Therefore, it is feasible to simulate the force state of slide-resistant pile with finite element software ANSYS.
因此，用ANSYS有限元软件模拟抗滑桩的受力状态是可行的。
Based on the above theory, finite element software is developed to analyze the geometrically nonlinear stability of slender structure.
基于上述理论，开发了可考虑几何非线性效应的细长结构稳定性分析软件。
However, global structural stress and strain distribution can be calculated quickly, correctly and intuitively by finite element software.
而用有限元软件进行计算能够快速、准确、直观地得到结构上各部位的应力、应变等参数的分布情况。
Furthermore, the method to analyze the damage of lining structure by current finite element software ANSYS is also valuable to other concrete structure and components.
文中论述的利用通用有限元软件ANSYS实现衬砌结构损伤分析的方法，对其它混凝土结构和构件的损伤分析也具有参考价值。
By ANSYS finite element software, the test beams were simulated and analyzed.
通过ANSYS非线性有限元软件，对试验梁进行了模拟分析。
The perforation process of steel tube extrusion is simulated by finite element software.
利用有限元软件模拟钢管挤压穿孔过程。
Simulation of the plate rolling was performed using the dynamic explicit finite element software.
采用显式动力学有限元软件来模拟中厚板轧制成形过程中的平面形状控制问题。
Sheet metal digital incremental forming process is simulated with finite element software LS_ DYNA.
利用有限元软件LS_DYNA模拟金属板材单点渐进成形过程。
A new model of flow in a twin rotor continuous mixer was analyzed with the finite element software ANSYS.
文中利用有限元软件ANSYS对S形转子连续混炼机的流场进行了模拟分析。
The thermal module of the finite element software ANSYS is used to analyze the heat transfer of the gearbox.
该研究使用ANSYS有限元软件的热分析模块进行变速箱热传导分析计算。
The state of steel arch centering under construction loads is analyzed by the finite element software MIDAS.
利用有限元软件MIDAS，对钢拱架施工的受力状态进行了数值分析。
The sustainability of perforating casing with screw holding is analysed by using the finite element software ANSYS.
文章利用ANSYS有限元分析软件，对螺旋布孔射孔套管的承载能力进行了分析。
Abstract :Near-isothermal canned forging for molybdenum powder sinter was investigated by using finite element software.
运用有限元软件对钼粉烧结体近等温包套锻造成形过程进行了分析。
Finally, the modal analysis is obtained and the resonance frequency is determined by using finite element software ANSYS.
再用有限元软件ANSYS进行模态分析，确定了共振频率。
The mechanics calculation and analysis are conducted to the original design and improvement plans with finite element software.
用有限元软件分别对原设计和改进方案进行了力学计算和分析。
This text mainly introduced the application of the common finite element software ABAQUS in lean concrete base asphalt pavement.
主要介绍了有限元通用软件ABAQUS在贫混凝土基层沥青路面中的应用问题。
A numerical model for the solidification process of slab continuous casting was built by nonlinear finite element software MARC.
利用非线性有限元软件MARC，建立板坯连铸凝固过程的数学模型。
The heat transfer and stress of submerged-arc furnace contact shoe under steady state was analyzed by using finite element software.
利用有限元软件对矿热炉铜瓦稳态工况进行传热和应力分析。
The simulation of aluminum alloy plate tungsten inert gas welding (TIG) process using finite element software-ABAQUS was researched.
利用ABAQUS有限元软件对铝合金平板钨极氩弧焊(TIG)焊接过程进行了数值模拟。
The dynamic fracture process of sea ice interacting with JZ20-2NW platform is performed on the basis of finite element software—LS-DYNA.
通过有限元软件LS-DYNA模拟了海冰与JZ20-2NW北高平台相互作用的动态断裂过程。
Make use of table analysis, modal analysis of ANSYS finite element software motive force to analyze shake stress analysis of the arch dam.
利用ANSYS有限元软件动力分析中的谱分析、模态分析功能，对拱坝进行地震动应力分析。
To K8 reticulated shell with welded hollow spherical joints, for example, the model is successfully imported to finite element software SAP2000.
以K8型焊接空心球网壳为例，在SAP2000有限元软件中实现了“短杆模型”的导入。
The CAE technology and PATRAN finite element software were used in three-dimension simulation and analysis for three axis turntable frame system.
三轴转台框架系统的三维模拟与分析，采用CAE技术，使用PATRAN有限元软件。
The mechanism motion in the process of impact should be precisely simulated, the adopted finite element software must have corresponding function.
要正确模拟碰撞过程中机构的运动情况，所采用的有限元软件必须具备相应的功能。
The front deflection of high precise and heavy-duty rotating center in P60S rolling-gear machine was analyzed by using finite element software ABAQUS.
利用ABAQUS有限元软件分析P60S滚齿机上的高精度重型回转顶尖的挠度。
Based on secondary development technology, the large universal finite element software ANSYS could remedy its inadequate specialization with APDL language.
大型通用有限元软件ANSYS可以利用APDL语言，通过二次开发技术，弥补本身专业化不足的缺陷。
Exploring the law of tress variety of bridge's key parts in construction process, and the value of the finite element software in engineering construction.
探讨桥梁关键部位在施工过程中的应力变化规律，以及有限元分析软件在工程建设中的应用价值。
In this paper, the static analysis of Hydroplan of hydropower station engineering of Xianrendong is performed by using the finite element software of ANSYS.
本论文通过有限元分析软件ANSYS对贵州省纳雍县仙人洞水电站的厂房工程进行了结构静力分析。
In this paper, the numerical simulation on the wholly rolling process of trio cross wedge rolling has been finished, by using finite element software DEFORM.
本文通过DEFORM有限元软件理论建模，对三辊楔横轧整个轧制过程进行了模拟计算。
In this paper, the numerical simulation on the wholly rolling process of trio cross wedge rolling has been finished, by using finite element software DEFORM.
本文通过DEFORM有限元软件理论建模，对三辊楔横轧整个轧制过程进行了模拟计算。
应用推荐