Its appearance offers a new alternative deal for the rotten-tail building came from the industry foam and a new method for the hotel enterprise whose vacancy rate is high.
它的出现为房地产泡沫过后的烂尾楼工程的处理以及酒店行业空置率过高的企业提供了一种新的方法和思路。
The taking of foam or Charmat Method is the second fermentation in autoclave that makes the wine sparkling, because of the carbon dioxide generated by the yeasts.
提取泡沫或罐式香槟法是在高压炉里的第二次发酵，能够使酒起泡沫，因为酵母产生了二氧化碳。
The filter quality of different foam ceramic filter can be compared by this method.
该方法可以有效的比较不同品种的泡沫陶瓷过滤片的过滤效果。
Development course and kinetics mechanism of foam body expansion were investigated during preparing foam aluminum by powder metallurgy method.
采用粉末冶金法制备泡沫铝材料，对发泡过程中泡沫体膨胀的演变过程及动力学机制进行了研究。
Nitrogen foam thermal flooding is a new method for enhanced oil recovery of heavy oil.
氮气泡沫热力驱是一种新的提高稠油油田采收率的方法。
Addition level, addition method, and boiling intensity of hops had evident effects on both colloid stability and foam quality.
酒花加量、添加方法、煮沸强度对啤酒胶体稳定性及泡沫质量均有明显影响。
It should be emphasized in drawing up new specifications that the method of supplying foam by catenary suspension and flexible connection is also adaptable.
在制定新规范时，应说明悬链和柔性连接供应泡沫的方法也是可以采用的。
Foam article, especially trimming element for the interior of a motor vehicle, and method for producing the same.
泡沫制品，尤其是机动车辆内室的修饰件，及其制造方法。
The porous hydroxyapatite-bioglass duplex ceramic was prepared by the dipping method with polymer foam.
采用有机泡沫浸渍法制备羟基磷灰石-生物玻璃多孔复相陶瓷。
Energy absorption characteristic of a plastic deformation energy absorber filled with aluminum foam in a thin-wall metal tube under quasi-static state was studied by test method.
通过试验方法研究了泡沫铝填充薄壁金属管塑性变形缓冲器在准静态作用下的吸能特性。
Introduce effect and control method of foam on industry fermentation based on formation, perishing and growing rule of the foam, put forward measures of controlling the foam.
从泡沫的形成和消长规律出发，介绍泡沫对工业发酵的影响和泡沫的控制方法，并提出控制泡沫的措施。
The driller adopts truck power and technical method of foam drilling, which solves the problems of deficiency of water source and electrical source in field drilling work.
本文介绍在野外钻探作业中车载钻机的设计思路，该钻机采用汽车动力和泡沫钻进的工艺方法，解决了野外钻探作业中电源与水源的缺乏问题。
Foam plastic is a kind of composite plastics, is produced by foaming method.
泡沫塑料是一种复合塑料，是通过发泡的方法加工出来的。
Practice and results show that the gas survey method with a gas-collecting tank for foam drill fluid samples is another effective method.
实践和资料说明，罐装泡沫样聚气录井方法是泡沫钻井中气测录井的另一种行之有效的方法。
The designing process, structure characteristics and operating method of the EPS foaming mould used in the lost foam casting production of the compressor pedestal were introduced.
介绍了冰箱压缩机底座消失模铸造生产中所用的EPS发泡件成型模具的设计过程、结构特点和使用方法。
The paper gives a brief introduction of the installation, the principle and the Computing procedures for measuring the viscosity of foam solution by the capillary method.
本文介绍了用毛细管法测定泡沫液粘度的装置、原理及计算方法。
Based on the merit of foam, a new drilling method is put forward, that is the foam drilling technique of deep well applied in drought and scarce water areas.
依据泡沫的优点，提出了在干旱缺水地区采用深水井泡沫钻进技术的钻探新方法。
Then the method of calculate of the average foam lifetime with foam and rupture curves was discussed in details.
讨论了由发泡和消泡曲线计算平均发泡寿命的方法。
The microscopic experiment method of study foam displacement mechanism in high pressure porous has been built.
建立了高压多孔介质中泡沫驱油机理的微观分析评价方法。
Property characteristics, preparation method and application of foam metal are introduced briefly.
简要介绍泡沫金属的性能特点、制备方法及其应用。
The experimental result indicates that this measure method is feasible on principle, and has directive meaning for realization of on-line measurement of foam on site.
实验结果表明，该检测方法在原理上是可行的，对于在现场实现溶渣泡沫高度的在线检测具有指导意义。
The preparation technology and its effect factors for polyvinyl formal foam plastic by way of mechanical foaming method were studied.
本文论述了用机械发泡法制备聚乙烯醇缩甲醛泡沫塑料的工艺及其影响因素。
The driller adopts truck power and technical method of foam drilling, which solves the problems of deficiency of water source and electrical source in field drilling work.
依据泡沫的优点 ，提出了在干旱缺水地区采用深水井泡沫钻进技术的钻探新方法。
The surfactant is an important component of phenolic foam plastics. In the paper, the surfactant effects in phenolic foam resins and the method of choosing surfactant are discussed.
表面活性剂是酚醛泡沫塑料的重要组成部分。文中探讨了表面活性剂在酚醛发泡树脂中的作用及表面活性剂的选择原则。
The new method can provide small medium size foam tools and polystyrene pattern for lost foam process rapidly.
此研究可为消失模铸造快速提供中小型发泡模具及其聚苯乙烯泡沫模样。
This paper introduces some preparation method systematically, the special structure and properties of this foam aluminum as well as its application field.
本文介绍了目前泡沫铝的制备方法和研究进展，描述了泡沫铝的结构及特殊性能，并对其在各个领域的应用进行了概括。
Objective: to find good activity surface activity dose which eliminating chromium ion in the waste water by using foam flotation method to determine the kinds of the surface activity.
前言：目的：为找到泡沫浮选法去除废水中铬离子活性较好的表面活性剂，对表面活性剂种类进行探索。
The invention also provides a hydrophilic polyurethane foam structure produced by the method and a wound dressing containing the foam structure.
本发明还提供一种由所述方法制造的亲水性聚氨酯泡沫结构以及包含所述泡沫结构的创伤敷料。
The invention also provides a hydrophilic polyurethane foam structure produced by the method and a wound dressing containing the foam structure.
本发明还提供一种由所述方法制造的亲水性聚氨酯泡沫结构以及包含所述泡沫结构的创伤敷料。
应用推荐