In this paper, the spline finite-point method is used to analyze the tube structures, such as framed tube, core, tube in tube and bundle tubes.
本文提出的样条有限点法可用于分析各类高层筒体结构,如框筒、核心筒,筒中筒及筒束结构。
This paper presents a spline finite point method to analyse dynamic stability problem of stiffened shells.
采用样条有限点方法分析加筋壳体的动态稳定性问题。
Then, this paper introduces the math foundation required by ECC, including the addition rule for elliptic curve point defined over finite field.
其次介绍了ECC的数学基础,对有限域上椭圆曲线点的运算规则进行了详细描述。
After finite iterations, the iteration point always gets into the feasible set.
有限步迭代后,迭代点落入可行域。
After finite iterations, the iteration point gets into the feasible set and the master direction is a feasible direction of descent.
有限次迭代后,迭代点进入可行集且主方向是一可行下降方向。
A deformable mesh model was presented for surface reconstruction from a finite 3d point set.
针对有限三维点集的表面重构问题,提出一种可变形网格模型的建模方法。
The inflexion circle and Ball point were obtained under the finite approach state of mechanism movement position.
在机构运动位置的有限接近状态下,得到拐点圆及鲍尔点。
This paper, firstly introduces the elliptic curve in finite field and algebraic law of its point group, gives the order of the group.
该文首先介绍有限域上定义的椭圆曲线及点群运算规则,给出椭圆曲线点群的阶。
From the outside observer's point of view, the descent appears to take an infinite amount of time, even though only a finite time passes for the travelers themselves.
从外部观察者的角度来看,旅人坠入黑洞得花上无限久,尽管旅人自己会觉得只过了一段有限的时间而已。
Several cases are presented for point contacts including single asperity, wavy surface and real engineering rough surfaces, and also for finite line contact.
计算实例模拟了点接触单峰表面,正弦表面和真实粗糙表面的弹性接触以及有限长滚子线接触等接触问题。
The finite difference method (FDM) is used in the numerical calculation. Fielddistribution at particular time and field at one point as a function of time are displayed.
数值计算采用了有限差分法,可算出某时刻厚板边缘散射场的分布和某点声场随时间的变化。
The paper analyses the bending fatigue strength of a crankshaft single crank from the view point of reliability design by means of 3d finite element method.
本文运用三维有限元法,从零件可靠性设计这个角度分析了曲轴单拐的弯曲疲劳强度。
At present, two main stochastic models, point-source model and finite-fault model, are adopted to simulate ground motions.
随机法模拟地震动目前主要采用点源模型和有限断层模型两种方法。
This paper set out from the high order shear deformation theory at first, and utilize the spline finite point method to set up a new dynamic model of piezoelectric intellectual plate.
本文首先从高阶剪切变形理论出发,利用样条有限点法,建立了压电智能层合板新的动力模型;
A finite point matrix method based on the cosine splines is presented by utilizing the conception of the nodal influence domain in this paper.
应用节点影响域的概念,提出了基于余弦样条函数的有限点阵方法。
Based on this point, the mechanics and finite element models for casing stress calculation are established.
在考虑这一特点的基础上,建立了套管应力计算的力学及有限元模型。
In this paper we suggesst a finite element method for singular two point boundary value problems with singular solution by introducing singular basis with local support.
采用具有小支集的奇异基函数的有限元方法求解奇异两点边值问题的奇异解。
Takada's simplified formula calculates the length of the start-bending point to the fault according to Kennedy's method and the soil constraint is not considered in his finite element model.
Takada简化计算公式采用Kennedy方法计算弯曲点到断层的距离,其有限元模型中并没有考虑管周围土作用。
Presents numerical simulation of multi point forming of sheet using a finite element polycrystal model.
采用有限元多晶体模型对板材多点成形过程进行了数值模拟研究。
According to point coordinates on the tooth surface calculated theoretically and using FORTRAN, this paper compiles the programs and builds 3d finite element model of the helical gear.
运用FORTRAN语言,并根据理论计算得到齿面点坐标,编制程序,建立斜齿轮三维有限元分析模型。
The boundary point method has been applied to solve the problem of dam foundation seepage, and its results are compared with the results from finite element method and fissure network method.
采用边界点法分析坝基渗流问题,编制了计算程序并与有限单元法和裂隙网络法的计算结果比较。
This paper presents the finite element method for solving the direct-current field of point source on a 2-d anisotropic geoelectric section.
本文给出点源二维各向导性地电断面的直流电场有限元解法。
It is a difficult point to teach the students solving the wave equation on finite interval by the reflection law of the wave.
用波的反射原理求解有限区间上的波动方程是数学物理方程中的基本内容,也是教学中的难点内容。
The condition for finite solution of homing motion can be obtained from the series form solution at singular point.
寻的运动在相遇点即奇异点展成级数可得解为有界的条件。
Finally, based on the studies on the key technologies of the system, a finite element analysis system for cable-strut structure of point-supported curtain walls was developed.
最后,基于以上关键技术的研究,开发了点支式幕墙索杆结构有限元分析系统。
The eight-point finite element is used for the discretization in the space system. The finite element model is given, facilitating to sensitivity analysis for non-linear direct and inverse problems.
采用八节点的等参单元在空间上进行离散,建立了便于敏度分析的非线性正演和反演的有限元模型,可直接求导进行敏度分析。
In the two-dimensional interpretation, we adopt the point source finite-element method and the reciprocity principle which can lighten the calculation burden.
二维解释是采用点源有限单元法,为减少计算量,利用了互换原理。
The vibration and sound radiation from a finite stiffened double cylindrical shell driven by a point force on the shell surface in the radial direction are studied in this paper.
分析了壳体的固有模态、激励力和声辐射三者之间的关系,这为用主动控制方法降低有限长加筋双层圆柱壳的振动噪声,提供了理论依据。
For making the theoretic results close to the fact, two methods used to calculate the internal force of beams with finite length bearing several point loads and on soil foundation were compared.
为了使理论结果能尽可能准确地反应实际情况,就土质地基上受多个集中力作用的有限长梁的内力计算方法进行了对比分析。
For making the theoretic results close to the fact, two methods used to calculate the internal force of beams with finite length bearing several point loads and on soil foundation were compared.
为了使理论结果能尽可能准确地反应实际情况,就土质地基上受多个集中力作用的有限长梁的内力计算方法进行了对比分析。
应用推荐