Experiments show that the use of the two-fluid nozzle allows the production of MAP to be carried out, and the use of the pipe reactor-fluid-bed granulator produces the required spherical DAP.
实验表明，应用二流体喷嘴可以生产磷酸一铵，应用管式反应器—流化床造粒器可以生产出符合要求的球粒状磷酸二铵。
On the basis of fluid mechanics, a comprehensive model for simulating flow field at nozzle exit is developed by using desecrate vortex method.
根据流体力学原理，用离散涡方法建立了在复平面上模拟喷嘴出口流场的一套完整模型。
Fluid can produce strongest internal swirl when the needle is far from the nozzle exit.
可见流体在针阀与喷嘴出口间隙大的时候其内部旋流强度大。
Atomization process of viscous fluid by using airblast three-channel nozzle and effects of different factors on this process was investigated based on the experiment.
研究了粘性流体在三通道气流式喷嘴的雾化过程，考察了三通道喷嘴雾化性能的影响因素。
On the basis of the study, it was obtained that the quantitative relationship between level fluctuations, fluid mixed characteristics in the pool and the nozzle sizes, operation parameters.
在此基础上，得出了反映水口结构尺寸和工艺参数对熔池液面波动和流体混合影响的定量关系式。
The influence of the working fluid pressure and the structure of ejecting nozzle on the outlet temperature, ejecting coefficient and heating efficiency of the ejecting-mixing heater were analyzed.
对多喷嘴引射混合式加热器的加热性能进行了试验研究，分析了工作流体压力和引射孔结构对引射混合式加热器的出口温度、引射系数以及加热效率的影响。
The computational fluid dynamics model of a swirl nozzle is established with the water as the working fluid of atomization.
以水为流体介质，建立了旋流喷嘴的计算流体动力学模型。
This paper focuses on the effect of polymer additives and nozzle shapes on the properties of high-pressure water jet. A method is presented to analyse the fluid flow within the nozzles.
本文研究了喷嘴形状和高聚物添加剂对高压水射流性能的影响，给出了一种分析喷嘴内流体流动的方法。
A new method has been proposed to predict the mass flow rates of a supercritical fluid through a sonic nozzle...
在此基础上，提出了预测超临界态流体通过音速喷管流量的新方法并得到了实验验证。
Results show that the measuring method with the conductivity electrode placed at the nozzle outlet can describe objectively the distribution of the tundish fluid flow.
结果表明，只有将电导电极置于水口出流部位的测定方法才能客观地反映中间包内流体的流场分布情况。
The pulse fluid mechanism is analyzed with circuit simulation on the basis of the structure of pulse nozzle. which will directly avoid calculating the fluid yard and treating the boundary conditions.
针对脉动喷嘴的结构对形成脉冲流体的机理进行了电路模拟分析，从而避开了直接对流体流场的计算及边界条件的处理。
The experimental investigation on the low pressure spray characteristics of swirl pressure nozzle was carried out with the water as the working fluid of spray.
以自来水为喷淋介质，对旋流压力式喷嘴低压喷淋特性进行试验研究。
Numerical 3d simulation and research on inner nozzle and outlet flow field of solid rocket motor of long range missile designed by Russia using STAR-CD computational fluid software.
采用STAR - CD计算流体软件对某俄式发动机的喷管内流场及喷管出口处流场进行了三维的数值仿真与研究。
Based on the onflow theory, a 3-d model of fluids steel was established, calculation program developed the flow character of mold fluid steel on different nozzle conditions in beam blank c.
依据湍动能理论，本文建立了结晶器内钢液的三维湍流模型，开发了计算程序，研究了不同水口状态下异形坯结晶器中钢水的流动特性。
The fluid flow control device includes a nozzle disposed within an exhaust conduit of the engine.
该流体控制装置包括布置在所述发动机的排气管道内的喷嘴。
In view of the line and surface tactility displayed by the pneumatic nozzle array, a fluid-structure coupled finite element model of the finger skin and nozzle was established.
针对气动喷嘴阵列喷气再现线面触觉问题，建立手指皮肤和喷嘴的流固耦合有限元模型。
A nozzle component of the gas cap is formed of a tubular inner member in thermal contact with a metallic outer member, such as copper, that is in contact with a fluid coolant.
气体盖子的喷嘴元件由与诸如铜的、与流体冷却剂接触的金属外部件热接触的管状内部件制成。
The patterns of the pressure fields of fluid jets with the different ratio between nozzle diameters were obtained. Based on the test results, the ranges of the optimum ratio …
研究表明，加长喷嘴井底压力分布比普通喷嘴的高压区和低压区更集中；
The patterns of the pressure fields of fluid jets with the different ratio between nozzle diameters were obtained. Based on the test results, the ranges of the optimum ratio …
研究表明，加长喷嘴井底压力分布比普通喷嘴的高压区和低压区更集中；
应用推荐