosity of foam aluminum was discussed in detail. Evolution of pores in the foaming process was described, and the foaming mechanism was analysed.
详细讨论了发泡时间对泡沫铝密度、孔隙率的影响，描述了发泡过程孔结构的演变过程，并对发泡机理进行分析。
There are three main interior structure defects in the preparation of aluminum foam with melt foaming process such as free-bubble-layer at the bottom, partial free-bubble-zone and heat crack.
泡沫铝常见的内部缺陷主要有底部无泡层、局部无泡区和内部热裂纹。
Experimental results showed that expansion of pores are characterized with transverse flat pore in the early stage of foaming process, so the pores formed and expanded in the form of flat pores.
研究表明，早期发泡的孔隙主要以横向方向长扁孔为特征，主要是长扁孔的形成与扩展。
Then a small quantity of Talc was added to PP/HDPE blend in this study. Effects of the Talc content on the melt strength and microcellular foaming process of the blended system were investigated.
然后在PP/HDPE共混体系中加入少量滑石粉，研究滑石粉的含量对共混体系熔体强度及微孔发泡过程的影响。
The foaming process for raw polypropylene and grafted polypropylene was also studied in twin-screw extruder. It is showed by SEM that grafted polypropylene has more excellent foaming effect than PP.
用双螺杆挤出机对未接枝和接枝的PP进行了发泡研究，SEM分析表明接枝pp具有更好的发泡效果。
This foaming aide keeps those tiny soap bubbles stable throughout the cleanup process.
这种泡沫辅助剂能够让那些微小的肥皂泡泡们在整个清洁过程中保持稳定。
This foaming aide keeps those tiny soap bubbles stable throughout the cleanup process.
这种泡沫辅助剂能够让那些微小的肥皂泡泡们在整个清洁过程中保持稳定。
应用推荐