The liquid in the pipeline under certain conditions and partially vaporizes into gas state, bubble, formation of gas-liquid two-phase flow which is the process of flash.
管道中的液体在一定的条件下，部分液体气化成气体状态，产生气泡，形成气液两相流这就是闪蒸过程。
Effects of various process variables on average flow velocity of LFC liquid aluminum in the mold have been studied.
研究了各工艺因素对消失模铸造铝液在型腔中平均流速的影响。
It was summarized in present paper that the liquid flow acted in the transfers process, solidification structure and componential segregation.
文章从传输过程、凝固组织和成分偏析等三个方面对液相流动的作用作了综述。
Flow and deformation feature of the metal in the process of liquid extrusion were analysed.
分析了液态挤压过程中金属的流动和变形特征。
Aimed at nonsteady spray combustion flow problems of regenerative liquid propellant gun (RLPG) in process of interior ballistic, mathematical model was established, and numerical method was derived.
针对再生式液体发射药火炮(RLPG)内弹道过程中非稳态喷雾燃烧流动问题，建立了数学模型，给出了具体的计算方法。
The experimental research on the dispersal process of the axisymmetric liquid rings had been performed with the system, and a series of photographs for the flow field were obtained.
轴对称液体环抛撒过程的实验研究已在这种实验设备上完成，并得到了相应的一系列流场照片。
Turbulence two phase flow and combustion process in a liquid rocket engine combustor are analyzed with numerical method, and combustion instability is also studied.
采用数值模拟的方法对液体火箭发动机燃烧室内湍流两相流动与燃烧过程进行了分析，同时研究了燃烧室内高频不稳定燃烧现象。
The firing of enamel frit is a process of "Liquid-phase Sintering". Its mass transfer is based on the viscous flow of the melt.
搪瓷釉的烧成过程是一种“液相烧结”过程，其传质有赖于熔体的粘性流动。
Glass rotor flowmeter is used to measure the fluid (liquid or gas) flow of the process instrumentation.
玻璃转子流量计是一种用来测量流体(液体或气体)流量的过程检测仪表。
The influence of separation process flow, operating parameters and the properties of suspending liquid on the treatment effect was studied, and the optimum process conditions were determined.
研究了旋流处理工艺流程及操作参数、悬浮液性质对处理效果的影响，确定了最佳工艺条件。
In this paper the superheating and vaporization process which occurs in upwards flow of heating liquid in a vertical tube is studied.
本文研究了受热液体在垂直管内向上流动时的过热汽化过程。
In this paper, the process of the liquid flow on the heat tube surface was carried out using computational fluid dynamics (CFD) simulation method.
采用计算流体力学方法(CFD)，对传热管外液体流动过程进行了模拟研究。
The air-liquid two-phase flow of the seed precipitation process in two air-agitated tanks with different structures was numerical simulated in three dimensions.
以两种不同结构的空气搅拌式种分槽为研究对象，完成了晶种分解过程气—液两相流动的三维数值模拟。
A three dimensional incompressible gas-liquid two-phase flow model was proposed to accurately simulate the fluid flow of casting's mould filling process.
为了更精确地模拟铸造充型过程的流动行为，建立了充型过程的三维不可压缩气。液两相流动模型。
A model of the no steady process of gas jet interaction with liquid is developed and solved by the commercial software FLUENT. The change law of parameter in the flow field has been obtained.
建立含能气体射流与液体工质相互作用非稳态过程的理论模型，应用fluent应用软件对非稳态气体射流与液体工质相互作用的过程进行了模拟，获得了射流流场中各参数的变化规律。
The knowledge of the liquid flow in blast furnace may play an important role in controlling the blast furnace process.
高炉内液体流动现象的研究对控制高炉工艺过程具有重要意义。
The multi-bacterial strain liquid- solid combined fermenting process to produce highly active protein has a flow: (1) inclining bacterial strains;
本发明的多菌种液固联合发酵工艺生产高活性蛋白的流程为：（1）斜面菌种；
The continuous emission process of gas bubbles under a constant gas flow rate through a single orifice immersed in a quiescent viscous liquid is studied.
考察一定流量气体，通过锐孔在静止黏性液体中连续溢出气泡的过程。
From the transfer dynamics in perpendicular gas-liquid phase flow point of view, this paper put forward a calculating method of air volume in deep-well process design.
从垂直气液两相流运行动力学角度，提出深井工艺设计中空气量的计算方法。
The burning process of enamel glaze is a liquid-sintered process, whose medium is dependent on the sticky flow of glass state melted objects.
搪瓷釉的烧成过程是液相烧结过程，其传质有赖于熔体的粘性流动。
Widely used for precise control of gases, liquids and other media of process parameters such as pressure, flow, temperature, liquid level maintained at a given value.
广泛应用于精确控制气体、液体等介质的工艺参数如压力、流量、温度、液位保持在给定值。
When the vent opening reduces, the jet flow phenomenon is not obvious, and an obvious process of liquid level dropping could present.
放气口开度减小，射流现象不明显，并出现明显的液面下降过程。
The gas flow and the liquid complete the energy exchange and the material exchange between gas phase and liquid phase in the flowing process.
气流和液体在流动的过程中完成气相与液相之间的能量交换与物质交换。
Introduced is a new kind of liquid hydrocarbon recovery process by natural gas stripping refrigeration and described are its process flow and characteristic.
介绍一种新型汽提气制冷天然气液烃回收工艺，阐述了工艺流程及特点。
Introduced is a new kind of liquid hydrocarbon recovery process by natural gas stripping refrigeration and described are its process flow and characteristic.
介绍一种新型汽提气制冷天然气液烃回收工艺，阐述了工艺流程及特点。
应用推荐