The first factory to produce usable float glass opens in 1959; an estimated 90 percent of plate glass is still produced this way.
第一个生产浮法玻璃的工厂于1959年开业，目前估计有百分之九十的平板玻璃仍然是这样生产的。
Many American businessmen contend, with some justification, that the Japanese dump not only TV sets but also steel, textiles, float glass and radio tuners.
许多美国商人说的有些道理：日本不仅倾销电视机，还有钢铁、纺织品、浮法玻璃和无线电调谐器。
Used as back-up blocks in float glass furnaces.
浮法玻璃熔窑的帮砖。
Quantitative results can be used to improve design and control of annealing lehrs for float glass.
计算结果可供浮法玻璃退火窑设计与控制参考。
Two kinds of circulating cooling water systems are introduced, combining with float glass production.
结合浮法玻璃生产特点，介绍了常用的两种循环冷却水系统。
The weighing error of ingredient is larger, which seriously influences on production of high quality float glass.
由于小料的称量误差比较大，严重制约了优质浮法玻璃的生产。
The function of the weir in the furnace of the thin float glass was studied by using three- mathematics simulation.
利用三维计算机模拟技术，研究了窑坎在超薄浮法玻璃生产中对稳定熔窑内玻璃液流的作用。
In the thesis, we carried through numerical simulation and experimental study of the stretching process of float glass.
本文对浮法玻璃拉边过程进行了数值模拟和实验研究。
The spot distortion flaw on the surface of the float glass has been studied, Using the JCXA-733-type electron microprobe.
借助JCXA- 733型电子探针仪对浮法玻璃表面呈现的光畸变点缺陷进行了研究。
Partial sign for indicate the specs and quantity of the float glass is mixed up and the quantity on the sign is not correct.
部分显示玻璃原片规格和数量的标识摆放混乱且标识中的数量不正确。
An automatic suspend edge roller used in float glass industry was introduced based on the structure and mechanical behavior of the roller.
着重从设备构成和机械特性方面介绍了用于浮法玻璃生产的吊挂式全自动拉边机。
In this paper, a simplified mathematical simulation of heat transfer in indirectly cooling zone of float glass annealing lehr was presented.
本文提出了浮法玻璃退火窑间接冷却区内传热过程的数值模拟方法。
In this paper, on-line stress measurement of float glass was described at first, and then some fundamental concepts of annealing were explained.
本文首先对浮法玻璃在线应力检测作一综合性介绍，然后对有关退火的几个基本概念进行说明。
This paper reveals the relationship between the operations of float glass and the size, location, composition and mechanism of bubble generation.
揭示了生产中浮法玻璃气泡形成的机理、位置、尺寸、组成与操作工艺条件之间的规律。
This paper describes the causes of Angle bump of float glass when conveyed at the cold end while being longitudinally cut on the production line.
探讨了浮法玻璃在冷端输送过程中，玻璃板在主线上纵向掰断并分开所产生的两块玻璃尾端碰角的现象。
Using nepheline syenite as a substitute for feldspar, the batch mixtures were prepared on a composition of float glass and are melted into glasses.
以霞石正长岩取代长石，按照浮法玻璃的成份制备配合料并熔制玻璃。
It is shown by the diagnosis of tin surface layer that the dielectric constant in the tin surface layer is larger than that inside the float glass.
渗锡层诊断证明：渗锡层的介电常数大于浮法玻璃内部的介电常数。
This finding is in keeping with the expected performance based on the difference in thermal expansion coefficients between spacer material and float glass.
这个发现与基于间隔条材料与浮法玻璃之间热膨胀系数差异而预期的性能一致。
The configuration of air separation equipments on float glass line was pictured out and the role of air compressor in air separation equipments was also described.
阐述了空分装置在浮法玻璃生产线上的配置状况及空气压缩机在空分装置中的作用。
This plant has a designed capacity of 450 tons per day of float glass to meet the rising demand for building materials created by China's ongoing construction boom.
该工厂设计产能为每天450吨浮法玻璃，以满足中国正在兴起的建筑热潮对建材的上涨需求。
The energy saving technology of float glass furnace was discussed and the operation skills for saving energy during the running period of furnace were also summarized.
对浮法玻璃熔窑节能技术进行了探讨，特别就熔窑运行过程中实际操作方面的一些节能技术进行了分析总结，并提出了自己的见解。
Amount of the adsorbed water of upper and lower surfaces of float glass is measured, Distribution of the unsaturated group on both surfaces is analyzed by means of XPS.
测定了浮法玻璃上表面与下表面的吸附水量，借助电子能谱分析了浮法玻璃表面不饱和“基团”的分布。
Bubble is the main defect in float glass, arranging bubble under categories on the basis of its origin can provide scientific foundation for avoidance of bubble occurrence.
气泡是浮法玻璃中的主要缺陷，从来源上搞清气泡的分类，能为解决气泡问题提供科学依据。
The technological parameters control must aim at the running characteristics of float glass furnace in its later stage so as to insure the stability of technological regulations.
工艺参数的控制方法必须针对浮法玻璃熔窑运行后期的特点，才能保证工艺制度的稳定。
The PLC double redundant control sys- tem structure , hardware configuration and software running status were described on the basis of PROFIBUS-DP field bus on float glass line .
论述了基于PROFIBUS-DP现场总线的浮法玻璃生产线的PLC双冗余控制系统结构、硬件组态以及软件实现情况。
This paper discussed the causes of pressure fluctuation of melting region in later stage of float glass furnace in detail and the countermeasures to this fluctuation was also introduced.
针对浮法玻璃熔窑运行后期熔化部压力波动形成的原因及对策，做了较为详尽的论述。
This paper proposed to use coal tar and other processed products instead of partial heavy oil for float glass plants and analyzed related market supply, economic and technical feasibility.
主要提出了浮法玻璃工厂使用煤焦油及其深加工产品替代部分重油的可行性，分析了有关的市场情况、经济性和技术可行性。
This paper introduces the study on coordinating use of domestic refractories in large float glass furnaces, deeming that the rational disposition of refractories is an important but complex job.
本文对大型浮法玻璃窑用国产耐火材料配置应用研究作了介绍，认为耐火材料合理配置是一项重要而复杂的工作。
This paper introduces the study on coordinating use of domestic refractories in large float glass furnaces, deeming that the rational disposition of refractories is an important but complex job.
本文对大型浮法玻璃窑用国产耐火材料配置应用研究作了介绍，认为耐火材料合理配置是一项重要而复杂的工作。
应用推荐