The cement samples damage and fracture by exploding load was studied by experiment and numerical simulation method.
从实验和数值模拟两方面对爆炸载荷对水泥试样的损伤破坏进行了研究。
Based on model of experiment and numerical simulation, the factors influencing the length of air cavity are analyzed in this paper.
采用模型试验和三维数值模拟，对侧墙掺气坎空腔长度的影响因素进行了探讨。
The internal boundary of ductile metal was comprehensively studied by the combination of macro-mesoscopic experiment and numerical simulation.
通过宏细观相结和的方法，对韧性金属材料的内界面进行实验研究和数值计算。
This paper conducted indoor experiment and numerical simulation to H-shaped GFRP beam, and studied the mechanical properties and failure form.
本文对工字型GFRP梁进行室内实验和数值模拟，对GFRP梁的受力性能和破坏形态进行了研究。
Influence of the workpieces pre-hole diameters and passes on thick-wall cylinders hole flanging is investigated by experiment and numerical simulation.
采用实验研究和数值模拟的方法，分析了工件预加工孔径和孔型参数对厚壁筒体翻孔工艺的影响。
Its photoelectric negative resistance characteristics were investigated both by experiment and numerical simulation and its equivalent circuit is proposed.
本文对它的光电负阻特性进行了数值模拟和实验研究，给出了器件等效电路。
With laboratory experiment and numerical simulation, the mechanisms of combustion and heat transfer during oil production of in-situ combustion are studied.
利用室内实验和数值模拟研究火烧油层采油过程中的燃烧及传热机理。
The experiment and numerical simulation results have proved this technology can exert forming limit of sheet greatly, it can form deep drawing parts direct…
试验和模拟结果表明，应用固体颗粒介质成形工艺可以极大限度地发挥板料的成形性能，不需要任何辅助工序，可以一次成形深拉深件，且表面质量好，成品率高。
This paper studies the influence of cross wind on the performance of natural draft dry - cooling tower by means of model experiment and numerical simulation.
本文结合模型实验与数值模拟两种手段，综合研究了横向风对自然通风干式冷却塔运行性能的影响。
Mold experiment and numerical simulation methods are adopted analyze the mechanical properties evolution of rock mass under blasting shock load in this paper.
通过实验室模型试验以及对具体边坡工程的数值模拟相结合的方法分析了在爆炸冲击载荷作用下岩体力学特性的演化过程。
Through theoretical study, model experiment and numerical simulation, the characteristics of dynamic response with different defects in the anchor bars are studied.
通过理论研究、实验室模型试验和数值模拟试验等技术，研究不同损伤锚杆应力波的传播规律、特性。
The dissertation studies the characteristics of gas mixing and the gas-solid two phases flow in spouted-fluidization bed with experiment and numerical simulation methods.
本文通过采用实验和数值模拟的方法，研究了喷动流化床内气体混合特性以及床内气固两相的流动特性。
The Single Input and Single Output(SISO)modal experiment and numerical simulation was used to study the dynamic behavior of a CFST column-H steel beam frame structure model.
方法利用单输入单输出（SISO）模态试验方法和数值模拟方法，对一榀钢管混凝土柱-H钢梁框架结构模型的动力特性进行测试分析。
The flow fields inside fan with different blade incidences are achieved by experiment and numerical simulation. Meanwhile, some advices are given to improve the fan's performance.
通过流场测量和数值方法模拟了不同动叶安装角下风机的内部流场，为风机的进一步改良提出了建议。
By long core displacement experiment and numerical simulation, has made comparative analysis of development effect for injection water, WAG, GAW, and injection gas in PuBei oil field.
通过长岩心驱替实验和数值模拟研究，对葡北油田在注水、水气交替、气水交替、注气驱替方式下的开发效果进行了对比研究。
In this paper, theoretical research, physical experiment and numerical simulation are combined to systematically study the Aluminum powder forming discipline and compacting mechanism.
本论文运用理论研究、物理实验和有限元数值模拟相结合，系统地研究了粉末成形规律及其致密化机制。
To discover the mechanism of progressive failure of rock slope, physical simulation experiment and numerical simulation analysis by means of FLAC software have been done simultaneously.
为了揭示岩体边坡渐进破坏的机理，在对边坡渐进破坏进行物理模拟的同时，应用FLAC软件对边坡渐进破坏过程进行了数值模拟。
And combined with numerical simulation analysis, the result of the experiment on the model is validated.
最后结合数值模拟分析的方法，对模型试验的结果进行验证。
In this paper, the flow mechanism and the applications of thrust vectoring using synthetic jet are studied in theory, numerical simulation and experiment.
本文采用理论分析、数值模拟与实验相结合的方法对合成射流流动机理及推力向量控制中的应用进行研究。
Influences of input optical pulses including the control pulse and probe pulse on the switching window of ultrafast nonlinear interferometer (UNI) are studied by numerical simulation and experiment.
就超快非线性干涉仪(UNI)的输入光特性对其开关窗口的影响进行了数值模拟和实验研究，输入光包括控制光脉冲和探测光脉冲。
Through the comparison of numerical simulation value and experiment results, the range of reduction ratio was obtained while the tube forming ideality.
通过数值模拟与实验结果的比较，得出了获得较理想的成形薄壁筒形件时减薄率的选取范围。
So this paper is related to the study of basic forming principles of cold rolling for double groove ball bearing outer rings from theory, numerical simulation and experiment.
本文以双沟轴承外圈为研究对象，从理论、数值模拟和实验角度对双沟轴承套圈冷辗扩成型基本规律进行了深入研究。
Hypersonic viscous interaction effects on measurement of free stream pressure in test section are studied through theoretical analysis, experiment measurement and numerical simulation.
通过理论分析、实验测量和数值模拟，研究高超声速粘性相互作用对实验段自由流静压测量的影响。
By theoretical analysis, numerical simulation and experiment research, the Interleaver based on optical all-pass filter technique is investigated.
对基于光全通滤波技术的奇偶交错滤波器进行了理论分析、数值模拟和实验研究工作。
The performance of dual-bed three-way catalytic converters with conventional structure and a particular structure was compared by numerical simulation and experiment.
采用数值模拟和实验相结合的方法比较了常规结构和一种特殊结构双载体三效催化转化器的性能。
The methods of numerical simulation and experiment have been used to study flow laws and distributing uniformity of baking equipment in the paper.
本论文采用数值模拟和实验相结合的方法，研究了焙烧装置分配室的烟气流动规律和流量分配均匀性。
By making use of numerical simulation and experiment methods, we studied the shielded structure of steel fiber reinforced concrete (SFRC) with tightly arrayed corundum spheres.
本文采用数值模拟与实验相结合的方法，对加入密排刚玉球层的钢纤维增强混凝土遮弹结构进行了较系统的分析研究。
By making use of numerical simulation and experiment methods, we studied the shielded structure of steel fiber reinforced concrete (SFRC) with tightly arrayed corundum spheres.
本文采用数值模拟与实验相结合的方法，对加入密排刚玉球层的钢纤维增强混凝土遮弹结构进行了较系统的分析研究。
应用推荐