The computing result shows that it is very pretty to use this algorithm in the follow finite element calculating.
计算结果表明，使用本文的剖分算法进行后期的有限元计算是十分理想的。
The presented method selects only one cyclic symmetric sector of the structure as the finite element calculating model and establishes the complex constrained eigenvalue equation of the sector.
选取结构的任一个循环对称扇区作为有限元计算模型，建立单个扇区复约束特征值方程；
In finite element simulation of cutting course, correct predigested model not only may improve precision of calculated result, but also can smartly reduce calculating time.
对于切削过程的有限元模拟分析，正确的简化模型不仅可以提高计算结果的精度，并且可以大大的减少计算的时间。
A numerical model calculating displacement of jointed slab on void foundation is established with finite element method.
用有限单元法建立了可考虑接缝和地基脱空的弹性地基板位移计算模型。
By some cases the finite element method has improvement at calculating precision by a long way, and it is a kind of comparatively perfect method.
通过实例计算表明，有限元法在计算精度上有了大大的提高，是一种较为完善的方法。
Compared with the finite element method, the method proposed in this paper requires less memory, less original data to input into computer, and has higher calculating accuracy.
与有限单元法相比，本方法所需的计算机内存少。原始数据输入较简单，算例表明，计算精度高。
In the numerical simulation of relieving residual stress by hammer peening, contact element technique was firstly adopted for establishing the finite model and calculating the hammer peening.
首次在锤击消除焊接应力的数值模拟研究中，采用接触单元技术建立有限元模型模拟计算锤击作用。
The adaptable finite element method is used for calculating the pressure distribution of gas film for face seal.
在有关端面密封气膜压力分布的计算中，采用了对几何结构适应性强的有限元素法。
This article presents the whole process of calculating in finite-element displacement method by MATLAB, and draws bending moment diagram directly.
介绍用MATLAB实现有限元位移法结构计算的全过程，并直接绘出弯矩图。
By using ANSYS as the software of finite element analysis, a model is set up for calculating finite element of pile foundation with lateral load.
运用ANSYS有限元分析软件，建立桩基在侧向荷载作用下的有限元计算模型。
According to wave motion theory, finite element mesh size satisfying the needs of engineering calculating precision is relevant to the upper limit of frequency range of random (response) problems.
根据波动理论，满足随机响应工程计算精度要求的有限元网格大小与待求高频随机响应问题的频率范围上限有关。
In this paper, the finite element model for calculating interference fit stress is formed by using displacement continuous condition and equal value of force condition on the fitting faces.
本文利用互相配合的弹性体配合表面上位移连续条件及力的等值条件建立了计算过盈应力的有限元模型。
In this paper, a group of new models and the formulas for calculating the debonding strength of interface are presented based on the predictions of a mesoscale finite element model.
本文根据作者提出的细观单元有限元研究的结果，建议了一组新的界面本构模型以及界面剥离强度计算公式。
A finite element method is presented for the calculating natural frequency of turbogenerator stator end windings.
本文提出一种计算汽轮发电机定子绕组端部振动固有频率的有限元方法。
The cutter's design method, including parameter design and modeling, stress analysis and calculating, finite element analysis and correcting was introduced in detail.
详细介绍了铣刀的设计方法，包括参数设计与建模、受力分析与计算、有限元分析与校正。
Calculation of brake bottom of drum brake by use finite element method for stress. according to calculating result, studied that stress is distributed over brake bottom.
对汽车鼓式双向自增力式制动器底板进行了有限元计算，在此基础上对制动器底板的应力分布进行了分析研究。
Based on first-order optimization calculating theory, authors established the optimal finite element model of swivel construction of arch bridge adopting hydraulic sync elevation technology.
根据一阶最优化计算理论，构建了采用液压同步提升技术进行转体施工拱桥的优化有限元模型。
The result indicated that the theoretical calculating result of elastically supported continuous beam method is accordant with the result of experimental test and the finite element method.
结果表明，所提出的弹性支承连续梁法计算值，与空间有限元分析理论值及荷载试验测试值吻合得较好。
Finite element analysis method is an effective method for calculating thermal stress, but the temperature parameters for calculation have no uniform standard.
有限元是计算温度应力的很好方法，但是对于计算中所需的温度参数取值并没有统一的标准。
The methods of calculating the first and second kind of stability problems are expatiated using the nonlinear finite element method.
从非线性有限元角度阐述了工程结构第一类稳定及第二类稳定的求解方法。
The stress analytic method of arch dam covers pure arch method, arch beam sharing method, finite element method, calculating method of shell theory and structural model test method.
拱坝的应力分析方法包括纯拱法、拱梁分载法、有限元法、壳体理论计算方法和结构模型试验法。
Analysing and calculating the strength of generator frame and rotor with finite element method.
利用有限元方法分析验算了机座和转子的强度。
After calculating with finite element method and photoelastic-test, it shows that the contact stress distribution is not in keeping with the formulas given by some bearing hand books and textbooks.
通过有限元计算及光弹性实验，结果证明，滚针轴承的接触应力分布与轴承手册和教科书中所给出的公式不符。
By measuring the dynamic strain of the cylinder and calculating the dynamic strain by finite element method, the impact internal pressure of experiment is determined.
通过对带裂纹厚壁筒试件外壁动应变的测定，和用有限元方法计算冲击内压下动应变的变化规律，求出了实验中所加的冲击内压。
A software for simulating and calculating the temperature field in rolling tire has been developed by using the analytical function of nonlinear finite element based on the thermal stability analysis.
在轮胎热学稳态分析的基础上，利用有限元非线性分析功能，开发滚动轮胎温度场有限元模拟计算软件。
With finite element method and compressed flexible array method, this paper establishes a method calculating displacement of joint slab on elastic foundation.
应用有限元压缩柔度矩阵，建立了具有接缝传荷能力多块板的位移计算方法。
A calculating model of finite element method with three-dimensional beam element for subsurface pipeline was established.
建立了埋地输油管道三维梁单元有限元应力应变计算力学模型，并给出了求解方法。
In chapter two, finite element method (FEM) and the process of calculating the distributing parameters of cable resistance, inductance, capacitance and conductance by FEM are presented.
论文第二章介绍了有限元法(FEM)和通过FEM求解电缆电阻、电感、电容、电导分布参数的过程。
In chapter two, finite element method (FEM) and the process of calculating the distributing parameters of cable resistance, inductance, capacitance and conductance by FEM are presented.
论文第二章介绍了有限元法(FEM)和通过FEM求解电缆电阻、电感、电容、电导分布参数的过程。
应用推荐