The difference: yam net net into the glass yarn fabric and polyester fiber coating.
纱网的区别：纱网分为玻璃纤维网和聚脂涂层化纤网。
The major factors to affect curing degree of optical fiber coating at high drawing speed based on the existing drawing tower.
主要讲述了拉丝塔提高光纤拉丝速度过程中，影响光纤表面涂层固化度的几个因素。
Reinforcing fiber and fiber coating play an important role in properties of continuous fiber reinforced ceramic composite (CFCC).
补强纤维对连续纤维补强陶瓷复合材料(CFCC)的性能起着至关重要的作用。
The optimum sampling conditions were investigated, including the polarity of fiber coating, sample amount, equilibrium temperature and time etc.
探讨了最佳的取样条件（包括不同极性涂层的纤维头、样品量、平衡温度、平衡时间等）。
The paper filter stick is made by a cigarette holder forming machine by adopting the paper made after the acetate fiber coating as the raw material.
所述的纸质滤棒是采用上述经醋酸纤维涂层后制造的纸为原料用嘴棒成型机制造而成。
In addition, compared with colloid silica which has high gloss property for inkjet coatings, the micro-fiber coating layer displays the better quality of excellent opacity, higher.
与高光泽胶体二氧化硅相比，微细纤维涂料涂层表现出非常好的不透明度、亮度和光泽度。
By the glass fiber yarn woven into a tube at high temperature treatment, silicone resin coating to form.
是由玻璃纤维纱编织成管后经高温处理，涂以有机硅树脂而成。
The UV curable coating of fiber ribbon was prepared by blending bisphenol A epoxy acrylate(EA) and polyurethane acrylate(PUA)and adding reactive diluent, photoinitiator and pigment.
采用双酚A环氧丙烯酸酯（EA）和聚氨酯丙烯酸酯（PUA）共混，加入活性稀释剂、光引发剂、颜料等制备了紫外光固化光纤涂料。
The influence of the second coating on the fiber Bragg Grating(FBG) temperature sensitivity is researched.
系统研究了二次涂敷封装方案对光纤光栅（FBG）温度特性的影响。
This paper discusses mainly the coating technics of polysulfone hollow fiber membrane for gas separation by the effect of some surface active agents.
主要探讨了一些表面活性剂对气体分离用聚砜中空纤维膜表面涂敷上的作用。
The key process in manufacturing loose tube type fiber optic cable is secondary coating for fiber or fiber ribbon.
束管式光缆制造中最关键的工序是光纤和光纤带的二次套塑。
Effects of some factors such as coating density, fiber variety, binder and plasticizer on thermal conductivity and installation performance of coating for tundish were researched.
研究了涂料密度、纤维种类、结合剂及增塑剂等因素对涂料导热性能和施工性能的影响。
The effect of die design on coating concentricity of optical fiber at high drawing speed is investigated.
研究了在高速拉丝条件下涂覆模具的设计对光纤涂层同心度的影响。
Addition of electrical conductive fiber to the radar absorbing coating of carbonyl iron powder (CIP) has been studied.
本文研究了在羰基铁粉(CIP)吸波涂层中添加导电纤维对涂层的电磁参数和反射率的影响规律。
It is determined through experimental analysis that the resistance of an optical fiber is taken interim as standard of air sealed carbon coating optical fiber for 2 % -strain screening.
通过实验分析确立了把光纤电阻作为衡量气密性碳涂覆光纤通过2%应变筛选的过渡标准。
The qualities and applications in plastics, rubber, fiber and coating of nano-silica are summarized.
综述了纳米二氧化硅的性质及其在塑料、橡胶、纤维、涂料等方面的应用。
A simple and feasible installation for coating the fiber gratings is designed.
设计了一种简易可行的光纤光栅涂覆装置。
This installation is compact and flexible low-cost, especially fits for coating longer fiber gratings once and for all. And the thickness of the coat is adjustable.
该装置简单灵活，成本较低，尤其适合于长度较长的光纤光栅的一次性涂覆，涂层厚度灵活可调。
The result shows that adding fiber can greatly reduce the bulk density of coating. The organic expanding agent can also lower bulk density of coating and linear change in drying process.
试验结果表明，加入纤维能使镁质中间包涂料的体积密度大幅度地降低，有机发泡剂的加入能够进一步降低涂料的体积密度及干燥收缩；
The application of nano SiO 2 in polymer such as plastics, rubber, fiber, coating, and so on as well as its modifying mechanism for polymer materials were reviewed.
介绍了纳米二氧化硅对高分子材料的改性机理及其在塑料、橡胶、纤维、涂料、粘合剂和密封胶等高分子领域中最新研究应用情况。
The fiber paper are used as the basic materials of PVDC latex coating packaging materials, with the same packaging property as painting PVDC on other plastics films.
用纤维纸作p VD C胶乳涂覆型包装材料的基材，具有与以塑料为基材的涂覆膜相同的包装性能。
By coating the blend of poly (vinyl alcohol) and chitosan on the inner surface of poly (acrylonitrile) hollow fiber ultrafiltration membrane, the composite membrane for pervaporation was obtained.
本文将聚乙烯醇和壳聚糖混合物涂到聚丙烯腈中空纤维内表面制备用于渗透汽化过程的中空纤维复合膜。
The carbon fiber is the main reinforcer for titanium diboride coating material, and greatly influence the properties of titanium diboride coating cathode.
碳纤维是硼化钛涂层材料的增强剂之一，对硼化钛阴极涂层的性能影响很大。
As for the performance of UVcured optical fiber buffer coating, the main concerns are the curing speed, strength, stripping force and additional loss of the buffer layer.
紫外固化光纤缓冲层涂料性能，主要考虑的是缓冲层涂料的光固化速度、缓冲层的强度、缓冲层的剥离力及缓冲层的附加损耗等性能。
This paper concerns the numerical methods and applications of a micromechanical model with coating effects for fiber-reinforced metal matrix composites.
本文论述考虑涂层效应的纤维增强金属基复合材料的热机械加载模型的数值解法和工程应用实例。
In this paper a micromechanical model of fiber-reinforced metal matrix composites is established with considering the coating effects.
本文着重论述考虑涂层效应的纤维增强金属基复合材料的热机械加载细观力学模型。
This product is high e-glass fiber through international advanced knitting process, the net shape surface coating processing and made of semi-rigid products.
该产品是以高强无碱玻璃纤维通过国际先进的经编工艺制成网状基材，经表面涂覆处理而制成的半刚性制品。
SiO2 Coating is steady and it has a better protectivity towards carbon fiber . Different coating results in different distribution of fiber in matrix.
二氧化硅涂层稳定，对纤维有较好的保护作用，涂层不同，形成了不同的纤维分布状态。
It is also present the application example of the GFT-1 high-performance anti-corrosive coating and the glass fiber reinforced plastic made by the coating in the sewage treatment construction.
介绍了GFT—1高性能防腐蚀涂料和由此制成的鳞片衬里在污水处理工程中的应用范例。
Optical fiber carries excitation light produced by the blue LED to the thin-film coating at the probe tip.
光纤把LED产生的励磁光传输给探测器尖端的薄膜涂层。
应用推荐