The marines have been exploring ways to reduce that consumption by spraying tents with a foam coating.
海军陆战队已经在探索减少这种消耗的方式，为此他们给帐篷喷洒了泡沫涂层。
The burning-resistance finish is applied by foam coating with CFA, and the resultaccorded with the national standard.
选用CFA阻燃剂，采用泡沫背涂工艺进行阻燃涂层整理，阻燃效果达到国家标准．。
This paper presents the basic concept, process, and formulation of foam coating, and conducts aninvestigation on the factors that affect the results of the coating process.
本文介绍了泡沫涂层的基本含义、工艺及配方；探讨了涂层工艺的影响因素；
The padded arm is constructed of molded urethane foam with an integral coating that cleans easily and withstands disinfection with alcohol or bleach.
扶手由浇铸聚氨酯泡沫制成，带有完整的涂层以便于清洗，能够承受乙醇或漂白的消毒。
The coating behavior of aluminum alloy lost foam casting ( LFC) process has been investigated.
研究了铝合金消失模铸造过程中的涂料行为。
The copolymers are widely used as elastomer, film, foam, coating, hot-melt adhesive, water-based adhesive, textile sizing agent, fabric coat and so on.
醋酸乙烯酯共聚物用途广泛，可用炸弹性体、薄膜、泡沫、涂料、热熔胶、水性粘合剂、纺织上浆剂、织物涂层等。
The feasibility of the foam rubber surface processing by physical vapor deposit coating was discussed.
并探讨了物理气相沉积涂层法对泡沫橡胶表面进行处理的可行性。
The coating behavior of aluminum alloy lost foam casting (LFC) process has been investigated.
研究了铝合金消失模铸造过程中的涂料行为。
In Lost foam process, liquid metal crushing coating is the important cause of metal seeping defects.
金属液压溃涂层是消失模铸造中渗金属缺陷形成的最重要原因。
The results show the relative importance of factors, from most significant to least significant: foam material, metallostatic head, the permeability of the coating, pouring temperature.
试验结果表明，在考虑的工艺因素中，对充型速度的影响由大到小依次为：模样材料、金属静压头、涂料透气性和浇注温度。
GPS coating based on foam polystyrene waste has been prepared to replace the ready-mixed paint for the decoration of interior wall.
研制了以废聚苯乙烯泡沫塑料为基料的GPS涂料，代替调合漆用于室内墙围装饰。
The technological features in EPC were analyzed. It is pointed out that the good wettability between liquidized product of foam pattern and coating layer is helpful to the liquid product removal.
分析了消失模铸造工艺特点，指出泡沫塑料模样液化产物与涂料层间良好的润湿性对其通过涂层排出是有利的。
The results showed that the mica is beneficial for improving the brushability of the coating but detriment to removal of liquidized product of foam pattern.
结果表明 ：云母有助于改善涂料的涂挂性能 ，但对泡沫塑料模液化产物的排除是不利的。
The polystyrene plastic rubber wire core is in a strip shape pressed by a wasted foam plastic hot melt mold through hot melting, wherein the pigment is an environment-friendly waterborne coating.
所述的聚苯乙烯塑胶线材芯为废弃泡沫塑料热熔模压成形条。所述的颜料为环保水性涂料。
The interaction of foam material with the coating also have very important influence on the filling velocity.
模样材料与涂料的交互作用对金属液的充型速度具有非常重要的作用。
The coating permeability in evaluating gas exhausting ability of actual coating wafer is indirect and limited in lost foam casting.
分析了用消失模涂料透气性评价实际涂层排气能力时的局限性。
Products can be used in intumescent coating, PU rigid foam, thermoplastics and UP (unsaturated) resin etc.
所生产的阻燃剂可用于涂料、塑料、热固型树脂、纺织涂层等。
The permeability measuring method and process of the lost foam pattern coating layer was introduced.
介绍了测定消失模涂料透气性的方法及过程。
The interaction of foam material with the coating also have very important influence on the filling velo...
模样材料与涂料的交互作用对金属液的充型速度具有非常重要的作用。
The experimental results show that the water-based coating is applied to lost foam casting of the carbon steel and copper zinc alloy, and has lower lost, higher practicability and better...
试验表明，该涂料可用于消失模铸造铜锌合金件、碳钢件，而且成本低廉，实用性强，具有良好的推广价值。
The experimental results show that the water-based coating is applied to lost foam casting of the carbon steel and copper zinc alloy, and has lower lost, higher practicability and better...
试验表明，该涂料可用于消失模铸造铜锌合金件、碳钢件，而且成本低廉，实用性强，具有良好的推广价值。
应用推荐