The finite temperature field theory have two formalisms imaginary time and real time formalisms.
有限温度场论包括虚时和实时两种理论形式。
Through this model and using finite temperature field theory, we can write down the partition function of the system.
通过这一模型加上虚时温度场论就可以写出核物质系统的配分函数。
Finite element difference method was used to simulate the temperature field of work piece during TSCR.
采用有限元差分法对连铸连轧生产过程的带钢温度场进行模拟。
Using the finite element method software ANSYS, the stator temperature field of the hydroelectric generator is analyzed and calculated, the corresponding temperature field picture is given.
在此基础上应用有限元法的通用软件ANSYS，对大型水轮发电机定子温度场进行分析与计算，绘制了相应温度场图。
The results of transient temperature field calculated by finite difference method and ANSYS software agree with the experimental results.
高压氮气淬冷温度场的有限差分法计算结果和ANSYS有限元分析软件计算结果与实测结果吻合较好。
Numerical solution is given to mathematical model of formation temperature field by full implicit finite difference method.
并利用有限差分方法，对温度场数学模型进行数值求解。
According to the trial, we use finite element analysis program to conduct temperature field and thermal stress analysis of the pier under sunshine, and compared the outcome with experimental results.
根据试验采用有限元分析程序，进行日照作用下桥墩的温度场和温度应力分析，并与实验结果进行对比。
A kind of finite elements for the temperature field analysis in shells is presented in this paper.
构造了一种适用于壳体温度场分析的壳体温度单元。
Finite Difference Method (FDM) is usually used for calculating the temperature field of casting solidification processes.
有限差分方法是凝固过程温度场解析的常用数值计算方法。
By making use of thermo field dynamics (TFD), we construct the thermal superposition states in finite temperature.
作者利用热场动力学方法(TFD)，提出了具有有限温度的热叠加态。
Using the finite differential method we calculate the temperature field and frozen depth of pavement proper when the road is freezing by degrees with moisture migration.
采用有限差分方法，完成了土基冻结逐渐进行且伴随有湿迁移的路面体温度场的计算和冻结深度的确定。
By using the Finite Element Method (FEM), the nonlinear thermal vibration characteristics of composite laminated plates under linear temperature field were investigated.
采用有限元方法研究复合材料层合板结构在线性温度场作用下非线性热振动特性。
The temperature field and microstructure field during laser heat treatment process were calculated using Finite Element Method or Finite Difference Method.
应用有限元和有限差分方法对激光热处理过程的温度场、组织场进行了数值模拟计算。
This paper used the finite element method to compute the temperature field, and combined finite element with analytic solution to develop a calculation of thermal stresses.
本文采用有限元数值分析方法计算多层圆管的温度场，并把解析解与有限元相结合，提出一种求解其热应力的计算方法。
In this paper, effects of material's mechanical character, microstructural anisotropy, on instantaneous temperature field is analyzed by means of the finite element method.
本文通过有限元方法计算，分析了材料力学性质细观各向异性对温度场的影响。
Finite element method is applied to solve the field with the temperature field characteristic, then the ampacity of buried cables is received after iterative computation.
根据土壤直埋电缆的温度场特性，利用有限元法对热场进行剖分和计算，经过迭代计算出有土壤直埋电缆的载流量。
The influence of different EB scanning tracks on the brazing temperature field is discussed by the finite element analysis method.
本文通过有限元分析的方法讨论了不同电子束扫描轨迹对钎焊温度场的影响；
The temperature field of the bar in and out the deformation zone during continuous rolling is simulate by finite element method.
采用有限元法分析了棒材连续热轧中变形区及出变形区时轧件横断面温度场。
The three dimensional non linear finite element analysis of the transient temperature field during intermediate frequency quenching of diesel crankshaft was simulated by using of ANSYS.
利用ANSYS有限元分析软件，采用三维非线性有限元方法对柴油机曲轴中频淬火瞬态温度场进行了模拟计算；
This paper simulates the temperature field associated with laser surface quenching using ANSYS - a finite element analysis software, and a series of studies are carried out based on this simulation.
本文结合先进的大型有限元分析软件ANSYS，对激光表面淬火的温度场进行有限元模拟，并在此基础上，对此展开一系列研究。
In this paper, temperature and stress field on the bottom had been simulated using finite element method.
本文运用有限单元法，对钢包底的温度场和应力场进行了数值模拟。
The geometry models and numerical calculation models of temperature field in single-heat and multi-heat sources furnaces are established through finite element method.
采用有限元法建立了单热源合成炉和多热源合成炉温度场的有限元几何模型和数值计算模型。
In this paper, the distributions of the temperature and flow field are derived for a cable transformer coil by solving the finite element equations.
对一个电缆变压器的绕组，通过求解有限元方程，得到其温度场和热气流场的分布。
Using enthalpy to deal with latent heat of solidification the numerical model is solved by finite element method, and a steady temperature field can be obtained under a certain condition.
在此基础上采用有限单元方法数值求解模型，并运用热焓法处理凝固潜热，得到了一定工艺条件下的稳态凝固温度场。
By use of finite element analysis software ANSYS, the steady-state temperature field and thermal stress field in the tubesheet of a large fixed tubesheet heat exchanger were analyzed.
采用有限元分析软件ANSYS，对某大型固定管板式换热器管板的稳态温度场和热应力场进行了三维有限元分析。
The fundamental equations in finite element method for unsteady temperature field elastic plane problem are derived on the bases of variational principle of coupled thermoelastic problems.
在耦合热弹性问题变分原理的基础上，导出非定常温度场热弹性平面问题的有限元法基本方程。
Based on theories of computational fluid dynamics and heat transfer, an axial symmetry finite element model of velocity and temperature field of spot welding for aluminum alloy is established.
根据计算流体力学与传热学原理，建立了描述铝合金电阻点焊液态熔核流动行为和传热过程的轴对称有限元模型。
Based on theories of viscoelasticity and heat transfer, the stress field of reflective crack under the temperature field is studied by finite element simulation.
考虑了沥青混合料的热粘弹特性，结合热传导理论，通过有限元数值模拟，研究在温度场作用下反射裂纹的应力场。
In this thesis the heat transfer theory and the finite element method are used to simulate the two dimension temperature field and the three dimension temperature field.
本文应用传热学基本原理和有限元基本方法，完成了二维、三维导热温度场的有限元数值模拟。
In this thesis the heat transfer theory and the finite element method are used to simulate the two dimension temperature field and the three dimension temperature field.
本文应用传热学基本原理和有限元基本方法，完成了二维、三维导热温度场的有限元数值模拟。
应用推荐