The feed speed is automatically adjustable on line and this interpolation method can be applied to...
本方法可以实时自动调整进给速度，可用于自适应切削加工过程和柔性制造加工。
The thrust is greatly affected by the feed speed while the torque is obviously affected by drill geometries.
进给速度对轴向力的影响较大，而钻头几何形状对扭矩的影响较大。
The feed speed is automatically adjustable on line and this interpolation method can be applied to the adaptive…
本方法可以实时自动调整进给速度，可用于自适应切削加工过程和柔性制造加工。
The three schemes for feed control not only effectively control the feed speed of the semi-floating plug but also sui...
以上三种控制方案，不仅能有效地控制半浮芯棒的速度，还能适用于其它场合动力性负载的速度控制。
The three schemes for feed control not only effectively control the feed speed of the semi-floating plug but also suit the speed...
以上三种控制方案，不仅能有效地控制半浮芯棒的速度，还能适用于其它场合动力性负载的速度控制。
Vibrating direction Angle and motor speed has great impact on the vibrating system and stuff feed speed of grain clearing equipment.
振动方向角和电机转速对粮食清理设备的振动体制和物料推进速度有很大影响。
Based on test data, we made a qualitative analysis for feed speed, die form, extrusion components, water quantity and spindle speed.
本文根据试验数据就喂料速度、出料方式、挤压部件、加水量和主轴转速对挤压机性能的影响，作了定性分析。
The results show that the effects on surface roughness are feed speed, depth of cutting , tool rake angle and parts hardness in turn.
结果表明：工件进给速度对表面粗糙度的影响最大，切削深度和刀具前角次之，工件硬度影响最小。
The feed speed of programming must be corrected for realizing high-efficiency machining, and the calculation method of speed was given.
为了实现高效率加工，需要对编程进给速度进行必要的修正，并给出了速度修正的计算方法。
At the same time with high mechanical strength, sealing performance, and feed speed, low energy consumption, easy to operate and so on.
同时具有机械强度高、密封性能好、进料速度快、耗能低、操作简便等特点。
The quality of the workpiece surface is subject to the matching relation between the feed speed and the sawing speed to some large extent.
框锯机锯切工件表面加工质量在很大程度上取决于进给速度和锯切速度的匹配关系。
By changing the speed of grinding wheel, its swing frequency and the feed speed of shaft direction, different experiment results were got.
通过改变砂轮转速、砂轮摆动频率、轴向进给量，获得了一些具有对比性的试验结果。
The three schemes for feed control not only effectively control the feed speed of the semi-floating plug but also suit the speed control ofd...
以上三种控制方案，不仅能有效地控制半浮芯棒的速度，还能适用于其它场合动力性负载的速度控制。
The sawing speed curve is unchangeable, but the feed speed curve can be different with different length ratio of members of the feeding mechanism.
锯切速度曲线是不可变的，但进给速度曲线随进给机构杆长比的不同而变化。
In single factor test, the influencing factor of tools wear was discussed, such as tool material, cooling conditions, cutting depth and feed speed.
以单因素实验法分别考察了刀具材料、冷却条件、切削深度、进给速度等对刀具磨损的影响规律。
The feed speed and quantity of the grinding wheel, grinding pressure, rotating speed of the feeding plate all can be programmed on the computer screen.
具有自动检测、补偿、报警功能，其砂轮进给速度、进给量、磨削压力和送料盘的转速都可以通过显示屏进行编程。
With the variety of wire feed speed, the interval of each phase of droplet transformation has a great influence on the breaking state of liquid Bridges.
随着送丝速度的变化，熔滴过渡各阶段时间影响液桥分断时的表面张力过渡。
With the cooperative control of drawing temperature and feed speed, the final hole structure can be effectively controlled by tuning the applied pressure.
在温度和送料速度的协调控制下，通过调节气压参数可有效控制气孔结构。
The testing way of reversal value was introduced, and the complement method was presented based on the character that reversal value varys with feed speed.
介绍了反向偏差的测定方法及其随进给速度变化而变化的特点，并基于该特点给出了相应的补偿方法。
Interpolation algorithm is the core technology in Numerical Control (NC), which has direct impact on the control accuracy, feed speed and machining capacity.
插补算法是数控系统的核心技术之一，插补算法的选择及算法特性直接影响到数控系统的控制精度、速度及加工能力等。
Considering the kinematic features of the five-axis CNC parallel machine tool (PKM), a feed speed control method is proposed based on the known research fruits.
针对五轴并联数控机床的特点，文章在已有的研究基础上提出一种加减速控制方法。
The feed speed is automatically adjustable on line and this interpolation method can be applied to the adaptive machining process and the flexible manufacturing.
本方法可以实时自动调整进给速度，可用于自适应切削加工过程和柔性制造加工。
The system is ideally suited for the coned of submerged are welding with constant wire feed speed, and has increased the level of automation of the arc welding...
系统可用于等速送丝埋弧自动焊的控制，提高了焊接装备自动化水平，在微机应用于焊接领域的研究中作了进一步的探索。
The simulation calculating shows that, the computing time can be shortened, the real-time operation is good, the interpolation accuracy is higher, and the feed speed is even.
计算实例表明，使用这个方法可以缩短插补计算时间，实时性好，插补精度高，进给速度波动范围小。
This machine is suitabw for skiving leather of various materials , Feed is controlled by an indiviual motor , which can adjust the feed speed according to the required tecchnology.
本机适用于各种材质皮料切削工艺。送料有单独调速电机控制，根据工艺要求可自由调节送料速度。
This paper studies the influence of extrusion temperature. Screw speed, feed speed and water content on starch gelatinization depolymerization, soluble index and expansion efficiency.
研究了挤压过程中，挤压温度、螺杆转速、进料速度、原料水分含量对淀粉的糊化、降解及对挤出物的溶解指数和膨化度的影响。
Using the binomial fitting method in MATLAB to program numerical calculation program, the analytical formulations between feed speed, width-radius ratio and width spread ratio were deduced.
使用MATLAB编写了数值计算程序，采用二项式拟合的数值方法，总结归纳出了进给速度和宽径比与宽展率之间的解析公式。
The feed speed and depth of blade carrier is adjustable, for electrical equipment, adopt PLC as the core, and the feeding, positioning, clamping and cutting (chamfering) can be finished in turns.
刀架的进给速度和深度可调，电器部分采用可编程序控制器“PLC”为核心，送料、定位、卡紧、切断(倒角)可依次完成。
The feed speed and depth of blade carrier is adjustable, for electrical equipment, adopt PLC as the core, and the feeding, positioning, clamping and cutting (chamfering) can be finished in turns.
刀架的进给速度和深度可调，电器部分采用可编程序控制器“PLC”为核心，送料、定位、卡紧、切断(倒角)可依次完成。
应用推荐