The paper is related to the optical fiber probe, which is the key part of NSOM.
本文主要围绕近场光学显微镜关键部件—光纤探针的研制改进展开。
The second section is studies on sulfur dioxide porous plastic optical fiber probe.
第二节为二氧化硫多孔塑料光纤传感探头的研究。
It consists of light emitting diode, an optical fiber probe, and two photodetectors.
该光纤式振动计由发光二极管、光纤探头和两个光子探测器组成。
The bend optical fiber probe is used in developed NSOM system and the perfect images are obtained.
利用该方法研制的成品弯曲光纤探针应用于光子扫描隧道显微镜系统，得到了比较理想的样品图像。
As a method of acquisition sensor, optical fiber probe has many advantages, such as noncontact, high accuracy.
光纤探针作为三维形貌测量技术的传感器，具有非接触、高精度等优点。
This paper presented a measuring system that can test skins color and reflecting spectra with optic fiber probe.
本文介绍了光纤探头式皮肤反射光谱分析和颜色检测系统。
An optical fiber probe is used to study the cross-section of oil-gas-water three-phase slug flow in vertical tubes.
利用光纤探针试验研究垂直上升管内气、水、油三相弹状流截面相份额的规律。
This system consists of a light monochromatic system, an optical fiber probe, a CCD (Charge Coupled Device) and a computer.
该系统由微型光谱仪、光纤探头、CCD探测器和计算机组成。
It is emphasized on the theory of dynamic fluorescence quenching and the basis principle of porous plastic optical fiber probe.
着重介绍了荧光产生和猝灭的原理及多孔塑料光纤探头的原理。
The mechanism and process of fabricating fiber probe by combining the static and dynamical chemical etching methods is analyzed.
理论上分析了静动结合的化学腐蚀法制备探针的具体机理及过程。
The central one of the fiber probe is used for transmitting laser beam, the others having same spaces to the center one are used for receiving scattered signal.
在装置中间，其中一根光纤用于传输入射激光，周围多根光纤与中心光纤等间隔，用于接收血液中的散射光。
The evanescent wave-based optical fiber biosensor USES the evanescent wave which is produced when light propagates in the fiber probe to excite the fluorescence signal.
光纤倏逝波生物传感器系统中，利用激光在光纤探针中传播时产生的倏逝波来激发荧光物质，产生荧光信号。
According to the hydraulic transmission principle, a device for fabricating large cone Angle near-field optical fiber probe by means of dynamic chemical etching is developed.
基于液压传递原理，设计出一种用动态化学腐蚀法制备大锥角近场光纤探针的装置。
The theory of vibration measurement by interference with a multimode single optic fiber probe and an experimental arrangement, as well as the experimental results are presented.
本文介绍了单根多模先纤探头的干涉测振实验装置，测量原理以及实探结果。
Atomic absorption spectrometry (AAS), scanning electron microscopy (SEM), and energy dispersive X-ray spectrometry (EDXS) are carried out to characterize the deposition on fiber probe.
通过使用原子吸收光谱仪，扫描显微镜和能量色散X射线谱仪对覆膜光纤探针进行表征。
Aiming at solving the detective problem of laser-induced plasma shock-wave underwater in small domain, a method of single mode quartz fiber probe has been studied on experiment preliminarily.
针对小范围内水下激光爆炸所产生的等离子体冲击波检测问题，对单模石英光纤探针探测方法进行了初步实验研究。
NASA just announced five science experiments that will fly on the scorching probe, which will be protected by a carbon-fiber heat shield that can withstand temperatures of 2,500 degrees F.
NASA已经宣布将在这个"超级火热"的航空器中进行5项科学实验。 航空器将得到表面的碳纤维材料层的保护,这个保护层能够忍受华氏2500度的高温。
NASA just announced five science experiments that will fly on the scorching probe, which will be protected by a carbon-fiber heat shield that can withstand temperatures of 2, 500 degrees f.
NASA已经宣布将在这个“超级火热”的航空器中进行5项科学实验。航空器将得到表面的碳纤维材料层的保护，这个保护层能够忍受华氏2500度的高温。
Objective: to probe into application and nursing coordination of glass fiber stake in repair of post crown for patients.
探讨玻璃纤维桩在桩冠修复中的应用及护理配合。
A novel reflective fiber optic microphone was introduced. It USES a reflective fiber optic sensing probe to realize the outside modulation of sound to light.
一种新型的反射式光纤麦克风，它利用反射式光纤传感探头实现声音对光的外调制。
The test system consists of optical fiber temperature probe, optical fiber modulator and test-control software.
测试系统含光纤温度探头、光纤调理器及其测控软件。
First, we probe into the crafts of rotor spinning and ring spinning and combining the characteristic of the fiber to spin.
结合天然彩棉纤维本身的特点，在纺纱过程中分别运用气流纺纱和传统的环锭纺技术进行了纺纱工艺的探索。
The ultrasound transducer, incident laser fiber and probe fiber can be integrated into a compounded detector, which can be implemented in clinic application.
该系统可以进一步改造，将激光入射光纤、超声和光纤接收器集成为一个复合探头，便于临床应用。
An advanced measuring system with tri fiber optical probe has been developed to measure two dimensional bubble velocity.
开发了一套新型的三探头单纤光导探针测量系统，用于测量二维气泡速度。
The use of push-pull probe can lower the demand of laser linewidth in optical fiber sensors, so we can use normal laser in optical fiber sensors and spread practicability of the system.
而采用推挽式探头设计结构，由于两臂等长可以降低传感器对激光器线宽的要求，采用普通的激光光源就可以满足要求，拓展了系统的实用性。
Morphology of functional polysiloxane film and their orientation on fiber have been observed and studied by an atomic force probe microscope (AFM) and other instruments.
用原子力探针扫描电镜AFM等仪器对聚硅氧烷的膜形态及其排列方式作研究。
Cellulosic fiber fabrics were modified with modifier AM to probe the dyeing properties of the modified fabrics with natural vegetable dyes.
采用改性剂am对纤维素纤维织物进行改性，探讨了改性织物对天然植物染料的染色性能。
Basing on the experiment results, analyze the toughening effect of deformed steel fiber and probe into the bond mechanism of it.
根据试验结果分析异形钢纤维增韧效应，探讨异形钢纤维的增韧机理。
In chapter two, the principle, material and the course of preparation of porous plastic fiber optical probe were dissertated and the influence factors of the preparation were throughly discussed.
第二章介绍了多孔塑料光纤传感探头的制备原理、制备过程、制备原料，并详细探讨了多孔塑料光纤传感探头制备过程的影响因素。
The bubble size and its distribution has been studied in three-phase circulating fluidized beds by using the newly developed fiber optic probe system systematically.
开发了一种新型的光纤探头多相流气泡测试系统，可用于气-液两相和气-液-固三相体系中气泡参数的测定。
应用推荐