An automotive CAE software based on automotive theory, finite element analysis and optimization design has been developed to resolve relevant engineering problems.
基于汽车理论、有限元分析和优化设计方法，为解决工程实际问题，开发了汽车CAE软件系统。
This paper carries on movement interference, finite element analysis and optimization design.
对模型进行了运动干涉检查，有限元分析和优化设计。
As an example, Finite element analysis and optimization design are made to a voltage transformer of rating primary voltage 35KV, rating secondary voltage 100V, rating frequency 50HZ.
并以额定一次电压35KV，额定二次电压100V，额定频率50HZ的电压互感器为例，进行了有限元分析计算和优化设计。
The finite element analysis and optimization design of piezoelectric intelligent beam was made based on ANSYS.
运用ANSYS软件进行压电智能梁结构的有限元分析和优化设计。
Optimization results show that this structure optimization method based on nonlinear finite element analysis is effective in joint structure design and the engineering demands are well satisfied.
优化结果显示，采用非线性有限元法和优化方法对卡环连接结构进行设计能够取得满意的效果，设计结果满足工程要求。
At present, modern design methods such as finite element analysis, optimization design, reliability design and etc. are gradually applied in the automotive transmission developing work.
目前，在汽车变速器的开发中，有限元方法、优化设计和可靠性设计等现代设计方法逐步得到应用。
Research was conducted into the optimization design of stay ring structure of the bulb tubular turbine based on the analysis of finite element.
邢伟在有限元分析的基础上，对贯流式水轮机座环结构进行了优化设计研究。
The main function of this program is to establish connection with optimization design and finite element analysis programs.
本程序的主要功能是实现与优化设计、有限元分析程序的联接，是一个较为实用的软件。
The static analysis and structural optimization of the key seal parts and components of vacuum clamp are researched in this thesis using finite element analysis software ANSYS.
本文利用通用化有限元分析软件ANSYS作为分析工具，对真空吸夹具的密封关键部位及密封元件进行了有限元静态分析和优化设计。
Additionally, optimization in structure design of vane MRF damper is completed by using the method of magnetic field finite element analysis, which will effectively enhance performance of damper.
采用磁场有限元分析的方法对叶片式MRF减振器的结构设计进行优化，可以有效提高减振器的性能。
So it will markedly increase the efficiency of finite element analysis and optimization of the tooth profile.
显著地提高了对齿形进行有限元分析和优化的效率。
The finite element analysis (FEA) and the variable density methods were used. The optimization method and process were presented.
采用有限元法与变密度法，给出了优化方法和步骤。
In the design of three-bar truss structure commonly used for engineering, the optimization analysis is carried out for the structure by finite element software ANSYS6.
在对工程上常用的三杆桁架结构的设计中，利用大型有限元分析软件ANSYS6。
There are four post frame molding press and two kinds of structure, the fuselage uses finite element analysis and optimization design of the structure, reasonable structure.
成型压机有四柱和框架二种结构，机身采用有限元件结构分析和优化设计，结构合理。
The main subject of this thesis is about large-calibred valve. By using the finite element software ANSYS, we can do some work such as static analysis, structural optimization and fatigue analysis.
本论文以大口径闸阀阀体为主要研究对象，利用大型有限元软件ANSYS对其进行有限元静力分析、优化计算和疲劳寿命分析。
Optimizing the structure of board with parameter modding of finite element, which proves the feasibility by means of parameter modding function to realize the structure optimization analysis.
采用有限元的参数化建模实现对板结构进行优化分析，证明有限元参数化建模功能实现结构优化分析的可行性，从而为其他复杂结构的优化分析提供了新的方法和依据。
An optimization method for preform die shape in non-isothermal metal forming using plastic finite element method, sensitivity analysis and engineering optimization algorithm is presented.
采用塑性有限元、灵敏度分析和工程优化算法相结合的方法，对非等温成形过程中预锻模具形状进行了优化设计。
Therefore, the optimization of cable bridge design, finite element analysis, safety and reliability of gradually drawed people's attention.
因此索道桥的优化设计、有限元分析、安全性及可靠性逐渐引起人们的重视。
The numerical analysis method, especially the finite element method (FEM) has become the primary tool of numerical analysis and optimization design in geotechnical engineering.
数值分析法，尤其是有限单元法已经成为岩土工程数值分析和优化设计的重要工具。
Based on ANSYS - a large finite element analysis software for calculate and analysis platform, a system developed for the design optimization of turbine stators.
本文以大型有限元分析软件ANSYS为计算分析平台，开发了发动机涡轮静子结构优化设计系统。
This dissertation introduces related developments of finite element analysis and structural optimization at home and abroad.
本文介绍了国内外有限元分析与优化设计的相关研究进展。
The process of adaptive finite element analysis is just the process of continuous mesh optimization.
自适应有限元分析的过程就是网格不断优化改进的过程。
The finite element method is used for calculation so as to provide the basis for the shaft interference fitted analysis of the following connection strength and the optimization design.
与传统方法相比，该方法更为科学和实用，为过盈配合的联结强度分析和优化设计提供了依据。
The finite element method, instead of the usual Arch-Beam Load Distribution method, is applied to the structural analysis in the shape optimization of arch-dam.
采用有限元方法，而不是通常的拱梁负荷分配方法，适用于坝拱的形状优化的结构分析。
The perturbation-based stochastic finite element analysis incorporating structural optimization techniques is employed in the structural robust design problem.
研究了考虑参数随机性的结构静动态特性稳健性优化设计问题的数学模型和数值求解。
The perturbation-based stochastic finite element analysis incorporating structural optimization techniques is employed in the structural robust design problem.
研究了考虑参数随机性的结构静动态特性稳健性优化设计问题的数学模型和数值求解。
应用推荐