Feeding speed is adjustable for all types of wood processing.
送料速度可调，适合各类木材的加工。
The temperature increases with the sawing speed and the feeding speed.
断续比值增大，锯切弧区温度随之上升。
The feeding speed can be adjusted to synchronize with the press automatically.
依出料速度之需要，自动调控送料时间，配合冲床的冲压速度。
There is an optimal spindle servo feeding speed(SFS) at which the MRR is the highest.
存在一个较佳的主轴伺服进给速度使得工件的加工速度较高。
The conversion of chlorine decreased when the feeding speed of sample was too high or too low.
进样速度过高或过低，都会使氯转化率降低。
Note: the wire feeding speed and the welding voltage are dependent on the selected welding power.
注：送丝速度及焊接电压设置范围与配套焊接电源相关。
The feeding speed must be changed with continuousness and a rule, which can let the lathe work well.
从中可知，旋切过程中刀刃进给速度必须按一定规律变化才能保证旋切机正常工作。
Note: the wire feeding speed and welding voltage set range are dependent on the selected welding power.
注：送丝速度及焊接电压设置范围与配套焊接电源相关。
The paper analyzes the control algorithm of PI, external characteristic of power source and the feeding speed.
分析了PI控制算法、电源外特性控制算法、送丝速度控制算法，以及控制程序的优化设计。
The feeding speed can be adjusted for the different material, thus achieving the most ideal capacity and quality.
送料机构选用无级变速，可根据不同物料，调节相应的进料速度，从而得到最理想的产量和质量。
The stability of arc voltage is realized by adjustment of wire feeding speed in constant wire feeding system of SAW.
在埋弧焊接的变速送丝系统中，其电弧电压的稳定是依靠调节送丝速度实现的。
The results showed as follows:1) RPC had no effect on feeding speed, and had no significant effect on feed intake (P>0.05);
结果显示：1）RPC对山羊采食速度没有影响，对采食量没有显著影响（P>0.05）；
Special design mechanical relaxation installment, Achieves the ideal effect in the feeding speed the punch press coordination.
特别设计的机械式放松装置，在送料速度与冲床配合上达到理想的效果。
Special design mechanical relaxation installment, Achieves the ideal effect in the feeding speed and the punch press coordination.
特别设计的机械式放松装置，在送料速度与冲床配合上达到理想的效果。
The feeding speed of shifting unit of welding machine is one of the most important factors of rail continuous flash welding quality.
影响钢轨闪光焊接头焊接质量的因素很多，其中焊机动力柱的送进速度就是重要因素之一。
The test results showed that raw material, precipitation method, feeding speed and Si modification had great influences on dispersion property.
结果表明，不同原料路线、不同制备方法、不同加料速度以及样品中是否含硅等都对酸分散性能有较大的影响。
The results showed that increasing the feeding speed, the amount of Ca-Fe cored wire and the diameter of the tundish nozzle can prevent blockage.
结果表明，提高喂线速度、加大喂线量和增加水口内径可避免水口的堵塞。
The influences of abrasive grain size, belt speed, contact roller's hardness, grinding depth and grinding feeding speed on surface roughness were discussed.
讨论了砂带粒度、砂带线速度、接触轮硬度、磨削深度和磨削进给速度对表面粗糙度的影响规律。
High speed and high precision machinery should have not only high spindle speed and high feeding speed, but also high spindle and feeding system acceleration.
高速高精度机床不仅要有高的主轴转速和进给速度，而且还需要具有高的主轴和进给系统运动加速度。
Vibrating feeder: installed under the hopper and feeding speed can be adjusted based on real situations. It is stainless steel where it is touching the powder.
振动喂料器：安装在料斗下部，可根据实际情况调节进料速度，与料接触部分为不锈钢。
It has showed that the feeding speed of mixed monomers, temperature for polymerization and the dosage of initiator are main factors controlling the molecular weight.
结果表明，单体加入速度、聚合温度及引发剂用量是决定聚合物分子量的主要因素。
However, if the effective descaling is carried out, it is very important to control the feeding speed of steel billet, the flow rate of water and the pressure of water.
但要实现有效除鳞，控制钢坯速度、水的流量及水压大小至关重要。文章介绍了高压水除鳞控制系统的结构与功能。
Flash can be continual and steady, and then, the good welding joints could be obtained by properly controlling feeding speed of shifting unit of rail continuous flash welding.
有效地控制钢轨连续闪光焊的动力柱送进速度，可以使整个焊接过程保持连续和稳定的闪光，从而获得优良的焊接接头。
The feeding system from coil of this model , for single or double strand, by means of two motorized and braked pay-offs, is controlled by computer to adjust the feeding speed.
本机型配有两个放线架，可适合于单线和双线加工，由计算机控制、电机驱动和制动来调节放线速度。
The stepless variable speed motor is used for the feeding mechanism. The feeding speed can be adjusted for the different material, thus achieving the most ideal capacity and quality.
送料机构选用无级变速，可根据不同物料，调节相应的进料速度，从而得到最理想的产量和质量。
A mathematical model for feeding strip steel process has been developed using energy conservation principle on traveling thin-cell and introduction of relative steel strip feeding speed.
利用旅行薄片微元体能量守恒原理，引入喂钢带相对速度参量，建立了结晶器喂钢带连铸工艺的数学模型。
A mathematical model for feeding strip steel process has been developed using energy conservation principle on traveling thin-cell and introduction of relative steel strip feeding speed.
利用旅行薄片微元体能量守恒原理，引入喂钢带相对速度参量，建立了结晶器喂钢带连铸工艺的数学模型。
应用推荐