The diagram of system structure and the simplified program flowchart are given. In addition, the operational curves of both fuzzy control and feedforward feedback control are compared.
最后给出系统结构图和程序流程简图，并将模糊控制运行曲线与前馈-反馈控制运行曲线进行了比较。
He can use the concept of feedforward, concurrent, and feedback control to identify measures for deterring or reducing employee theft.
他可以利用前馈，同期和反馈控制的概念来鉴定防止或减少员工偷窃的方法。
A successive approximation algorithm of feedforward and feedback optimal control for linear systems with state time-delay affected by persistent disturbances is presented.
针对外部持续扰动下的线性时滞系统，提出一种前馈-反馈最优控制的逐次逼近算法。
Using both feedforward and feedback control techniques, the scheme realizes well control for output current of voltage-source inverter.
通过前馈与反馈控制技术，该方案实现了对系统输出电流的良好跟踪和简单控制。
The feedforward feedback method was used in oxygen replenishment control.
在氧气补充控制中采用前馈反馈控制方式。
A feedforward and feedback linear quadratic optimal control problem of vehicle active suspension systems is considered.
研究汽车主动悬架系统的线性二次型前馈反馈最优控制问题。
Workplace security: Once again , we can use the concept of feedforward, concurrent . and feedback control to identify actions that managers can take.
再一次，我们可以使用事前、事中、事后的原则控制以识别管理者采取的行动。
A feedforward feedback fuzzy control scheme is presented for the control of sinter burn through point.
针对烧结终点控制提出前馈反馈模糊控制的方法。
This information was used for studies, not just for feedback or feedforward control.
这些信息不仅仅是反馈或是前馈控制，还供研究所用。
Based on direct yaw moment control (DYC) method, the vehicle stability controller with a feedforward and feedback compensator is designed.
基于直接横摆力矩控制方法，设计了一种前馈—反馈补偿控制的车辆稳定性控制器。
The intelligent control system consists of reference governor, neuro-fuzzy feedforward controllers, fuzzy feedback controllers and fossil-fuel power unit (FFPU).
该系统包括设定值调节器、神经网络模糊前馈控制器、模糊反馈控制器和单元机组。
As the adaptive feedforward control method used for active control of periodic vibration has many shortcomings, an adaptive feedback control method was proposed based on on-line frequency estimation.
针对自适应前馈控制方法的缺点，提出一种周期性振动主动控制的自适应反馈控制方法。
According to coking mechanism, a feedforward model was built for heat supply, and carbonization index CI feedback model was proposed to control coking.
根据焦化机理建立焦炉供热量前馈模型，并提出结焦指数CI反馈模型控制焦炉的炼焦过程。
Motivated by the designing idea of conventional feedforward control, an adaptive feedback-feedforward control scheme based on neuro-fuzzy system is proposed.
在前馈控制器设计思想的启发下，提出了一种基于神经模糊系统的自适应前馈-反馈控制系统。
Based on the feedback control, the neural feedforward compensation was applied in oxygen control of closed cycle diesel.
在闭式循环柴油机配氧反馈控制的基础上采用了神经网络前馈控制策略。
The design problem of a feedforward and feedback optimal control law is studied for linear systems affected by additive persistent disturbances.
针对具有外部持续扰动的线性系统，研究前馈反馈最优控制律的设计问题。
The research shows that the active noise controls adopted feedforward technology or feedback technology is correspond to adaptive control with measurable noise or immeasurable noise.
研究表明，采用前馈和反馈技术的有源噪声控制分别与控制理论中的干扰可测和干扰不可测的自适应控制相对应。
The obtained optimal control law consists of analytical linear feedforward and feedback terms and a nonlinear compensation term which is the limit of the adjoint vector sequence.
得到的最优控制律由解析的线性前馈-反馈项和伴随向量序列极限形式的非线性补偿项组成。
We give the existence and uniqueness conditions of the feedforward and feedback optimal control law, and present an actualizing algorithm of solving the optimal control law.
给出了前馈-反馈最优控制律的存在唯一性条件，并提出了最优控制律的实现算法。
The elongation control system of cold rolling skin pass mill was described; the speed feedforward control and feedback control in the control system were detailed explicated.
描述了应用于唐钢冷轧薄板厂平整机组的延伸率控制系统，对该延伸率控制系统中的速度前馈控制和延伸率反馈控制做了重点阐述。
APF then access points al0ng the harmonic current feedback, as a regulator input, adjusted feedforward control error.
再将有源滤波器接入点后的线上电流的谐波分量反馈回来，作为调节器的输入，调整前馈控制的误差。
Developed the fuzzy control model of sintering burning-through-point with fuzzy theory, and put forward the feedforward-feedback fuzzy control method.
运用模糊控制理论研制出烧结终点位置模糊控制模型。提出了前馈-反馈控制方法。
The feedforward and feedback are combined to control the macro stage, and the fuzzy-adaptive PID control algorithm is employed in the micro stage.
在分别建立宏动、微动、宏微机构模型的基础上，提出复合型宏动控制和模糊自校正PID微动控制的宏微控制策略。
A general purpose feedforward-feedback control algorithm feasible to the process control has been developed. This is a kind of standard pattern formula with form fixed and parameters to be determined.
介绍一种在过程控制中实际可行的通用前馈-反缋控制算法-形式固定而参数待定的标准算式。
Feedforward control and feedback control are necessary for precise coiling temperature control. The control models and control strategy have been used on sit...
卷取温度的前馈控制和反馈控制对卷取温度控制精度的提高是必不可少的手段。
By applying the structure invariant theory in the control strategy, the feedforward-feedback control theory is applied in the control system design to reduce the redundant force.
论文从控制系统的结构方面，利用结构不变性原理，针对位置扰动设计专门的前馈补偿控制器，减小位置扰动的影响。
These main jobs completed are included: the cascade feedforward-feedback control system of the once-through stream generator is advised.
本文完成的主要工作有：设计直流蒸汽发生器的串级前馈—反馈控制系统。
These main jobs completed are included: the cascade feedforward-feedback control system of the once-through stream generator is advised.
本文完成的主要工作有：设计直流蒸汽发生器的串级前馈—反馈控制系统。
应用推荐