This paper discusses the robust fault isolation of faulty sensors in a jet engine system.
本文讨论了鲁棒故障检测滤波器在喷气式发动机传感器故障诊断中的应用。
Fault tolerant technology for dynamic systems includes fault detection, fault isolation (FDI), and system reconfiguration.
所讨论的动态系统的容错技术包括故障检测、故障定位和系统重构技术。
Event correlation is an important fault isolation policy and has been a key topic in the area of network fault management.
事件关联是重要的故障定位策略，已成为网络故障管理的研究热点。
Long mean fault isolation time (MFIT) and being incapable of quickly automatic building of FI decision-making tree are the disadvantages of existing methods.
大型复杂系统的故障隔离是系统维修的重要环节，现有的故障隔离算法存在平均故障隔离时间（MFIT）长，不能快速自动生成决策树等缺点。
Security: from a hardware level fault isolation and security platform built-in ARP attack protection, and large-scale promotion distributed anti-DDOS attack.
安全性：从硬件级别上实现故障和安全性的隔离，平台内置arp攻击防护能力，分布式和规模化提升防ddos攻击能力。
In the end, the boundary scan test technology is introduced as the useful complement to functional self-test method, which can improve the fault isolation rate.
最后介绍了边缘扫描测试技术，指出边缘扫描测试技术是功能自测试方法的有益补充，能够有效提高测试的故障隔离率。
The result shows that the proposed diagnostic strategy generation method and software can analyze the loops effectively and achieve the fault isolation accurately.
验证与应用结果表明，本文的回路系统诊断策略设计方法及软件可以有效分析回路、实现回路系统中的故障隔离。
After a fault is detected from the IKPCA monitoring statistics, variable contribution plots are constructed for fault isolation based on sensitivity analysis theory.
在IKPCA监控统计量检测到故障后，基于灵敏度分析思想构造贡献图分离故障变量。
When the redundancy of the gyroscopes can not meet the condition of consistency check, fault isolation of the gyroscopes can not be realized only by hardware redundancy.
当卫星速率积分陀螺的配置冗余度不满足一致性检验条件时，不能单纯利用硬件冗余实现陀螺的故障定位。
Based on performance of real-time and closed loop feedback flight control system, a set of robust adaptive observers are set up for sensor fault isolation and reconfiguration.
考虑到飞行控制系统闭环反馈及实时的特性，设计了多个鲁棒自适应观测器用于传感器的故障隔离与重构。
Then, examined the relationship of tests and tests, tests and fault isolation conclusions, an indirect-entropy algorithm for system-level fault isolation strategy is proposed.
在此基础上，通过综合考虑测试与测试、测试与故障隔离结论的关系，提出了系统级故障隔离的间接熵法。
The PCA method is mainly used to research on fault detection while FDA to fault isolation and identification. The two methods interact and make up a complete fault diagnosis system.
其中着重使用PC A方法进行故障检测的研究，使用FDA方法进行故障分离和识别的研究，并将两种方法相互配合，构成完整的故障诊断系统。
Since you are trying to do fault isolation, to fix the problem and not the blame, any differences in the local and remote agent response times immediately identifies network slowdowns.
您的目的是尽量找出故障，修复问题，避免受到指责，而如果本地与远程代理响应时间有任何差别，则立刻可以确定是网络速度降低。
Eigenfunction is used to describe ambiguity sets for analog circuit diagnosis. Fault isolation and conditional fault isolation are proposed to identify isolation ability of test node.
采用故障特征函数描述模拟电路故障字典法中的模糊集，提出了节点故障隔离度和条件故障隔离度的概念，用其描述节点对故障的区分能力。
The method for fault isolation is presented by separating this fixed direction from the directions in the parity space of the other factors by using the optimal transformation matrices.
通过选取最优转换矩阵，将这一方向与其它因素在一致空间中所在方向相分离，提出一种故障隔离的方法。
The redundancy management technique of modular-level reconfiguration computer system HIT-FTC2 is introduced: fault detection, fault masking, fault isolation, reconfiguration and fault recovery.
本文介绍了模块级可重构计算机HIT -FTC2的冗余管理技术，包括：故障检测，故障屏蔽，故障隔离，系统重构与故障恢复等技术。
Designing appropriate fault tolerant mechanisms to maintaining ACID (Atomicity, Consistency, Isolation and Durability) properties in process flows poses a big challenge in designing SOA solutions.
设计合理的容错机制以维持流程中的ACID(原子性、一致性、隔离性和持久性)特性是设计soa解决方案的一大挑战。
Methods are put forward which are used for unorthodoxy placement gyro fault detection and isolation when the three gyros have trouble by the attitude signal.
提出了利用姿态角传感器在非正交配置的陀螺仪发生三个以上的故障时进行故障检测与隔离的方法。
This article presents a searching tree based algorithm of fault location, isolation and restoration of distribution system on the basis of distribution network characteristics.
针对配电网络结构特点，提出了一种基于树形搜索的配电网故障区域检测、隔离及恢复算法。
In other words, the correct fault detection and isolation decision will further lead to optimal performance of the system.
换言之，正确的故障检测和分离决策将进一步加强系统的优化性能。
A set membership filtering algorithm using ellipsoidal sets for nonlinear systems with unknown but bounded noises is proposed and applied to guaranteed fault detection and isolation(FDI).
针对带有未知但有界噪声的非线性系统，提出一种椭球集员滤波算法，并将其应用于保证故障检测与隔离。
A new parametric observer-based approach for robust fault detection and isolation in linear time-delay systems with unknown disturbances is proposed.
针对一类具有未知干扰输入的时滞线性系统，提出一种鲁棒故障检测与分离的完全参数化方法。
It's one of the most important function for distribution automation to realize fault location, fault section isolation and service restoration in time when fault happens.
配电网发生故障时迅速判断故障地点并隔离故障区段，及时恢复供电，是配电自动化最重要的功能之一。
By appropriately choosing the free parameter satisfying some constraints, the robust fault detection and isolation scheme is realized by employing only one observer-based residual generator.
通过适当选择满足一些约束的自由参数，仅使用单一观测器实现了鲁棒故障检测与分离设计。
A parametric observer-based approach for robust fault detection and isolation in multivariable linear systems with unknown disturbances is proposed.
针对具有未知干扰输入的多变量线性系统，提出一种鲁棒故障检测与分离的完全参数化方法。
Focus on the master-slave regional pilot program conducted in-depth research, including fault detection and isolation algorithm, the design and implementation of device and communications programs.
重点对其中的主从式区域纵联方案进行了深入研究，包括对故障检测与隔离算法的研究、相应软硬件装置的设计与实现和通信方案的研究等。
Then based on the primary isolation result, the fault is accurately located by the multiple-model fusion filtering algorithm, and the fused state and fault estimates are obtained as well.
在初步分离结果的基础上，利用多模型融合滤波算法对故障进行精确定位并得到状态和故障的融合估计。
It is pointed out that this system has the function of self diagnosis, the system fault automatic isolation function, the anti lightning and overvoltage protection function.
指出该系统具有自诊断功能、系统故障自动隔离功能、抗雷击和过电压保护功能。
The reliable action of fault direction element, reasonably design of fault detection and isolation algorithm and fast communication is the key to program implementation.
其中方向元件的可靠动作、故障检测与隔离算法的合理设计和通信的快速可靠是方案实现的关键。
A new parametric observer-based approach for robust fault detection and isolation in linear time-delay systems with unknown disturbances is proposed.
针对具有未知干扰输入的多变量线性系统，提出一种鲁棒故障检测与分离的完全参数化方法。
应用推荐