A reasonable spurious parameter of artificial boundary is also proposed, which lays down the base for FEM numerical simulation.
提出了合理的人工边界反射系数公式，为有限元模型提供了理论基础。
Some electromagnetic parameters in soft contact continuous casting mold of billet were analyzed through 3-d FEM numerical simulation method.
通过有限元法三维数值模拟，对方坯连铸软接触结晶器系统中的电磁参数进行了计算。
The magnetic forces and dynamic deformation analyses for tube-compression by electromagnetic forming are performed by coupled fields FEM numerical simulation.
对管件电磁缩径的磁场力和动态变形进行了耦合场FEM数值模拟。
The initiation time of crack is measured by strain gauge on the sample. The fracture toughness of the composite material is determined by FEM numerical simulation.
使用应变片方法确定了裂纹的起裂时间，结合有限元数值模拟得到了裂纹的起裂韧性；
Based on the field loading tests and FEM numerical simulation analysis, the paper probes into the potential bearing capacity of large diameter and super-long bored-cast-place piles.
基于入和没入硬层时有限元数值模拟对比分析和持力层不同时同场地现场对比试验资料分析，对大直径超长灌注桩的承载潜力问题进行了探讨。
A 3d FEM numerical simulation of electromagnetic field in the crystallizer with different outer sleeves materials for al melt in low-frequent electromagnetic casting were conducted.
在结晶器外套材料的不同情况下，对低频电磁铸造铝合金过程的电磁场进行了三维有限元数值模拟。
With the help of FEM numerical simulation method, the performance of cooling towers in terms of stress, displacement and local elastic stability due to aerodynamic loads are examined.
根据模型中状态反馈模块和时滞反馈模块的不变性特点，通过构造合适的迭代映射，研究了饱和区域内平衡点的存在性、个数以及局部渐近稳定性。
Based on a former constitutive model, the calculation formulas for rigid-(visco) plasticity FEM were worked out, and an overview on the development of FEM numerical simulation was made.
论述了刚（粘）塑性有限元法的主要思想和处理方法。基于前期的本构模型，得出了刚（粘）塑性有限元法的求解列式。并对有限元数值模拟的发展前景作了预测。
In this paper, the geometric nonlinearity problem is analyzed based on the second beam theory, and a theoretical solution is proposed, whose accuracy is verified by FEM numerical simulation.
本文基于二次梁理论给出了该几何非线性问题的理论解，其正确性通过有限元的数值计算结果得到验证。
Reliability calculation based on response surface FEM method utilizes the FEM numerical simulation to solve the reliability problems in which the analytical performance function can not be given.
响应面有限元的可靠度计算是采用有限元数值模拟来解决功能函数不能明确表示的结构可靠度计算问题的一类方法，对于大型复杂结构的可靠度分析有重要的意义。
Numerical analyses on underground cavern excavation have shown the effectiveness of the procedure and the advantages of adaptive multi-grid FEM in the simulation of excavation process.
通过算例说明了方法的有效性以及自适应多重网格有限元用于开挖施工过程模拟分析的优越性。
A simulation study was made of the centrifugal stresses exerted on a grinding wheel by means of a visual numerical simulation technique, using the FEM software ANSYS.
应用可视化数值模拟方法，借助于大型通用有限元软件ANSYS建立砂轮回转的数学模型，对离心应力进行了仿真研究。
For the applications of the metal stamping numerical simulation system in the rolling stock manufacture, the forming parameters are all optimized in finite element method (FEM).
分析了冲压成形数值仿真系统在铁路车辆制造中的应用，指出了用显式有限元分析的方法，可以对冲压成形中各方面的参数进行优化处理。
This paper carries out analysis on the numerical values in the construction of soft and weak rock tunnel by means of nonlinear FEM numerical value simulation method.
采用非线性有限元数值模拟的方法，对软弱围岩隧道施工进行了数值分析。
Among the numerical simulation methods, the finite element method (FEM) is widely to solve the electric field with complex structure and multi-dielectric medium with high precision.
在常用数值求解方法中，有限元法以其通用性强，适用于结构复杂、多重介质复杂场域求解，且求解精度高等优点而被广泛用于电器电场的数值求解。
FEM (Finite Element Method) is used for 3d numerical simulation to study micro resistivity imaging logging responses.
采用有限元素法进行三维数值模拟研究微电阻率成像测井响应。
For numerical simulation of photonic crystal fibers with FEM, the effect of material dispersion is considered in the transmission properties.
在对光子晶体光纤数值分析时，加入了材料色散对于传输特性的影响。
FEM software, ABAQUS, is used to model the landing gear for an aircraft, and carry out the numerical simulation for drop test.
利用大型商用有限元软件ABAQUS对某机起落架建模，并进行落震试验数值模拟。
In this paper, the research on numerical simulation of punch-forming parameters for automobile frame parts of sheet metal is done by using the non-linear FEM software SHEET-FORMING.
本文以非线性有限元软件包SHEET- FORMING对某汽车落地骨架零件的冲压工艺参数进行数值模拟研究。
It was shown that the failure members obtained by numerical analysis agreed very well with practical situation, which verified the air temperature rise simulation and the FEM analysis.
有限元数值模拟杆件破坏情况与实际火灾的破坏情况一致，验证了温度分布的正确性和有限元分析过程的合理性。
The basic numerical simulation method is FDM and FEM, but the traditional FDM are not efficient for some models with convection term.
常用的数值计算方法有有限差分法和有限元法，但用标准的有限差分方法求解数学模型时常常失效，根本原因在于对流项的存在。
The numerical simulation of thermal stresses and deformation of an engine cylinder block casting was carried out by FDM/FEM integrated system.
对发动机气缸体铸件从浇注完到开箱落砂后的铸造过程应力场进行计算机数值模拟。
In this paper, the mechanical behaviour of a shield tunnel construction in urban metro adjacent to existing pile foundation is studied by using 3d FEM ANASYS numerical simulation method.
针对城市地铁新建隧道近接既有民房桩基的工程情况，进行了三维有限元数值模拟的施工力学行为研究。
In this paper, the mechanical behaviour of a shield tunnel construction in urban metro adjacent to existing pile foundation is studied by using 3d FEM ANASYS numerical simulation method.
针对城市地铁新建隧道近接既有民房桩基的工程情况，进行了三维有限元数值模拟的施工力学行为研究。
应用推荐