A new process of barrel Ni-Fe alloy plating was developed.
研制出一种滚镀镍铁合金新工艺。
The mechanisms of anomalous codeposition of Ni-Fe alloy was discussed.
讨论了铁镍合金异常共沉积的机理。
The Zn-Ni and Zn-Fe alloy plating processes and their characteristics are introduced.
介绍了电镀锌-镍合金与电镀锌-铁合金的工艺，并突出介绍其工艺特点。
The age hardening characteristic of Cu Ni Si Cr Fe alloy has been investigated in this paper.
因而研究铜在钢中的时效强化、沉淀规律具有重要意义。
The Tm- Fe alloy films obtained at room temperature are amorphous by x - ray diffraction (XRD).
射线衍射分析表明：室温下所得合金膜衍射峰是弥散的包峰，所得到的合金膜是非晶态的。
The present invention discloses one kind of Al-Mg-Fe alloy for deoxidizing and desulfurizing molten steel.
本发明公开了一种用于钢液脱氧脱硫与合金化的铝镁铁合金。
The paper includes two parts, and the focal point of this part is the Fe-Cr-Al, Fe-Cr-Si andnoncrystalline Fe alloy.
全文共分两部分，下半部分主要介绍在铁铬铝系合金、铁铬硅基系合金和非晶态铁基系合金特性研究方面的进步。
A new technology for preparation of Ti-Fe alloy coating on the steel substrate was investigated by high temperature sintering method.
进行了高温烧结法在钢基体的表面上制备钛铁合金涂层的新工艺研究。
The result indicated that the Al - Mn- Fe alloy deoxidant can increase utilization ration of aluminum, decrease content of oxygen and nitrogen and inclusion in the steel.
铝锰铁复合脱氧剂脱氧与铝铁脱氧比较，可提高铝的利用率，降低钢中氧、氮气体及夹杂物含量，有利于减少连铸水口堵塞，提高钢液的纯净度。
The drawing difficulty is settled by adopting small draught and multi-pass drawing process, reducing the thickness of Zn-Fe alloy and using artificial aging process actively.
通过采用小压缩率多道次拉拔工艺，减少锌-铁合金的厚度，积极采用人工时效工艺等解决了拉拔困难的问题。
This paper briefly introduced the phosphating treatment technology Zn - Fe alloy plating, and discuss the influence of technology parameters on quality of phosphatic coating.
简要介绍电镀锌铁合金后的直接磷化处理工艺；讨论工艺参数对磷化膜质量的影响。
On the basis of analysis of activated silicon and aluminum components, a new smelting process of Si Al Fe alloy by use of coal spoil for replace a part of bauxite was proposed.
通过分析煤矸石的活性硅、铝成分，提出了以煤矸石代替部分铝钒土冶炼硅铝铁合金。
For the flash, a very common phenomenon in Cr-Fe alloy argon-oxygen decarburization refining process, here the splash-prediction method is proposed based on binary tree SVM (BT-SVM).
针对铬铁合金氩氧精炼过程中时常发生的喷溅现象，提出一种基于BT - SVM的喷溅预测方法。
Holding primary hardness, magnetism and plating properties of matrix, protection performance of steel was improved by combining the Zn - Fe alloy electroplating and phosphating technology.
为了保持基体金属硬度、磁性以及电镀层性能等均不变，将锌铁合金电镀工艺与磷化工艺进行了组合，以提高钢铁件的防护性能。
This paper analyzes operation process of high magnet conductive loop Ni Fe alloy coil under square wave voltage. By analysis, this kind of voltage sensor is proved to have fast response time.
分析了高导磁环形镍铁合金线圈在方波电压下的工作过程，论证了这种线圈构成的电压传感器有极快的响应时间；
The amorphous Fe Cr alloy coatings were obtained by controlling the composition of bath operation conditions.
本实验通过控制镀液组成和操作条件获得了非晶态铁-铬合金镀层。
The mechanism of Fe-based alloy coating for thermal fatigue damage resistance of wheel cast steel was analyzed by SEM.
用扫描电镜分析研究了铁基合金涂层对车轮铸钢材料抗热疲劳损伤机制的影响。
Fe Cr alloy coatings were obtained by controlling the composition of bath operation conditions.
本实验通过控制镀液组成和操作条件获得了非晶态铁-铬合金镀层。
The feasibility of repetitive use of Fe-based shape memory alloy lock nut has been studied in order to lower the usage cost.
为了降低铁基形状记忆合金防松螺母的使用成本，探索了该新型螺母重复使用的可行性。
The effect of Fe-B alloy and Mo on sintering of steel based carbide is reviewed.
对铁硼合金和钼对钢结硬质合金烧结的影响进行了综述。
The microstructure of a new vacuum melting Fe-base alloy coating has been studied.
分析了一种新型真空熔结铁基合金涂层的组织结构。
The cyclic oxidation life of Fe-Cr-Al alloy is thus significantly increased by optimum yttrium addition.
因此，钇可以大幅度提高铁铬铝电热合金循环氧化寿命。
When producing the rare earths Fe-Cr-Al alloy by electroslag remelting method, the optimum quantity of rare earths added to three phase lining electroslag furnace is 0.5%.
电渣双联法生产稀土铁铬铝合金时，稀土在三相有衬电渣炉中的最佳加入量为0.5%。
Using electron microscopy and X-ray diffraction techniques, the structure changes of Fe-Cr-Al alloy being used at low temperature for a long time were investigated.
应用电子显微镜、X射线衍射技术，对低温长期使用的铁铬铝电热合金进行分析。
The influence of Fe and Mn on the tensile properties of ZA27 alloy at high temperature has been investigated.
研究了元素铁和锰对ZA27合金高温拉伸性能的影响。
The amorphous Fe-W alloy film is observed to have an excellent resistance to corrosion.
非晶态合金镀层的阳极极化曲线表明，镀层在酸性环境中具有优良的耐腐蚀性能。
A new Fe-base wear resistant alloy is mainly used for components and parts for long-term use under the condition of an erosion of high temperature flue gas.
新型铁基耐磨合金主要用于在高温烟气冲刷(蚀)条件下长期使用的零部件。
The GMI effects have been observed in two Co-Rich amorphous ribbons and a Fe-Rich alloy ribbon.
我们研究了三种非晶合金薄带的巨磁阻抗效应。
The GMI effects have been observed in two Co-Rich amorphous ribbons and a Fe-Rich alloy ribbon.
我们研究了三种非晶合金薄带的巨磁阻抗效应。
应用推荐