SEM images indicate that there are many small bright spots on fiber surface.
以上均说明此方法对纤维表面改性效果明显。
Plasma technology is an effective method to improve textile fiber surface properties.
等离子体技术是一种改善纺织纤维表面性能的有效方法。
The fiber surface and interface of CFRMC Nylon were also investigated by XPS and SEM.
并用X射线光电子能谱（XPS）和扫描电子显微镜（SEM）对纤维表面和CFRMC尼龙界面进行了研究。
The fiber surface morphology analysed by AFM also approved the result of XPS analysis.
利用AF M对纤维表面形貌分析的结果与XPS结论一致。
The textile fiber surface causes its lining because to wash not easily smoothly causes the shrinkage distortion.
纤维表面光滑使其面料不容易因洗涤而引起缩水变形。
The invention discloses a carbon fiber surface modification method, and relates to a carbon fiber modification method.
一种碳纤维表面改性方法，它涉及一种碳纤维改性方法。
The influence of carbon fiber surface grafting polymerization on the interface of polymer composite is also discussed.
探讨了接枝聚合物层对复合材料界面的影响。
As result, quantitative relations between the fractal dimension of cotton fiber surface and its sugar content can be made.
结果表明，棉纤维表面分维数与含糖量间存在定量关系。
A quasi-distributed optical fiber surface plasmon resonance (SPR) sensor based on wavelength division multiplexing is studied.
研究了一种基于波分复用原理的准分布式光纤表面等离子体波传感器。
The changes of fiber surface wettability and surface groups were determined by dynamic wettability test equipment and IR spectrum.
首次采用浸润性测试和IR测试分析等离子体处理前后纤维浸润性和表面官能团的变化。
A device for the chemical treatment of fiber surface was designed and installed, with which UHMPE fibers were treated continuously.
研制了用于UHMPE纤维表面处理的连续化学处理装置。将经过处理的UHMPE纤维与环氧树脂体系制备成复合材料。
The micro morphology of fiber surface was analyzed by SEM, and the active functional group on the fiber's surface was analyzed by XPS.
利用扫描电镜和电子能谱，进行了纤维表面形貌分析及表面活性官能团分析。
The result shows that, the concentrated nitric acid and mix acid have a obvious effect to the chemical modification of carbon fiber surface.
结果表明：用浓硝酸或混酸对碳纤维表面改性的效果是显著。
The results clearly show that the saturated moisture content of the UHMWPE3D/PMMA composites exhibited reduction for fiber surface treatment.
纤维表面处理改善了界面结合，使得UHMWPE3D/PMMA复合材料平衡吸湿量降低；
There were many ways to achieve metallization of quartz optical fiber surface, and electroless plating was obviously superior to other methods.
石英光纤表面金属化有多种方法可以实现，化学镀的方法明显优于其他方法。
The research results showed that the deposition technique can add the absorbed amount of polyelectrolyte and cause potential changes in fiber surface.
研究结果表明：交替沉积技术可以增加聚合电解质在纤维表面的吸附量，并引起纤维表面电位的变化。
The effect of stacking parameters and fiber surface treatment on the longitudinal tensile properties of F-12/CF hybrid epoxy composites had been studied.
研究了铺层参数及纤维表面处理对芳纶纤维、碳纤维混杂增强环氧复合材料（简称混杂复合材料）纵向拉伸性能的影响。
This species is introduced from abroad for, greenhouse, hardy, fast-growing resistant, fragrance, flavor, taste good, big leaf fiber surface, double oil, aging.
该品种是由国外引进，适合保护地、露地栽培，耐寒，速生，极耐抽苔，味香浓，叶片大，口感好，双油面，纤维少，不易老化。
Optical fiber surface plasmon resonance (SPR) sensors can be designed based on SPR technique, which have many advantages compared with traditional prism SPR sensors.
利用光纤表面等离子体共振(SPR)技术设计了光纤表面等离子体波传感器。该传感器与传统棱镜spr传感器相比有很多优点。
The surface orientation index reduces by 1.5%, and the microcrystalline dimension also decreases, and the active carbon atoms of carbon fiber surface increase by 78%.
表面取向指数减小了1.5%，表面微晶尺寸减小，表面活性碳原子数增加了78%。
A certain degree of free fibrillar structure was observed on the fiber surface due to the sheath structure of the fiber subjected to the greater drawing and orientation.
纺丝过程中纤维皮层结构受到更大的拉伸取向作用，并在纤维表面出现一定游离原纤化结构。
Applying the fractal mathematics model, we can estimate the dimension of various kinds of cotton fiber surface, then, make the sample consulting the quantitative relation.
而采用小波算法建立棉纤维表面分形数学模型，计算各种棉样的表面分维数，利用其与原棉含糖量间存在的定量关系，制成样本。
As a new kind of SPR, optical fiber surface plasmon resonance sensors have an outstanding advantage to realize real-time and long-distance measurement in many application fields.
光纤spr传感器是一种新型传感器，可在多个领域实现远距离实时在线监测。
As a result, it demonstrated that atmospheric pressure plasma jet technology can increase the roughness of fiber surface and dye depth, and improve dyeing property of Nylon 6 fiber,...
试验结果表明，常压等离子射流处理可增加纤维表面的粗糙度，增加纤维染色深度，提高尼龙6纤维的染色性能，且对纤维强度无影响。
The fiber surface sound cone of the invention is prepared from a composite material and solves the problem that the cone and concave sound cone occupy too much space of the loudspeaker.
本发明的纤维平面音盆，采用复合型材料做成，解决锥体与凹面音盆占得过且很大扬声器空间的问题。
The paper strength index of masson pine CTMP was studied after alkaline sodium sulfite treatment, the pulp fiber surface properties of the masson pine CTMP were analyzed with XPS and AFM.
研究了经碱性亚钠法处理的马尾松化学预热机械浆(马尾松ctmp)纸页强度指标并利用XPS和AF M技术分析了纸浆纤维的表面性质。
Cashmere fiber surface inclination of the small scales, scales clinging to hair shaft, arranged more structured, fiber surface is very slippery, woven into a sweater with a slippery feel.
羊绒纤维表面鳞片张角小，鳞片紧抱着毛干，排列比较规整，纤维表面非常滑润，织成的毛衫具有滑的感觉。
Gas-phase oxidation treatment resulted in distrihution of some micro-pores and ditches at the carbon fiber surface and led to stress concentration therefore, the composite strength was not high.
结果表明：空气氧化处理碳纤维表面形成微孔和刻蚀沟槽，容易形成应力集中，复合材料的强度不高；
Gas-phase oxidation treatment resulted in distrihution of some micro-pores and ditches at the carbon fiber surface and led to stress concentration therefore, the composite strength was not high.
结果表明：空气氧化处理碳纤维表面形成微孔和刻蚀沟槽，容易形成应力集中，复合材料的强度不高；
应用推荐