Thus this chapter surveys the art of fluidization today .
因此，本章对当今流态化技术作一概述。
These initial successes spawned much interest in fluidization.
这些初始的成功引起对流态化的很大兴趣。
Check if fluidization upstream of rotary feeder is on, if so turn this off.
检查运转的饲料是否在流态化上方，如果是的话关闭这个功能。
The condition of fluidization differs due to different structures of each technique.
由于每种技术的构造不同，流化状态也不相同。
For satisfactory fluidization under these conditions an agitator is used in the bed.
在这些情况下，为了得到满意的流态化，在流化床中加有搅拌器。
The empirical formula on the minimum vibration intensity for fluidization is obtained.
建立了最小流化振动强度的经验关联式。
Fluid flow processes, including fluids transportation, filtration, solids fluidization.
流体流动过程，包括流体输送，过滤，固体流态化。
Particulate fluidization shows a structure of idealized fluidization of complete homogeneity.
散式流态化呈现出一种非常均匀的理想流态化结构。
An experiment is made on spouting fluidization of sawdust or the quartz sand -sawdust mixture.
考察了木屑、木屑与石英砂混合物的喷动流化现象。
Agglomerate particle was put into the fluidization bed to simulate the agglomeration malfunction.
通过向床层中加入聚乙烯块状颗粒来模拟气固流化床颗粒结块现象。
The properties of solid and fluid alone will determine whether smooth or bubbling fluidization occurs.
仅仅固体和流体的性质就能决定产生的是平稳流化还是鼓泡流化。
The experimental research on fluidization characteristic of waste tyre was done in a cold fluidized bed.
在流化床冷态实验台上，对废轮胎的流化特性进行了实验研究。
Objective To observe efficacy of rhubarb and mirabilite on treating fatty fluidization in celiotomy incision.
目的观察大黄、芒硝外敷腹部伤口脂肪液化的疗效。
Porous plates are ceramic or polyethylene in construction which requires minimum air pressure for fluidization.
多孔板是用陶瓷制造的，或者是流化要求气压最低的聚乙烯结构。
The hydrofracturing of Budate Group is mainly related to frequent lithologic characters, tectonism and fluidization.
水力破裂作用的成因主要与布达特群岩性组合特征、构造-流体作用有关。
In this paper, the influence of temperatures on the critical fluidization velocity was analyzed theoretically at first.
本文首先从理论上分析了温度对气固流化床的临界流化速度的影响。
Based on the gray system theory, the influence degree of the different variables on the fluidization quality was analyzed.
通过灰色系统理论方法，分析了各参数对系统流化质量的影响程度。
The fluidization mechanism of high flowing concrete and its application in high rise frame structures are discussed and analyzed.
对高流态混凝土流态化的机理及在高层框架结构中的应用进行了论述和分析。
The expansion ratio is related to the liquid flow rate, fluidization velocity and free descending velocity of the packing material.
填料膨胀率的大小与液体流量、填料的流化速度及自由沉降速度有关。
And the solid loading accord with particulate fluidization in axial, in different radial, the solid distribution were also different.
固体相含率在轴向上符合散式流态化的规律，在不同的径向位置固含率是不同的。
The effects of fluidization number, injection velocity, particle mean diameter and static bed height on jet fluctuation are discussed.
研究了流化数、射流初始速度、颗粒平均粒径及静态床层高度对射流脉动特性的影响。
This paper introduces the application and superiority of fluidization technique in industrial production process of magnetic-particle.
本文介绍了工业生产上流态化在磁粉生产过程的应用及其优越性。
"Also associated with fluidization is stability, [since] by maintaining stability you're able to maximize your run lengths," he continued.
“同时稳定与流态化相关，[因为]维持稳定你能够最大限度地提高您的运行长，”他继续说。
“Also associated with fluidization is stability, [since] by maintaining stability you're able to maximize your run lengths,” he continued.
“同时稳定与流态化相关，[因为]维持稳定你能够最大限度地提高您的运行长，”他继续说。
Investigates experimentally the fluidization and reduction processes and coal - adding conditions of powdered chromite ores in a fluidized bed.
探讨了粉状铬铁矿在流化床内的流化性质、还原过程和加煤条件。
This paper studied the characteristics of fluidization, eating up and electricity on a new-type fluidized bed heat treatment resistance furnace.
对一种新型流化床热处理电炉的流化特性，热态升温特性及电特性进行了试验研究。
If the first stage of the ordinary two-stages regenerator operates well, its result is as good as that of the regenerator with fast fluidization.
模拟计算还表明，只要普通两段再生器第一段密相床流化状况良好，则其烧焦效果与烧焦罐高效再生器的不相上下。
This paper elucidated the theoretical basis for controlling the fluidization parameters by calculating the SGV surface gas velocity in he LLDPE reactor.
通过对LLDPE聚合反应器表观气速(sgv)值的计算，为流化参数的控制提供了理论依据。
The condition of fluidization in the fluidized bed is determined by both the characteristics of the fluidized material and the structure of the equipment.
流化床中，流化状态是由被流化物料的特征及设备的构造而定。
The condition of fluidization in the fluidized bed is determined by both the characteristics of the fluidized material and the structure of the equipment.
流化床中，流化状态是由被流化物料的特征及设备的构造而定。
应用推荐