The three loading type are studied and analyzed, and calculated with finite element method for compressive stresses and interlaminar shear stresses distribution on 1-3 face.
本文对这三种加载形式进行了研究和分析，并用有限元素法计算了这三种加载形式在1—3面内的压应力和层剪应力的分布。
By Using the tension spline function, a type of twelve-nodes tension isoparametric finite element has been constructed.
本文利用张力样条函数，构造了一种十二节点张力等参有限单元。
The program of the Finite Element Method has been made, and this penalty element can be quite easily assembled into the program as a new element type.
编制了有限元程序，把这种罚单元作为一种单元类型组装到程度中去；
The paper presents a new type CAM reductor, and also USES finite-element method to analyse the mechanical character of the new type CAM reductor.
提出一种新型凸轮减速器，用有限元方法分析了这种新型凸轮减速器的力学特性。
This topic through a section bus half load bearing type body frame finite element analysis computation, seeks the truly feasible body frame lightweight way.
本课题通过一款大客车的半承载式车身骨架有限元分析计算，寻求确实可行的车身骨架轻量化途径。
The finite element analysis and the experimental measurement for GYF-280 type high pressure re-actor were presented.
介绍了GYF-280高压反应釜有限元分析情况和实验测量结果。
The static strength and stiffness of the framework of motor-reversing type pumping unit is analyzed by the finite element method.
应用有限单元法对电动机换向抽油机支架进行了静态分析，计算其静强度和刚度。
In this paper, the dynamic responses of jacket-type offshore platforms under random sea waves is studied, and the finite element of spatial frame is adopted.
本文分析研究了导管架平台结构在随机波浪作用下的动力响应问题。采用空间刚架单元建立有限元方程。
Described are the development target, main technical features and parameters, main structure, finite element calculation results and testing of the 4d-axle welding frame type bogies.
介绍了4d轴焊接构架式转向架的研制目标、主要技术特点和参数、主要结构、有限元计算结果及试验情况。
Proper material features and entity unit type were used for intellectual finite element mesh division.
采用合适的材料性质和实体单元类型对模型进行智能有限元网格划分。
This paper describes the finite element analysis model, load condition and results of C37-type hopper car body exported to Australia.
介绍了出口澳大利亚c37型漏斗车车体有限元分析模型、载荷工况和结果。
A new type of clutch flywheel needs to determine the limited strength under high centrifugal stress. Finite element analysis and burst spin tests of the flywheels has been done.
为确定一种离合器飞轮新产品在大离心力作用下的总体强度储备，对飞轮在离心力场及配合应力作用下的应力分布作有限元分析，并进行了超速破坏试验。
Finite element software of ANSYS has been used for making a finite element analysis of a certain type of ball-socket nozzle's pendulous socket in solid-rocket engine.
本文应用an SY S有限元分析软件，完成了对某型号固体火箭发动机珠承喷管摆动接头的有限元分析。
The structural features of a new type of railcar bogies are described. And the finite element strength analysis is made on the frame assembly.
介绍了一种新型轨道车辆转向架的结构特点，并对其构架总成进行了有限元强度分析。
The article major talks about the earth seepage failure type and the theory of limited cell seepage flow calculation. And about to establish the finite element seepage flow model.
论文重点讨论了土的渗漏破坏类型和有限元计算堤坝渗流计算原理，建立有限元计算模型。
After the modal analysis of the housing of the SKR-4DL type winding machine with finite element method, the virtual instrument was applied to the on-line vibration property testing on the housing.
采用有限单元法对SKR - 4dl绕线机箱体进行模态分析后，利用虚拟仪器对箱体进行振动特性的在线检测。
In this paper, a new type of elements and the stiffness matrix have been developed, which can be used to eliminate the singularity in the finite element model such as space truss and frame.
本文提出了一个用于消除空间杆梁结构有限元模型中的无刚度“奇点”的元素及相应的刚度矩阵计算公式。
The finite element model of rubber dynamic auxiliary seal ring which was installed on the pusher type mechanical seal was established.
建立了滑移式机械密封装置上动态辅助橡胶密封圈的有限元模型；
A type of synchronous motor is taken for example and temperature field in rotor is calculated in use of 3d Finite Element Method.
以某型同步电动机为例，采用三维有限元法计算了实心转子的温度场，计算结果与实测结果相接近。
This article advanced a general finite element analyse model which is suitable for any roller number for the roller-type overrunning clutch outer loop.
针对滚柱式超越离合器外环提出一种适用于滚柱数目为任意个的通用应力分析模型。
The influence of geometric parameters on stepped T-type RHS joint was studied by using finite element method considering material and geometrically nonlinear effect.
采用能处理几何非线性和材料非线性影响的有限元方法，研究了几何参数变化对弯矩作用下不等宽t型方管节点性能的影响。
Based on Gurtin type variational principle a finite element method for initial value problems is presented by functional analysis. It is used for problems of beams dynamics.
从卷积型变分原理的泛函出发，通过分析泛函中的各项，推导出求解动力响应问题的时-空有限元法，并将其应用于梁的动力问题中。
By the use of a finite element method the authors have calculated the stress and rigidity of a main reduction gear box case body for a certain type of cement mill.
应用有限元法对某型水泥磨机主减速齿轮箱箱体的应力和刚度进行了计算。
The strength of a new type compensated pulsed alternator rotor is studied by using a simplified model, and the results are compared with the ANSYS results using a finite element model.
采用力学简化模型和有限元模型，对一台新型补偿脉冲发电机转子部件进行了强度计算。
Based on pile-up beam tests and finite element analysis of reinforced con-crete, a new type formula of reinforcing steel stress for reinforced concrete pile-up beam is established in this paper.
本文根据试验和有限元计算结果，建立了一种受拉钢筋应力控制计算公式。
This Dissertation take JQ900A type Erector as research object, Using the finite element analysis software ANSYS to simulate the structure.
本文以JQ 900a型架桥机为研究对象，运用有限元分析软件ANSYS对架桥机结构进行模拟。
ObjectiveTo establish a three-dimensional finite element model and make mechanical analysis of "v" -type atlantoaxial reduction and internal fixation.
目的建立新型寰枢椎复位内固定器的三维有限元模型，并对其进行生物力学分析。
The calculation method of transient temperature field and stress field of a new type brake disc is put forward on the basis of 3dimentional cycle-symmetric finite element model.
基于三维循环对称有限元模型，提出了机车制动盘制动过程中温度场和应力场的计算方法。
Objective Three dimensional finite element method (FEM) is suitable for the analysis of the stress and deformation of the internal fixation plate and its modified type of the centrally convex shape.
目的三维有限元法(FEM)适于内固定钢板和其改为中心外凸形状进行应力和变形分析。
In this paper, the shear behavior of a new type of high-strength cold-formed ultra-thin-wall steel wall frame was analyzed mainly by the finite element method.
采用了有限元法对冷弯薄壁型钢单榀墙架结构的进行受剪性能的分析。
应用推荐