According to introduction of FE model of one bus body structure, the process of analyzing bus body structure based on ANSYS is illustrated in this paper.
通过介绍某型号大客车车身结构的有限元模型，阐述了利用ANSYS有限元软件对大客车车身结构分析的基本过程。
With modern CAD method and smart skill of making mesh used, finite element (FE) model is established and the problem of complicated structure and large dimension is solved.
应用计算机辅助设计和有限元网格划分的技巧和方法建立有限元模型，有效解决车体结构复杂和尺寸庞大的问题。
The FE analysis also shows that with properly created model, the penetration process, penetration properties of steel plate by FSP and target damage mode can be simulated very well by using FE method.
有限元分析结果还表明，采用适当的模型，有限元法能较好地模拟破片模拟弹侵彻钢板的侵彻过程、侵彻特性以及钢板的破坏模式。
With modern CAD method and smart skill of making mesh used, finite element(FE) model is established and the problem of structure of heavy truck body and large dimension are solved.
应用计算机辅助设计和有限元网格划分的技巧和方法建立有限元模型，有效地解决矿用汽车货箱结构和尺寸庞大的问题。
A finite element(FE) model for a tripot universal joint is developed, and a FE analysis on the contact stresses in the parts of the joint under extreme torque is conducted using ANSYS software.
将轿车三枢轴式等速万向节的三维模型经过结构简化离散成有限元模型，并应用ANSYS软件对其承受极限转矩时的内部接触应力进行有限元分析。
A mathematical model is developed to analyze the movement of Fe Mn alloy in a bottom stirred ladle, the melting process and trajectories of alloying addition movement are calculated.
建立了底吹钢包内加入合金后的运动过程数学模型，计算了铁锰合金颗粒在吹氩钢包内的熔化过程和运动轨迹。
The FE model of the highspeed machining center is established using the software ANSYS. The influence of guideway 'rigidity on natural frequency of the highspeed machining center is discussed.
利用ANSYS建立了某型号高速加工中心的有限元整体分析模型，探讨了不同位置导轨的刚度变化对高速加工中心固有频率的影响。
Using the FE model, the load versus deformation curve of the concrete filled stainless steel tubular column was compared with that of the conventional concrete filled carbon steel tubular column.
利用有限元模型，比较了不锈钢管混凝土和普通钢管混凝土轴压构件的荷载-变形关系曲线。
The FE model for the underground LHD machine's bodywork structure was built and the simulation methods for its joint, hydraulic actuator, tyre and boundary conditions were proposed.
建立了地下铲运机整机结构有限元模型，提出铰销、油缸、轮胎及边界条件的模拟方法。
On the basis of this, the two dimensional FE model that can consider rheology of soil and simulate the staged construction of excavation was set up.
在此基础上，建立了可考虑土体流变性态的二维施工模拟有限元模型。
The results indicate that the theoretical results are right, and the FE model and experimental method are feasible.
结果表明理论分析方法是正确的，有限元模型和模态实验方法也是可行的。
The calculated end displacements are input into the FE model as boundary conditions to compute the stress, strain and springback of the workpiece.
将这些位移作为边界条件输入有限元模型中计算毛料应力、应变和回弹。
The influence of the initial curing temperature on the curing temperature field and curing state field of tire was investigated by simulating the curing process of tire with a 3D FE model.
建立三维有限元模型模拟轮胎硫化过程，研究初始硫化温度对轮胎硫化温度场及程度场的影响。
With modern CAD method and smart skill of making mesh used, finite element (FE) model is established and the problem of structure of heavy truck's body and large dimension is solved.
应用计算机辅助设计和有限元网格划分的技巧和方法建立有限元模型，有效的解决矿用汽车货箱结构和尺寸庞大的问题。
Combining with the FE model condensation technique, the request of the testing model dimensions is decreased.
并且结合模型缩聚技术，降低了模型测量维数的要求。
Transverse 2-dimensional FE model of the staggered truss system is set up by arranging adjacent frames parallelly and coupling lateral displacements of all nodes on the same floor.
采用将交错桁架体系中相邻两榀平面结构并列放置，耦合相同楼层所有节点的水平位移的方法建立了交错桁架体系的横向平面分析模型；
Methods. A detailed finite element (FE) model of the human body in the driver-occupant position was used to investigate cervical hyperextension injury.
方法：详尽的在驾驶员-乘客位置上的人体有限元(fe)模型，被用于研究颈椎伸展过度性损伤。
The parametric FE model of three-box type body is created.
建立了基于三箱式轿车结构的参数化分析模型。
Aim:To investigate the therapeutic effects of squidink melanin-Fe on the iron deficiency anemia(IDA) model rats.
目的：探讨鱿鱼墨黑色素铁对缺铁性贫血（IDA）模型大鼠的治疗作用。
The comparison of the rigid pushing model and a conventional FE model shows that the rigid pushing model can greatly improve the efficiency of the simulation with the same (accuracy.)
刚性体推动模型与常规有限元模型的比较结果说明刚性体推动模型可以在获得相同的精度前提下，显著地提高运算效率。
The effects of muscle loadings on bone remodeling were investigated using an orthotropic algorithm combined with a finite element (fe) model based on computed tomography (ct) data.
该文基于CT数据建立股骨有限元模型，用正交异性算法仿真了肌力对骨再造的影响。
The FE analysis to the rotor of a multistage centrifugal pump has been studied based on the software ANSYS. The entity model and FE model of the rotor are built for the static and modal analysis.
使用ANSYS软件对一台多级离心泵的转子部件进行有限元分析，建立了转子部件的实体模型和有限元模型，对转子部件进行静力及模态分析；
To a certain SRV(sport recreational vehicle), firstly BIP(body in prime) FE model and acoustic FE model were built by experiments and CAE modal analysis.
通过实验和CAE模态分析建立了某SRV白车身的有限元模型和声腔有限元模型。
The main source for structural nonlinearity is summarized, and a FE model for the primary mirror subassembly of a collimator is established on the basis of contact theory.
介绍了产生结构非线性的主要来源，并在接触理论的基础上对主反射镜组件进行了合理的有限元建模。
Tests were made on the strength of ACY-2 LHD machine's bodywork structure, which validated the correctness of the FE model.
进行了ACY - 2型地下铲运机整机结构强度实验，验证了整机有限元模型的正确性。
Rice bran was selected as material and treated with commercial phytase for study on availability of Ca, Fe and Zn with in vitro model.
以米糠为原料，通过植酸酶处理以降解其中的植酸，并采用体外消化方法分析处理后的米糠的钙、铁、锌的吸收率。
Rice bran was selected as material and treated with commercial phytase for study on availability of Ca, Fe and Zn with in vitro model.
以米糠为原料，通过植酸酶处理以降解其中的植酸，并采用体外消化方法分析处理后的米糠的钙、铁、锌的吸收率。
应用推荐