Photopolymer is a new material for holographic storage; it has a number of compelling properties such as high diffraction efficiency, relatively simple fabrication process, and long persistence.
光致聚合物是一种用于激光全息存储的新型材料,它具有衍射效率高、制作工艺相对简单、易于保存等优点。
The optimization of the MEMS fabrication process is analyzed.
分析了MEMS制作工艺的改进。
The kernel problem in virtual MEMS fabrication process is process model.
MEMS加工工艺的核心是工艺模型。
The fabrication process and application of silicon carbide mirror are presented.
综述了碳化硅反射镜材料常用制备方法的特点。
The study on fabrication process of a high k capacitive MEMS switch is presented.
介绍了一种电容式MEMS开关的制作工艺。
The sensing principle, fabrication process and some experimental results are reported.
文中详述了该传感器的工作原理、制造工艺及测试结果。
The process variation accounts for deviations in the semiconductor fabrication process.
工艺参数的变异导致半导体制造过程的偏差。
The DC measuring result of our device demonstrates that our fabrication process is right.
器件的直流测量结果证实我们的制造工艺是可行的。
In the fabrication process, it is a crucial step to purify and modify the carbon nanotubes.
在纳电子器件的制备过程中,碳纳米管的提纯和化学修饰是一个很重要的处理步骤。
During its fabrication process, bonding is the key procedure to almost all microfluidic chips.
在微流控芯片的制造过程中,键合是关键步骤之一。
Machined surface topographies are carriers for fabrication process and functional information.
机械加工表面形貌是加工工艺信息和零件功能信息的载体。
A fabrication process has been developed to form a polymer micro tip arrays using micromachining.
采用微加工工艺制备出一种聚合物微锥阵列。
The filter features high cut-off frequency and the fabrication process is compatible with MOS process.
该滤波器具有高截止频率、与MOS工艺兼容、便于单片集成等优点。
Chapter three: Presents the fabrication process of micro-switch with cantilever beam and designed the masks.
第三章给出了等截面悬臂梁微开关的微机械加工工艺,设计了掩膜版及具体的工艺参数。
A novel electrostatic microrelay with parallel-comb drive structure and its fabrication process were presented.
介绍了一种新型的、利用并联梳齿结构驱动的静电型微继电器及其制造工艺。
The utility model has the advantages of simple structure, simple fabrication process and strong practicability.
它具有结构和制造工艺十分简单,实用性强的优点。
Single step mask fabrication process is developed for LIGA technology, which made mask-making process simplified.
在LIGA技术研究中提出了一次掩膜成型法,简化了工艺过程;
Moreover, PLED has simple fabrication process and low cost, which shows a promising market with strong competition.
同时,PLED制作工艺简单、成本低,使其显示出了强大的竞争力和巨大的市场前景。
The gradient distribution of coatings' composition can effectively reduce thermal stress during fabrication process.
涂层成分的梯度化,可有效地缓和制备过程中的热应力。
The stochastic nature of the IC fabrication process and the resulting difficulties in the process control are described.
本文说明了IC生产工艺的随机性及其给工艺控制和决策带来的困难。
CCD and CMOS image sensors each have strengths and weaknesses coming from their architecture or their fabrication process.
CCD与CMOS图像传感器由于结构和制造过程的不同而存在各自的优势与劣势。
The structural design and fabrication process of the thruster, as well as the approach of propellant injection are presented.
给出了推进器的结构设计、工艺流程,以及推进剂加注方法。
A big challenge to the development of this type of ASICs is the fabrication process for high-voltage, high-frequency pair JFETs.
国内在这些专用集成电路的研制工作中所面临的主要困难,是高耐压高频结型场效应对管的工艺制作。
The low selectivity of masking materials is one of the restrictions on fabrication process of high aspect ratio of micro-structures.
掩蔽层材料选择比低是硅高深宽比微结构实现的限制之一。
The fabrication process of a compact planar waveguide etched-grating(EDG) demultiplexer based on silicon-on-insulator(SOI) is studied.
研究了基于绝缘材料上的硅(SOI)材料的平面波导刻蚀光栅分波器的主要制作工艺。
The goals of testing are to discard defective devices and learn information to improve the fabrication process yield and reduce costs.
测试的目的是检测出有缺陷的器件并且获得改善制造工艺成品率的方法,从而降低器件的制造成本。
Described are principles, applications and fabrication process of conventional masks and phase-shifting masks with sub-resolution pattems.
介绍亚分辨图形掩模的原理、应用及具有亚分辨图形的相移掩模和传统掩模的制作方法和工艺。
The fabrication process is carefully controlled so that the grating groove and multilayer-coating parameters well meet the design targets.
由于对离子束刻蚀工艺和镀膜工艺的精细控制,光栅的槽形参数及多层膜参数良好地满足了设计要求。
Geometry control during fabrication is studied and detailed geometry control method during fabrication process of beam segments is presented.
研究了梁段制造过程中的线形控制,给出了具体的梁段制造过程线形控制方法。
The article introduces the fabrication process of 350mw steam turbine outer cylinder, and describes the solution to every difficulty in detail.
介绍了350MW汽轮机低压外缸的制造过程,并对各个制造难点的解决作了详细的说明。
应用推荐