Through the comparison of modal shape of floating caliper brake system elements by finite element modal analysis and experiment modal analysis, the validity of finite element model is confirmed.
通过对比浮钳式盘式制动器各零部件的有限元模态分析和试验模态分析所得出的模态阵型，验证了有限元模型的正确性。
By comparing the results obtained from the test and finite element analysis, a very good agreement is found, showing the accuracy and feasibility of the simulation with finite element method.
将有限元模拟结果和试验结果进行了比较，取得了较好的一致，验证了有限元分析的正确性和可行性。
Using general-purpose finite element program ANSYS, a three-dimensional finite element model of interaction between raft foundation and groundwork soil is established.
结合大型有限元软件ANSYS，建立了筏形基础地基相互作用体系的全三维有限元模型。
On the basis of the finite element solution to elastodynamic problems, we propose a new method of finite element elastic wave migration.
本文在弹性动力学问题的有限单元解的基础上，提出了一种弹性波偏移的新方法——有限单元法弹性波偏移。
Super finite element method is a semi-continuous method to unit quadratic division on the basis of ordinary finite element division.
超级元法是在普通有限元划分的基础上进行二次大单元划分的一种半连续化方法。
Compare to the conventional finite element method and common-used time integration methods, the space-time finite element method has some advantages in precision and stability.
与传统的有限单元法和常用的时间积分法相比，时空有限元在精度和稳定性方面具有一定的优越性。
A finite element method with high accuracy is presented in this paper, which is used to form the finite element difference method.
给出了一种有限元高精度方法，即有限元差分法的一般构造原理。
The emphasis is placed upon the numerical methods, including finite difference method, finite element method, boundary element method and so on.
着重讨论了包括有限差分法、有限元法和边界元法等在内的数值方法。
The differential equation can be solved by finite element technique, and the calculation process was done by the finite element technique software ANSYS.
应用有限单元法对温度场微分方程进行求解，计算过程借助有限元分析软件ANSYS完成。
At present, the common numerical methods are finite difference, finite element, boundary element, integration equation and transmission line method.
目前，解决这类问题的数值方法主要有有限差分法、有限元法、边界元法、积分方程法、传输线法等。
The pressure equation is solved by mixed finite element method, while the concentration equation is solved by finite difference-streamline diffusion finite element method, that is, using SD f.
提出了解不可压缩两相混溶驱动问题的一种新的数值方法，压力方程用混合有限元求解，浓度方程用差分流线扩散方法求解。
Therefore, we adopt finite element software to establish finite element model of local deck structure, calculate structure stresses and to check its strength.
因此采用大型有限元计算软件建立甲板局部结构模型，对系泊工况下甲板局部加强进行强度校核。
Advanced numerical simulations were introduced in soil water research, such as finite analysis method, characteristic finite element method, and alternating direction finite element method.
土壤水研究的数值模拟方法也有一些突破，如有限解析法、特征有限元法、交替方向有限元法等。
Ordinary finite element and finite difference methods are often used for seepage calculation, while storage centered finite element method is rarely applied to practice.
普通有限元方法和有限差分方法是渗流计算中常用的数值方法，而贮量集中有限元方法则很少被实际应用。
A computer program written by the finite element language is very like a finite element paper or textbook and very easy to understand, modify and maintain.
采用有限元语言编写计算机程序就象书写有限元论文或教科书那样方便和清晰，并很容易修改和维护。
A new algorithm, locally twitch finite element method is developed on the base of the general finite element method, mixed with total-variation-diminishing (TVD) scheme and the finite volume method.
局部隐式有限元法是在一般有限元法的基础上，兼容了TVD差分格式和有限体积法的某些特点，形成的一种新型算法。
This paper focuses on the use of finite element analysis software, the threshing cylinder axis static finite element analysis process.
为此，着重研究了利用有限元分析软件对脱粒滚筒轴进行有限元静力分析的过程。
The dynamic characteristic of monolayer plate is analyzed by the finite element method, and relevant finite element computation program is compiled.
用有限元方法对单层板结构进行了动态特性分析，并编制了相应的有限元动力计算程序。
Build finite element model of main structure of container crane for finite element analyse.
建立集装箱起重机结构的有限元模型。用于有限元分析。
The finite element analysis software, which was based on the general finite element software package, was developed for numerical simulation of the entire composite cure process.
以通用有限元软件包为基础，开发了能够模拟复合材料整个制造过程中复杂物理化学变化的软件。
Then the solid finite element model and the integrated finite element model of suspenders are built up.
在此基础上，建立钢绞线吊杆地实体单元模型和组合单元模型，进行计算分析。
ANSYS is a general finite element analysis software. And mesh dividing is an important part of finite element analysis with ANSYS.
ANSYS是一个大型通用的有限元分析软件，网格划分是利用ANSYS进行有限元分析的一个重要环节。
The key in finite element analysis on complete pile frame of rotary pile drill-finite element model of pin connection, is researched in depth. A feasible and accurate finite element model is offered.
对旋挖钻机桩架整体有限元分析中的关键件——销轴连接的有限元模型进行了深入研究，并提出了实用而精确的有限元模型。
The structural finite element modelling and the finite element analysis of linear buckling characteristics of the composite by pass duct case of aeroengine are carried out.
对某航空发动机复合材料外涵道机匣构件进行了结构有限元建模与线性屈曲特性的有限元分析。
This paper used the finite element method to compute the temperature field, and combined finite element with analytic solution to develop a calculation of thermal stresses.
本文采用有限元数值分析方法计算多层圆管的温度场，并把解析解与有限元相结合，提出一种求解其热应力的计算方法。
The strength and rigidity of bus body are analyzed, with finite element method and the finite element modeling is validated using the electric measure technique.
用有限元法对半承载式客车车身强度、刚度进行了分析，用电测量技术对有限元模型进行了验证。
A time domain coupling procedure was developed for the finite element (FE) and scaled boundary finite-element (SBFE) methods to analyze dynamic unbounded soil-structure interaction problems.
该文提出了一种有限元(FE)比例边界有限元(SBFE)时域耦合方法以分析结构地基动力相互作用问题。
A time domain coupling procedure was developed for the finite element (FE) and scaled boundary finite-element (SBFE) methods to analyze dynamic unbounded soil-structure interaction problems.
该文提出了一种有限元(FE)比例边界有限元(SBFE)时域耦合方法以分析结构地基动力相互作用问题。
应用推荐