The semiconductor layer is patterned into the flexible beam cross above the mass body.
将半导体层构图为位于质量体上方的十字形柔性梁。
In this paper, dynamics of a rotating flexible beam is investigated by the assumed mode method.
采用假设模态法对旋转运动柔性梁的动力特性进行研究，给出简化的控制模型。
The adaptive beam is composed of piezoelectric ceramic sensors, actuators, and a flexible beam.
由传感器、作动器与梁主体结构组成梁式自适应结构。
Time delay filter technique is applied in the control of reducing residual vibration of a flexible beam.
将时滞滤波器技术应用在柔性机械臂残留振荡的控制中，获得了好的控制效果。
In this paper, active control of a rotating flexible beam with time delay is experimentally investigated.
对旋转运动柔性梁的时滞主动控制进行实验研究，验证时滞反馈控制的有效性。
In this paper, the rigid flexible coupling dynamic behaviour of a flexible beam in free motions is studied.
该文研究在大范围运动是自由的情况下柔性梁的刚-柔耦合动力学特征。
The impact dynamics of a rigid-flexible coupling system consisting of a rigid hub and a flexible beam is reported in this paper.
该文研究了刚体-柔性梁系统作大范围旋转运动时的撞击动力学问题。
This paper discusses how to control a two axes magnetic suspension flexible beam system, which is a simplified model for magnetic bearing.
讨论了双轴磁悬挂柔性梁系统的控制问题，该系统是磁悬浮轴承的简化模型。
Due to the flexible beam guidance of the fiber laser, robot, scanner and fiber laser are forming a perfect team for those application tasks.
由于光纤激光器灵活的光束导向，机器人、振镜系统以及光纤激光器本身构成了一个完美的整体，以完成上述的应用任务。
A model of spatial flexible beam element was proposed, and the dynamic equations of elements and branches of the parallel manipulator were derived.
建立了一种空间柔性梁单元模型，推导了柔性梁单元的动力学方程和并联机器人支链的动力学方程。
Dynamic strain of flexible beam was measured by pasted FBG strain sensor, and the results were compared with that by acceleration sensor of piezoelectric ceramic.
研究了粘贴式光纤布拉格光栅应变传感器对柔性梁的动态响应特性，并用压电陶瓷加速度传感器作对照。
The semiconductor layer and intermediate insulator of the SOI are etched in crossed region of the flexible beam cross and in a looped region above the support body.
在柔性梁的交叉区域中和在支撑体的上方的环形区域中对SOI的半导体层和中间绝缘层进行蚀刻。
The trench is etched in the support substrate exposing the intermediate insulator, which is then etched to form a gap between the mass body and flexible beam cross.
在支撑体基底中蚀刻沟道，以暴露中间绝缘层，随后蚀刻中间绝缘层以在质量体和柔性梁之间形成间隙。
According to mechanics, a stiffness model of the flexible beam was established. Then the parameters of the beams were determined by a simulation in finite element method.
根据力学原理，建立了柔性梁的刚度模型，结合有限元法进行仿真分析，确定出梁的结构参数尺寸。
The flexible beam is discretized via the assumed modes and the terms of longitudinal deformations induced by transverse ones are also included in the whole longitudinal DE...
在对柔性梁离散求解时考虑了横向弯曲对纵向变形的影响，最后通过几个例子分析了运动基上柔性梁的动力学行为。
A new model of spatial flexible beam element is proposed. The dynamic equation of the spatial flexible beam element is derived based on the finite element theory and Lagrange equations.
建立一种空间有限元梁单元新模型，基于有限元法和Lagrange方程导出有限元梁单元的运动微分方程。
This paper is concerned with the dynamics and control for planar, large Angle rapid slew maneuvering of a flexible multi body spacecraft, consisting of a rigid central body and a flexible beam.
研究一类构形为中心刚性带挠性梁的航天器平面快速大角度机动的动力学与控制问题。
The connector layer in the crossed region couples the mass body and flexible beam cross, and the connector layer outside the flexible beam cross couples the flexible beam cross and support body.
在交叉区域的连接件层将质量体和柔性梁联接，并且在柔性梁外侧的连接件层将柔性梁和支撑体联接。
This technique makes use of a small flexible mirror placed in the beam of a telescope.
这项技术利用了放置在望远镜光束上的一个小的可弯曲的镜子。
In the connection design of steel structure, the shear plate with high-strength bolt connection is extensively used at the flexible joint where the beam is connected to the weak axis of the column.
钢结构节点设计中，梁与柱弱轴方向的柔性连接常采用剪力板高强螺栓连接，螺栓群所承受的荷载有竖向力和偏心力矩。
The beam motion is divided into two parts: rigid rotation and flexible vibration.
假设梁的运动由刚性回转与柔性振动两部分组成。
Ultrasonic phased array technique can help to achieve flexible, controllable synthesized ultrasound beam by exciting each element of an ultrasonic array transducer with independent phase delay.
超声相控阵技术通过对超声阵列换能器中各阵元进行相位控制，获得灵活可控的合成波束。
The model of a spatial flexible rotor beam element is presented, and the dynamic equations of spatial manipulators considering joint and link flexibility is derived.
提出了空间柔性转子梁单元模型，建立了考虑关节及杆柔性的空间机器人动力学方程。
Provides a directed, concentrated beam of light owing to its 50 cm long flexible arm.
有50厘米长的柔性灯臂，可以提供直接、集中的光束。
This paper studies the discrete time optimal control of a flexible cantilever beam with time delay in control.
对考虑时滞影响的柔性悬臂梁的离散最优控制进行研究。
A flexible model of multi-axle vehicle ride comfort is presented by combining the vibration theory of elastic beam and modal analysis method.
运用弹性梁弯曲振动理论和模态分析法建立了多轴汽车平顺性分析的柔性模型。
Wire rope and assembly pulley on the flexible pumping units replace balance beam and connecting rod on regular pumping units.
柔性抽油机结构上使用钢丝绳和滑轮组替代了常规抽油机的游梁和连杆。
This type of equal arm balance with double beam and pan adopts flexible steel band as support without abrasion to the edges of the knife.
复梁式双盘等臂天平，采用钢带弹性作支撑，无刀口磨损现象发生。
In this thesis, based on the dynamics of flexible multi-body systems, the analysis of dynamical systems of cable-strut and beam steel structure and the corresponding simulation research is addressed.
本文基于柔性多体系统动力学对索杆梁钢结构施工动力学的理论进行了研究并研制了相应的仿真软件系统。
It focuses on the effects of time delay which was ignored in the previous research on the saturation control of a flexible cantilever beam.
考察在以前的研究中所忽略的时滞，对于柔性悬臂梁振动的饱和控制究竟可以产生什么影响。
应用推荐