The tabulated data or surface fitting parameters of these patterns were used as characteristic vectors.
以谱图表列数据或曲面拟合参数为放电样本的特征量。
Rational aligning calculation of propulsion shafting in cold and warm conditions, and confirm several fitting technics parameters include of temporary supports, sags and gaps between flanges.
在冷热两种状念下进行了轴系合理校中计算，并确定中间轴临时支承的位置、法兰间偏移与曲折值各安装工艺参数。
A equation was used to fit the data of SWCC, and the relation between fitting parameters and dry density was studied.
通过水分特征曲线方程对试验数据的拟合，研究了拟合参数随干密度的变化情况。
Also discussed are the fitting results, the effect of these parameters on cells efficiency and the ways for improving efficiency.
最后分析拟合结果，讨论了这些参数对电池效率的影响，提出提高效率的方法。
These three parameters, determined by fitting vapour pressure, vapour volume and liquid volume, are all function of temperature.
由同时拟合蒸汽压、汽相体积和液相体积确定的三个参数都是温度的函数。
To solve the problem of ellipse - object - shape parameters detection in noise image, a new detection algorithm using nonlinear data fitting model and cross-reference iterative method is proposed.
为提高噪声环境下椭圆类物体形状检测算法的稳定性与准确性，本文提出非线性数据拟合模型结合交叉参考迭代的新思路。
The parameters of glue damage development were obtained by the fitting curves of fatigue experiments.
通过胶层材料的疲劳性能实验曲线拟合得到损伤演化参数。
A compound digital filtering method and a line fitting method based on the least squares are presented, which are used in the measurement system of interface parameters of artillery.
本文提出了一种复合数字滤波方法及基于最小二乘原理的直线拟合方法，用于实现火炮接口参数检测系统的滤波和线性度拟合。
Fitting of relaxation modulus master curve for solid propellant and W. L. F. equation parameters.
推进剂松弛模量主曲线及W.L.F。方程参数的拟合处理。
Objective: To provide endosteal parameters of the proximal humerus for designing of humeral prosthesis stem fitting Chinese.
目的：为设计适合国人的肱骨头假体柄提供相关髓腔参数。
The creep mechanical parameters of Jintan rock salt are obtained with fitting tests data into the model.
最后，根据盐岩三轴蠕变实验结果拟合得到了金坛盐岩的非线性蠕变力学参数。
Finally, the parameters of constitutive equation are obtained by fitting test data, the theoretic results is proved well by comparison with the experimental results.
最后通过实验数据拟合得到本构方程中的参数，将理论结果和实验结果进行比较，结果显示，两者吻合性较好。
Combined with the fitting parameters obtained from the VG model, the effects of mineral composition and pore structure of the soil on SWCC are analyzed.
结合VG模型拟合的参数，着重分析了矿物成分和孔隙结构对膨胀土土水特征曲线的影响。
Consequently, with the use of curve fitting method, the inversion of all seismic lithologic parameters can be easy achieved, and zero-offset section can be obtained.
所以利用曲线拟合方法很容易实现全部地震岩性参数的反演，并可提取零偏移距剖面。
Select the appropriate inverse modes and parameters, it can improve the inversion results of the fitting degree.
在适当的选择反演模式和反演参数后，能够提高反演结果的拟合程度；
An advanced simulated annealing method is presented to estimate the global optimal parameters of fitting carves of target's dynamic distribution.
采用了改进的模拟退火技术对这种分布特性进行全局最优拟合曲线参数估计。
Some parameters can be obtained from the fitting results, such as adsorption equilibrium constants of additives.
由拟合结果可得到一些参数值，如吸附平衡常数等。
By fitting the experimental data, the cluster unit rheological parameters of different fly ash content concrete were determined.
并通过对试验数据进行拟合，确定不同粉煤灰掺量混凝土簇单元的流变参数。
In this paper, the non-linear objective function is treated by means of the complete linearization method and the fitting parameters are restricted by using the punished function.
本文利用完全线性化方法处理非线性目标函数，用惩罚函数法对拟合参数约束。
Not only are got the fitting values of important parameters, but also the fitting precision is similar to the result of that fitting with polynomial model.
获得了重要待定参数的拟合值，拟合精度接近多项式模型的结果。
This paper discusses the problems of optimizing parameters and robust estimation for GPS height fitting.
本文研究了GPS高程拟合时对所建立的数学模型进行参数优化选择和稳健估计。
In this paper, judgements of markedness of fitting model parameters are studied and elevation abnormality models are built on the basis of the principle of data diagnoses.
从数据诊断原理出发，研究了对拟合模型参数作显著性数据判据，据此建立高程异常模型。
When the condition changes, fitting degree of observed data and prediction accuracy of the model are enhanced through rolling optimization and modifying model parameters.
在工艺状况发生改变时，通过对模型的滚动优化，修正模型参数，来提高模型对实时观测数据的拟合程度和预测的准确性。
In this paper a direct fitting method is presented. The physical parameters of nonlinear structures can be identified by this method.
本文采用直接拟合恢复力模型的方法，逐步给出非线性结构的全部物理参数。
Therefore, strengthening the investigation and experiments so as to get the proper parameters, this is the way we should take when defining a fitting area of oasis.
因此，加强调查和试验研究，准确率定参数，是合理确定绿洲适宜面积的努力方向。
At last, through establishing optimal fitting parameters, it is shaped the model of Ferguson bicubic curved surface to surface fitting.
通过弗格森双三次曲面为研究模型来建立最佳的拟合参数。
Based on the unified creep model and the relevant creep equations, the creep properties of rock under step load is studied, and the corresponding creep parameters by fitting curves are obtained.
根据统一蠕变模型和该模型导出的蠕变方程，研究了分级加载条件下的岩石蠕变特性，并且通过曲线拟合得出了相应的蠕变参数。
Based on the unified creep model and the relevant creep equations, the creep properties of rock under step load is studied, and the corresponding creep parameters by fitting curves are obtained.
根据统一蠕变模型和该模型导出的蠕变方程，研究了分级加载条件下的岩石蠕变特性，并且通过曲线拟合得出了相应的蠕变参数。
应用推荐