Correctness of the conclusion was validated through dynamic fatigue experiments.
最后通过动态疲劳实验验证了结论的正确性。
The parameters of glue damage development were obtained by the fitting curves of fatigue experiments.
通过胶层材料的疲劳性能实验曲线拟合得到损伤演化参数。
The domestic situations of fatigue experiments on parts and components of construction machines are also discussed.
对国内开展工程机械零部件的疲劳试验研究进行了探讨。
This paper deals with the load-deflection and load displacement curves of beams basedon the fatigue experiments of plated and unplated RC beams.
本文通过钢筋混凝土芯梁及粘贴钢板补强混凝土复合梁的疲劳试验，研究了它们在疲劳试验过程中载荷和加载线位移及跨中挠度的变化规律。
Taking composite radome used on ship mast as an example, the method and procedure how to simplify structural fatigue experiments to componential ones are expounded.
针对舰船桅杆上的复合材料雷达罩，阐述如何将结构疲劳实验简化为部件疲劳实验的具体方法和过程。
It is a new problem how to make sure these parameters to intensive fatigue experiments due to the lack of the standards of fatigue failures for the rubber materials.
由于缺乏防振橡胶制品的疲劳失效标准，因此，如何确定防振橡胶强化疲劳试验的参数就成为新的研究课题。
Chapter 2: discuss experimental techniques of concrete under multiaxial fatigue load, carry out concrete uniaxial fluctuating compression fatigue experiments and analyze the experiment results.
第二章介绍混凝土多轴疲劳实验技术，进行了混凝土单轴受压疲劳实验，并对实验结果进行了理论分析。
Experiments of contact fatigue under the action of combined stresses-Hertsian stress and rotating bending stress were carried out.
作者就赫兹应力和旋转弯曲应力联合作用下的接触疲劳进行实验研究。
Experiments have proved that visualized IGA has a faster convergence velocity and is very helpful to ease user fatigue.
实验证明可视化iga较一般的IGA有更快的收敛速度，对减轻用户疲劳有很好的作用。
Fatigue crack characteristics are investigated based on the dynamic response simulation by finite element and the dynamic response experiments for tensile-shear spot-welded specimens.
利用三维有限元模拟和动态响应试验对点焊接头疲劳裂纹萌生和扩展特性进行了研究。
Under the condition of our experiments, the main forms of contact fatigue failure are deep-spalling and shallow - spalling.
在本试验条件下，接触疲劳失效的主要形式为深层剥落和浅层剥落。
Then, by reasonably defining damage factors, the fatigue damages and the corresponding evolution principles of the new material and the steel fiber-reinforced concrete were measured by experiments.
通过合理定义损伤变量，由试验测定了新材料和钢纤维增强混凝土的疲劳损伤及其演化规律；
Based on the experiments, fatigue life distribution of RPC is studied using fatigue life statistics theory, the fatigue life equation is established.
在实验基础上，用疲劳统计学理论研究了RPC弯曲疲劳寿命的概率分布规律，得出RPC的疲劳寿命方程。
The experiments on contact fatigue and bearing life have been conducted.
进行了接触疲劳、轴承寿命试验。
Firstly, simulated . experiments of FOD on the leading edge of the blade were performed. Then, the damaged blades were fatigue tested.
首先对叶片进气边分区进行了模拟外来物损伤试验，并对外伤叶片和损伤后的修理叶片分别进行了疲劳试验。
The relation between laser texturing overlaid rate and 18-8 stainless steel fatigue life was analyzed by numerical simulation and related experiments.
通过模拟分析，对激光毛化18 8不锈钢的疲劳寿命与毛化覆盖率的关系进行研究，预测结果与相关实验结果进行对比。
Through physical and chemical experiments, it is obtained that the break of the CAM shaft is a torsional fatigue break.
通过理化试验，得出凸轮轴断口属扭转疲劳断口。
Experiments demonstrate that leaf spring crack results from rust spot as fatigue crack initiation, and in order to improve spring life it must be to improve coating quality.
通过试验证明了锈点是导致钢板弹簧断裂的新的疲劳源，为提高弹簧的使用寿命必须提高其涂层质量。
A lot of experiments have shown that there is an obvious relation between surface qualities of specimen after laser shock-processing (LSP) and its fatigue life.
大量的实验表明，经激光冲击处理后，材料受冲击区的表面质量与材料的疲劳寿命有着明显的关系。
An automatic compliance crack length measurement system for fatigue crack propagation test was used in the experiments.
研究中应用了一种柔度法疲劳裂纹自动测量系统进行裂纹长度测量。
Experiments show that Self-Piercing Riveting (SPR) is better than spot welding with regard to static strength and fatigue strength for aluminum alloys joining, SPR has a prominent application.
试验证明，自冲铆接工艺在连接铝合金时，无论是抗静拉力和抗疲劳性都要好于点焊工艺，因此，自冲铆接机在车身轻量化制造中有很好的应用前景。
Basing on the experiments and analyses, it puts forward a simple and feasible method of checking the fatigue strength of revolving axle in a stable state.
在实验和分析的基础上，对工作在稳定状态下的转轴，提出一种简化可行的疲劳强度校核方法。
Latest studies on fatigue behaviors of concrete members strengthened with FRP sheets are introduced in this paper, including experiments, simulation analysis and design Suggestions, etc.
本文主要介绍国内外关于FRP片材加固混凝土构件疲劳性能的试验研究、仿真分析与设计建议等方面的最新研究进展。
A new comparative test approach is provided for the thermal fatigue life experiments of turbine blade under thermal shock. The tested blades and reference blades were mounted in a common vane cascade.
针对涡轮叶片的热冲击疲劳寿命实验，提出了一种新的对比实验方案和措施：将实验叶片和参照叶片组合在同一组试验叶栅上，并且在试验过程中定期对调两种叶片的安装位置。
Based on the experiments of shot peening to some specimens, the paper makes an approach to strengthening mechanism and fatigue resistance technology for nodular cast iron.
对试样进行了喷丸处理，进而探讨了球铁材料的强化机制和抗疲劳技术。
Based on experiments, the paper also brings forward the measures and methods of how to improve the anti-fatigue life of threaded connecting joints.
本文以科学实验为依据，提出了如何提高螺纹连接件抗拉疲劳寿命的措施和方法。
Objective: To observe the anti - fatigue and anti - hypoxia effects of the functional liquid of Chinese traditional medicine, some experiments were done in mice.
目的：观察复方中药功能液对受试小鼠的抗疲劳和耐缺氧作用。
Objective: To observe the anti-fatigue effect of the functional liquid of Chinese traditional medicine, we did some experiments in mice.
目的：观察复方中药功能液对小鼠的抗疲劳作用的影响。
The experiments showed that the intermediate annealing can prolong the fatigue life.
结果表明中间退火可以延长疲劳寿命。
The experiments showed that the intermediate annealing can prolong the fatigue life.
结果表明中间退火可以延长疲劳寿命。
应用推荐