The results show that anomaly frequency method is effective for the analysis of high frequency information characteristics in digital subsurface fluid data.
结果表明，异常频次法是地下流体数字化资料高频信息特征分析及其应用的有效方法。
The new data of metallogenic epochs, the zoning of the mineralization, fluid inclusions and deep mining outcrops in the Jinqingding gold deposit have been reviewed comprehensively.
综合评述了金青顶金矿矿化分带、成矿年龄、流体包裹体以及深部采矿露头新资料。
The clinical data of two cases of spontaneous intracranial hypotension syndrome caused by spontaneous cerebrospinal fluid leak were analyzed, and the literatures of these two disease were reviewed.
分析了两例以原发性低颅压综合症为临床表现的自发性脑脊液鼻漏患者的临床资料，并复习这两类疾病的相关文献。
The mudstone sonic log interval, measured stratigraphic pressure and seismic data are integrated to analyze the underground fluid pressure fields in Damintun depression, Liaohe basin.
综合利用泥岩声波时差、实测地层压力和地震资料，分析了辽河盆地大民屯凹陷的地下流体压力场特征。
In view of the above mentioned facts, this paper proposes a set of very useful thermophysical property data of liquid and supercritical fluid for xenon, giving a reference to research workers.
鉴于以上所述情况，本文提出一套很有用的氙的液相和超临界流体相的热物理性质数据，供研究工作者参考。
Realizing data exchange to reflect coupling between fluid and structures is essential to solving static aeroelasticity problems.
研究静气动弹性问题一大关键是要解决流固数据耦合。
The main input requirement is that in order to add a new fluid, a user must enter a full set of data.
主要输入需要，是为了增加一个新的流体。一个用户必须输入整组数据。
A new method based on well logging data and pre-stack seismic inversion parameters, which is called pore bulk modulus method, is presented to quantitatively calculate pore fluid saturation.
提出了一种基于测井数据和叠前地震反演参数的流体饱和度定量预测方法——孔隙体积模量法。
According to author's practice, it has been discussed in this paper how to determine fluid saturations by using the data of tracer concentrations.
本文根据作者的实践，探讨了利用示踪剂浓度资料，确定流体饱和度的方法。
The experimental data of fluid flow in porous core with low permeability were analyzed with simulation theory and plotted as a log log typical curve.
用无因次分析法对低渗透岩心的实验数据进行了分析，得出新的渗流规律。
Testing instrument was installed in sampler at heel of hydraulic pump, put into down-hole with pump, and it can examine water cut of formation fluid, save history curves in real time by data memory.
测试仪器安装在水力活塞泵泵芯尾部取样器内，随泵芯投入井下进行测试，可实时检测地层液的含水率情况，利用数据存储器实时保存历史曲线，提供了全天候观测生产过程的手段。
Automatic control and data processing for preparative supercritical fluid chromatograph.
克级超临界流体制备色谱仪的自动控制和数据处理。
Formation fluid pressure and residual pressure distribution in Gaosheng exploration area are estimated by using acoustic slowness data of completed Wells.
利用完钻井声波时差资料，计算出高升探区地下流体压力及剩余压力分布，并对异常地层压力的成因进行探讨。
It is showed that well logging data can be used to calculate oil and water relative permeability that can satisfy produced fluid types of evaluating reservoir.
结果表明，用测井数据可以进行油、水相对渗透率的计算，并且完全满足评价储集层的产液情况。
By use of this model, the analysis can be done to the well testing data of the reservoir with fluid property change of polymer flooding or alkali-surfactant-polymer flooding.
应用本模型可对聚合物驱或三元复合驱等流体性质变化的油藏的试井资料进行分析。
The pertinent data from the plugs show that the decrease of the fluid permeability is dependent on the cation exchange capacity of the core samples.
实验样品相关测量数据说明，样品液相渗透率的降低与样品的阳离子交换量有关。
According to the general design method of hydraulic fracturing, a fracturing fluid formula in a treatment process is simulated and designed and its feasibility is proved through calculated data.
从理论上分析研究了“边配边注”技术的施工工艺，并借鉴普通水力压裂的设计计算方法，模拟设计了施工过程中压裂液配方，并通过计算数据说明了可行性。
Continuous modeling USES the data collected by DCIM and engineering analysis tools such as computational fluid dynamics (CFD).
连续使用收集的数据建模dcim和工程分析工具，如计算流体动力学(CFD)。
Fluid phase equilibrium data is essential for the design of supercritical fluid extraction column involving the measurement of phase diagrams for ternary mixtures.
流体相平衡数据是设计超临界流体萃取塔的关键。本文给出了涉及三元混合物相图计量的萃取塔的可行性研究和应用的一些例子。
In this paper, spectrum is used for logging data processing and identifying the fluid property of reservoir.
本文尝试把功率谱用于测井信号处理，并对储层的流体性质进行识别。
Measurement of the water salinity of fluid inclusion can offer accurate logging data and calculate irreducible water resistivity data for crude reservoirs.
包裹体中水相盐度的测定能准确提供测井资料，计算原油储量所需的束缚水电阻率数据。
Viscosity is an important character of water-soluble polymer solution, meanwhile, it is basic data for chemical engineering, petroleum and fluid engineering.
粘度是液体的主要传递性质之一，是化工、石油和流体工程等领域中所必需的基础数据之一，是水溶性高分子溶液重要的流变性质。
The invention discloses a gas-liquid-liquid equilibrium data measurement device. An equilibrium still comprises three circulation loop structures for accelerating the circular mixing of fluid.
本发明为一种气液液平衡数据测定装置，平衡釜具有三个循环回路结构，加速了流体的循环混合；
Three methods for the correlation of phase equilibrium data of supercritical fluid (SCF) -solid systems were formulated, and the precision of correlation for these methods were compared.
系统地阐明了超临流体-固体系统相平衡的三种关联方法，对其关联精度进行了比较。
Proposed that a metal cutting database is basically composed of databases of cutting data, tool geometry angles, cutting fluid and unit cutting power.
提出由切削用量库、刀具几何角度库、切削液库和单位切削功率库基本构成金属切削数据库，给出了它们的关系模式。
This paper USES the UG software, establishes axial flow pump's impeller model and fluid model, transfer the model data into the ADINA software.
本文采用UG建模软件，建立轴流泵的叶轮实体模型和流体域模型，通过ADINA软件接口将模型数据导入ADINA软件。
This paper USES the UG software, establishes axial flow pump's impeller model and fluid model, transfer the model data into the ADINA software.
本文采用UG建模软件，建立轴流泵的叶轮实体模型和流体域模型，通过ADINA软件接口将模型数据导入ADINA软件。
应用推荐