Extruders are always seeking ways to improve production capacity.
挤压机一直在寻求方法来提高产能。
A driven method of extruders by variable speed switched reluctance motor drive is put forward.
介绍了用开关磁阻调速电机驱动挤出机的方法。
It was proved in practice that the renovated extruders had higher performances in efficiency and...
实践证明这种方法提高了挤出机的性能和效率。
Coextrusion is a process that moulds the multilayer product in one die by two or more than two extruders.
共挤出复合成型是使用两台以上的挤出机在一个机头中成型多层结构的加工过程。
Taylor Food produces varied high quality ice cream, ice cream extruders and ice cream storage equipments.
杭州泰龙食品有限公司主要从事冰淇淋，冰淇淋挤压设备和储存设备的生产，研发和销售。
The classification of twin screw extruders and their performance and application were introduced in this paper.
本文介绍了双螺杆挤出机的分类、性能及应用。
Importance of centre distance (a) between twin screws on the design of extruders, driving systems and their ser...
阐述了双螺杆中心距a对主机、传动系统设计及系列化的重要性。
New extruders can achieve higher throughputs, narrow tolerances and better melt homogeneity and therefore improved product quality.
新式挤出机能实现更高的加工能力、范围窄的公差和更好的熔体均匀度，所以提高了产品质量。
Kneading blocks are a kind of screw elements wildly used in co-rotating twin screw extruders, with complicated shape and high precision.
捏合块是同向双螺杆挤出机中广泛使用着一种螺杆元件，其外形较复杂，精度要求较高。
This thesis concentrates on simulation of Non-Newtonian isothermal flow in kneading block in closely intermeshing co-rotating twin screw extruders.
本文主要就全啮合同向双螺杆挤出机捏合块流道中熔体全充满区的流动进行了全三维非牛顿等温模拟。
The OM extruders, equipping all our extrusion lines, meet the highest technological standards, by guaranteeing the utmost output and quality levels.
OM挤出机，装配于我们制造的所有生产线，可以达到最高的技术标准，进而保障最大的产量和最高的质量水平。
The pressure, velocity and Viscosity distribution is discussed, and the extrusion characteristics of twin screw and tri-screw extruders are compared.
通过速度和压力分布，计算了三螺杆挤出机的螺杆挤出特性参数，并和双螺杆挤出机进行对比分析。
Vibration force field was introduced into processing of plastics in tri-screw dynamic mixing extruders, so as to intensifying mixability and dispersion.
三螺杆动态混炼挤出机将振动力场引入到物料的塑化混炼挤出过程，达到强化混炼和分散的目的。
These years, novel screw is used increasingly in the field of plastic, and most of extruders are equipped with all kinds of screws in some developed countries.
近年来，新型螺杆在塑料行业的应用越来越广泛，国外的大部分挤出机都已经装备了各种新型螺杆。
Gear pump is usually used in conjunction with single or twin screw extruders. In this paper, the gear pump and its applications in extrusion system are introduced.
齿轮泵通常与单螺杆式双螺杆挤出机一起使用。本文主要介绍齿轮泵系统和在挤出加工中的应用。
It is verified in theory that the multiple-screw extruders have good material transportation and mixed ability. Multiple-screw extruder is fitter for polymer processing.
从理论上验证了多螺杆反应器在物料输运能力以及物料混合能力等方面均具有较佳的能力，多螺杆反应器更适合聚合物的加工。
It puts forward a scientific basis and analytical means to optimize the design of single screw extruders and to control processing parameters for attaining ideal products.
这为优化单螺杆挤出机设计，并控制加工过程以获得理想的产品，提供了科学依据和设计分析手段。
Come with adjustment seal devices to satisfy the demands for extrusion production of any types of polymers. May work in conjunction with extruders of various specifications.
采用调节密封装置，满足任意聚合物高挤出量生产，可与不同标准挤出机配合使用。
The new progress about twin—screw extruders and control technology in reaction extrusion line are described. Some applications of viscometer in this processing technology are introduced too.
介绍双螺杆挤出机的最新进展以及反应性挤出生产线控制技术开发动向；详述粘度计在反应性挤出工艺中的应用。
Norda mainly supplies polymer - purposed single screw / twin screw extruders, compounding and granulating systems, plastic sheets / plates / films extrusion lines and polymer recycling systems.
诺达公司的产品主要包括高分子材料加工用多种类型单/双螺杆挤出机系列、配混造粒成套设备、塑料片材/板材/薄膜设备、高分子材料回收设备等。
At present, it's lag in technology for kneading block manufacturing, or say, the outline precision of kneading block can not be ensured, which influences the whole property of extruders greatly.
目前我国的捏合块制造工艺还相对落后，捏合块轮廓曲线加工精度无法保证，大大影响了挤出机的整机性能。
The development of the manufacturing process of waste plastic-wood fiber composite are introduced. The choice of extruders, designing of dies and adjustment of technical parameters were discussed.
主要介绍了废旧塑木复合材料成型加工的研究进展，并就挤出机选型、机头设计、工艺参数进行了研究与探讨。
With visualized twin screw extrusion experiment, solid conveying phenomena in twin screw extruders are observed, recorded, described and analyzed. The solid conveying can be devided into three stages.
利用可视化双螺杆挤出机进行挤出观察实验，记录、描述并分析了同向双螺杆挤出中的固体输送现象，根据现象可把固体输送过程分为三个阶段。
With visualized twin screw extrusion experiment, solid conveying phenomena in twin screw extruders are observed, recorded, described and analyzed. The solid conveying can be devided into three stages.
利用可视化双螺杆挤出机进行挤出观察实验，记录、描述并分析了同向双螺杆挤出中的固体输送现象，根据现象可把固体输送过程分为三个阶段。
应用推荐