The tube bending forming processes are simulated by explicit finite element code LS-DYNA.
采用显式有限元分析软件LS -DYNA ，对于圆形钢管的弯曲加工过程进行数值模拟。
Therefore, the finite element code can be parallelized and executed on different cluster nodes on which PVM is available.
因此，有限元节点代码可以被并行化、在不同的基于PV M机群结点上运行。
A general nonlinear finite element code has been applied to thermoelastic stress analysis of directionally solidified air cooled turbine blades.
本文利用大型非线性有限元通用程序对定向凝固结晶的气冷叶片进行了热弹性分析。
In this paper, the residual welding stresses in a low carbon steel girth butt welded pipe are calculated with a nonlinear finite element code ADINA.
本文利用ADINA非线性分析有限元程序，对低碳钢管道环焊缝接头焊接残余应力进行计算。
The tube bending forming processes are simulated by explicit finite element code LS-DYNA. The model that tube is bent in a rotary machine is adopted.
采用显式有限元分析软件LS - DY NA，对于圆形钢管的弯曲加工过程进行数值模拟。
The deformation behavior and shear localization in truncated conic specimens of tungsten heavy alloys under impact loading are simulated by the finite element code ABAQUS.
采用有限元计算编码abaqus模拟了钨合金圆台试件在冲击载荷下的变形和剪切局部化行为。
Whole mechanism being treated as a combination of six main parts, three dimensions nonlinear structural simulation is completed by means of dynamic explicit finite element code.
借助动态显式有限元方法，对该六个零件组成的机构整体进行了三维非线性结构数值模拟。
D assembly FE modeling and dynamic elastoplastic analysis are carried out for the obturator structure of a floating gun breech mechanism by using nonlinear finite element code MSC MARC.
利用大型非线性有限元MARC ，对某自动迫击炮浮动炮闩闭气结构，进行了三维装配体有限元建模和动态弹塑性分析，获得了关键闭气构件的应力、塑性应变和变形的动态响应。
Shock initiation behaviors of PBX-9404 impacted by round-nosed steel projectiles were studied numerically by means of adding two kinds of reaction-rate into two-dimensional finite element code DYNA2D.
在二维有限元动力分析程序dyna2d中加入了两种反应速率模型，对圆头钢弹撞击PB X 940 4炸药的冲击起爆行为进行了数值模拟研究。
Thus, nodal code of Finite Element Method can be parallelized and operated in the connecting point of different groups of PVM.
因此，有限元节点代码可以被并行化、并能在基于不同的PV M机群结点上运行。
The microstructure evolution models were implemented into the finite-element code, which allowed the prediction of distributions of grain size in the volume of the forging.
有限元分析方法通过应用微观结构演变的编码实现了预测、仿真锻造过程中晶粒的演变过程。
Comparative analysis of the results come from finite element program calculation and "code of reinforced concrete silo design" is carried out.
对有限元程序计算结果与钢筋混凝土筒仓设计规范方法计算结果进行了对比分析。
The calculation code including manifold method (MM) and finite element method (FEM) is developed to study the non-simultaneous coupling problem of stress-strain and seepage for discontinuous material.
提出了一个用流形元与有限元的变形和渗流非同步耦合的分析方法，用于模拟不连续块体在水压作用下的变形过程。
The general command flow and computer code was compiled to finish the modeling and calculation based on the secondary developing function of the general finite element software.
基于通用有限元软件的二次开发技术，编制了通用的命令流和程序，完成了建模和计算工作。
A finite element model describing the drawing process of the heat-shield panel of automobile engine is established by using the commercial dynamic explicit code LS-DYNA.
使用基于动态显式算法的商业软件LS - DYNA建立了某汽车发动机隔热罩拉延成形的有限元模型。
First, the paper presents the simulation of ring rolling processes by rigid-viscoplastic dynamic finite element method and the H-RING code.
采用刚粘塑性动力有限元模拟环轧动态过程，获得轧制过程中的分布量计算结果。
In the object-oriented finite element program, utilizing the inheritance and polymorphism may establish the object family that has the same key features, and can achieve the reuse of the code.
在面向对象的有限元程序设计中利用类的继承机制和多态性，可以建立具有共同关键特征的对象家族，实现代码的重用；
Object - oriented finite element programming can greatly improve the code modularity and reusability.
面向对象的有限元程序设计可以大大提高程序的模块化和代码的重用性。
Finite element analysis code was used to simulate the effects of laser power and radiation time on the temperature of samples. The simulation results were consistent with the experimental ones.
采用有限元分析软件模拟计算了激光功率和作用时间对清洗过程中温度的影响，计算结果与实验结果规律一致。
The elastic contact problem is analyzed in finite element method (FEM) and is used to the parameters' distribution and contact stress of the joint are obtained on the base of ANSYS code.
基于ANSYS软件平台求解弹性接触问题，获得了榫联接结构接触应力及接触状态量的分布；
By comparing the results of finite element with domestic code, the paper also provides Suggestions for further revising of the code.
将有限元计算结果与国内规范进行了比较，为规范的进一步修订提供了参考建议。
An improved method and system are disclosed for creating on a computer a native operators and test code file for a finite element simulator to model fluid flow in porous media.
公开一种在计算机上产生模拟多孔介质中流体流动的有限元模拟程序的本机运算符和测试代码文件的改进方法和系统。
By the finite element and theory analysis, the design formula of joint shearing capacity is got, which will be good references for design and code of the joint.
通过分析，得出了节点抗剪承载力设计公式，为以后节点设计及相关规范制定提供了参考。
By the finite element and theory analysis, the design formula of joint shearing capacity is got, which will be good references for design and code of the joint.
通过分析，得出了节点抗剪承载力设计公式，为以后节点设计及相关规范制定提供了参考。
应用推荐