Rms algorithm and FFT algorithm have been achieved.
实现了均方根算法和FFT算法。
It was displayed or printed after being processed by the FFT algorithm.
测量温度值经FFT处理后送显示或打印。
In calculation, FFT algorithm is used to develop the speed of computation.
计算中采用了FFT算法,提高了计算速度。
This design can use FFT algorithm to estimate power quality and expand reactive compensation in addition.
本设计可以采用FFT算法来判断电能质量,可外加扩展无功补偿。
The result of research shows that the best architecture of the parallel FFT algorithm is hypercube architecture.
经研究表明,并行fft算法的最佳体系结构为超立方体。
On the basis of traditional serial FFT algorithms, a parallel FFT algorithm based on multi-threading is put forward.
在传统的串行FFT算法基础上提出了一种基于多线程技术的并行FFT算法。
Harmonic analysis usually adopts FFT algorithm, the 280 Sample points need interpolation management, which make FFT faster.
谐波分析通常采用FFT算法,为了加快FFT的运算速度,需要对280个采样点进行插值处理。
Comparing with the ring or the mesh architecture, the parallel FFT algorithm on the hypercube is found to have better performances.
比较环和网状结构,超立方体上的并行fft算法具有更好的性能。
Aiming at the issues, the paper presents two methods, the multi-channel non-gapped sampling technique on-line and recursive FFT algorithm.
针对上述问题,本文提出了两种方法:在线多通道无缝采样分析技术和递推fft算法。
FFT algorithm is the most used algorithm for digital signal processing, and a FFT processor is one of the important means for FFT computation.
FFT算法是数字信号处理最常用算法,使用FFT处理器是进行FFT运算的重要手段之一。
Through simple transforms of FFT algorithm, the amending algorithm can reduce satisfactorily the leakage error, and obtain accurate analysis results.
该算法通过对FFT算法做简单变换,减小了频谱泄漏误差,降低了谐波之间的相互干扰。
The decimation in time (DIT) radix-2 FFT algorithm is analyzed in details with input in normal order and output in bit-reversed order by the binary method.
运用二进制方法对按时间抽取顺序输入倒序输出的基2FFT算法进行了较为详细的分析和论证。
Finally a3780-point FFT algorithm is introduced in brief, whose capacity complexity and computation complexity are close to the conventional4096-point FFT.
最后简要介绍了实现3780点快速傅立叶变换(FFT)的算法。其计算复杂度和容量复杂度都与标准的4096点FFT算法相当。
A way of digital phase detector applied to the laser phase distance measurement system is introduced in this paper, which is based on DSPs and FFT algorithm.
本文介绍了应用于激光相位式测距中的一种数字相位计的实现方法,该方法是基于DSP器件运用FFT算法完成的。
This FFT algorithm can be used with arbitrary integer dimensions. For 1-dimension, the algorithm will be simplified as the well-known DIF vector radix 2 FFT.
该FFT算法适合于维数为任意整数的情况,当维数为1时,算法退化为著名的频域抽取向量基2 FFT算法。
The half-wave symmetric FFT algorithm can omit the even harmonics in its calculation, according to only have odd harmonics in the half-wave symmetric signals.
该算法对于只含奇次谐波分量的一类半波对称波形,省去了偶次谐波分量的计算。
The comparison results show that, compared with multi-dimensional separable FFT, the DIF multi-dimensional vector radix FFT algorithm has lower calculation load.
计算量比较结果显示,频域抽取多维向量基FFT算法比多维分离式FFT算法计算量低。
In addition, the original multi_atoms rapid matching pursuit (MAMP) decomposition algorithm is improved in combination with mp decomposition based on FFT algorithm.
此外,结合FFT的MP分解算法,对原有的多原子匹配追踪(MAMP)分解算法进行改进。
HITDSO package is provided in this paper, it can get the above specifications and display the graphics and values by using the acquiring data and efficient FFT algorithm.
本文提供的HITDSO软件包,直接根据DSO采集的数据,利用FFT的高效算法,得到DSO的上述几项性能指标,并进行图形及数值显示。
To reduce those errors, an interpolated FFT algorithm for dielectric loss Angle measurement based on triangular self-convolution window (TSCW) is presented in this paper.
为减小这类误差,本文提出了一种基于三角自卷积窗的插值FFT介损角测量方法。
According to different situations the FFT algorithm is applied to. three types of fix-point, floating-point and block-floating-point complex FFT algorithms are presented.
根据不同的应用场合,分别实现了定点、浮点和块浮点三种数据格式的复数FFT算法。
This paper discusses the parallel FFT algorithm on the hypercube architecture. Based on the analysis of the communication complexity, the speedup of the algorithm is derived.
本文讨论超立方体结构上的并行fft算法,着重分析算法的通信复杂性,并在此基础上导出算法的加速比。
A new method for measuring the total harmonic distortion of ultra low frequency signa1 by means of FFT algorithm is presented and the measuring error is analysed in this paper.
本文提出了采用FFT算法来测量超低频失真度的方法,解决了超低频失真度的测量问题。
This paper studies the parallelism of the different stages of decimation in time radix 2 FFT algorithm, designs the butterfly and scramble kernels and implements 2d FFT on GPU.
本文研究了基2的时域抽取快速傅立叶变换各阶段的并行性,并据此设计了相应的蝶形和倒序运算核,在GPU上实现了二维fft运算。
To solve this problem, a new method of frequency offset estimation is proposed. This method adopts modulated data elimination technique and the segmental correlation FFT algorithm.
为了解决这个问题,提出了一种新的频率估计算法,采用扩频调制信息消除策略和分段相关FFT频谱分析技术实现频偏精确估计。
After deeply studied in the fast Fourier transform (FFT) method, this paper presents an improved FFT algorithm considering the half-wave symmetric characteristic of power system signals.
在深入分析快速傅里叶变换(FFT)方法的基础上,针对一类电网信号具有半波对称性的特点,提出了一种改进的FFT算法。
DFT method can be fast implemented on DSP platform by the use of FFT algorithm, while the method of cyclic correlation has better noise immunity performance and high estimation accuracy.
离散傅立叶变换方法能够在DSP平台上通过FFT快速实现,而循环相关方法则具有很高的频率估计精度和很好的抗噪性能。
According to the basic principles of FFT algorithm, this paper analyzes each instance of start time values sampled in harmonic measuring and the data obtained from anytime start sampling.
根据FFT算法的基本原理,对谐波检测中采样起始时刻取不同值的各种情况进行分析,并对任意时刻开始采样得到起始点的数据情况进行分析。
Aimed at the less detection precision and the more errors arising from the common electric parameter detecting method, this paper proposes a synchronous sampling method and radix 2 FFT algorithm.
针对普通电参数检测方法检测精度低、误差大的缺点,提出了一种同步采样法和基2FFT算法。
Under the conditions of meeting the real time imaging and given resolution, the algorithmic speed required by the system is analyzed. And an improved FFT algorithm and its implementation are given.
在满足实时成像和一定分辨率的条件下,分析了系统对运算速度的要求,提出了一种改进的快速傅里叶算法及其实现方法。
应用推荐