The experimental result shows that it adopts industrial Ethernet bus with the advantages of high rate of communication, good compatibility and low cost.
系统实验表明，采用工业以太网总线方式，具有通信速率高、开放性好、成本低廉的优点。
For instance, the Ethernet controller with specification 02:01.0 tells you that the card is in bus #02, slot #01, with function #0.
例如，规范说明为 02:01.0 的以太网控制器，告诉您这个插件是在 #02总线的 #01插槽中，其功能是 #0 。
Because there is another Ethernet controller with the same bus and slot number (and a different function), this is a two-port controller.
因为还有另一个有着相同的总线和插槽编号(而功能不同)的以太网控制器，所以这是一个两口的控制器。
It boots from the microSD card with no flash memory and hosts new interfaces, including a DB-9 serial connector, integrated 4-port Universal serial Bus (USB) hub, and integrated Ethernet port.
它没有闪存从microsd卡引导，但是有很多新接口，包括一个DB - 9系列的连接器、集成4个端口的UniversalSerialBus (usb)总线、以及集成的Ethernet端口。
We have seen Ethernet, bus network, wireless network, but few Internet cafes take over 232 groups, sent a reference program.
说明：大家见过以太网、总线网、无线网，但是很少接过232组网吧，送上一个参考方案。
With the application of Ethernet in the industrial area of control, configuration software of monitor based on Ethernet and field bus is becoming more and more important.
随着以太网技术在工业控制领域中的应用，基于工业以太网和现场总线的监控组态软件越来越显得重要。
Industry Ethernet and process field bus is the mainstream technology in 21 century. It is widely used nowadays.
工业以太网和过程现场总线控制技术是21世纪的主流技术，应用也将会越来越广泛。
The author introduces characteristics of industrial Ethernet and makes detail comparison of main specifications between industrial Ethernet and traditional field bus.
介绍了工业以太网的特点，并详细比较了工业以太网和传统现场总线的各项主要指标。
A multiple protocol converter developed by using protocol conversion principle is introduced finally, it supports industrial Ethernet and multiple field bus technology conversion.
最后介绍了采用协议转换原理研究开发的一种支持工业以太网与多种现场总线技术转换的多协议转换器。
RETHER is a timed-token-passing bus protocol based on Ethernet. It provides the real-time transfer performance.
RETHER是一种基于以太网的定时令牌总线协议，能够对数据传输提供实时性能。
With the communication interfaces of RS-232, RS-485, CAN field bus and Ethernet, it is available for different connection modes of power system.
装置配有RS- 232, RS - 485,CAN现场总线及以太网通信接口，可适用于电力系统的多种接线方式。
To avoid interfering by work, data were sampled through a multi-layers network which synthesize the field-bus and Ethernet and center on programmable logic controller.
为了排除人为干扰、提高可靠性，采集数据以可编程逻辑控制器为核心，通过现场总线和以太网的多层网络传送至数据库中。
Another type is to configure the hardware gateway of this field bus, let Ethernet of the gateway access to this server.
另外一种是配置该现场总线的硬件网关，让网关的以太网接入到该服务器中。
The trend of new substation automation is that Ethernet will be used for process bus and station bus in substation.
以太网应用于变电站自动化系统的过程总线和厂站总线已经成为新一代变电站自动化系统的发展趋势。
EthernetBuiltIn scans the PCI bus for Ethernet controllers and enables the "built-in" property for them.
内建网卡扫描pci总线上的网卡控制器并使得他们工作。
According to the character of integration system of management and control, we present the scheme of process controlling of CAN field -bus and Ethernet, and its realization adopted SHCAN2000.
根据管控一体化系统特点，提出了CAN现场总线和以太网综合应用的控制方案，以及采用SHCAN 2000型现场总线控制系统的设计与实现。
With the application of computer technology in the process industrial area of control, system of monitor based on Ethernet, Internet and field bus is becoming more and more important.
随着计算机技术在过程工业控制领域中的应用，基于以太网、互联网和现场总线的监测系统越来越显得重要。
For the software design, it's composed of three modules: CAN bus equipment interface communication module, purify gateway protocol transform module and Ethernet application module.
软件设计分为三个模块：CAN总线设备接口通信模块、透明网关协议转换模块和以太网层应用模块。
According to the principle of power over Ethernet, the method of RS-485 bus power is applied to implement the transmission of 48 VDC and data signals via the same twisted-pair electric cable.
基于以太网供电原理，采用RS- 485总线供电方式，实现48V直流能量与数据沿同一线对的叠加传输。
This thesis offers an solution about connectivity between the CAN bus and Ethernet on the basis of studies about them and the analysis the specific features of industrial Ethernet Gateway.
本文在研究了工业以太网和CAN总线的基础上，分析了工业以太网关的具体功能，提出了工业以太网和CAN总线的协议互转解决方案。
First, an interface convert card is designed, which can convert can field bus and RS-485 bus to Ethernet. This card will build up the hardware platform of the seamless communication system.
本文首先设计了用于CAN总线和RS- 485总线向以太网转换的接口转换卡，构建了无缝通信系统的硬件平台。
This paper introduces a kind of designing and realizing a gateway for transfer protocol between CAN bus and Ethernet.
介绍了一种以太网与CAN现场总线之间协议转换网关的设计与实现。
In order to realize Ethernet and CAN bus's data conversion, Constructed a interconnect system based on embedded technology between CAN bus and Ethernet.
为了实现以太网与CAN总线的数据交换，构建了一个基于嵌入式的CAN总线与以太网互连系统。
The connection between can bus and Ethernet can be realized with MC68HC05X16 microcomputer integrated can communication controller and RTL8019AS Ethernet controller.
采用集成CAN通信控制器的MC68 HC 05x16单片机和RTL8019AS以太网控制器可实现CAN与以太网的连接。
This paper discussed detailedly about the CAN Bus-Ethernet Controller of Data Exchange design and configure software design.
本文详细讨论了CAN—以太网数据转换控制器及上位机配置软件的设计。
The thesis successfully applies the CAN-BUS connecting Ethernet technology to industry boiler feed-water control system.
本文将CAN总线及其以太网接入技术成功地应用于工业锅炉给水控制系统。
CAN-BUS interface adopts protocol control chip SJA1000 plus receiving and sending chip 82c250. Ethernet interface adopts Ethernet controller RTL8019AS as physical transmission media.
CAN总线接口采用协议控制芯片SJA1000，配以收发器82c250。以太网接口采用以太网控制器rtl 8019as作为物理层传输媒介。
Secondly several kinds of more existing on-the-spot buses, consider the bus bar protects the demand of the transfer rate, select Ethernet for use as the medium.
其次比较现有的几种现场总线，考虑到母线保护传输速率的要求，选用以太网为介质。
This paper describes the implementation method and technology of Ethernet interface card based on USB BUS. A 10base-t Ethernet adapter based on USB1.1 protocol has been designed.
论述了基于USB总线的以太网接口卡的实现方法和技术，设计开发了符合USB1.1协议的10BASE - T以太网接口卡。
Therefore, the study about connectivity between the CAN bus and Ethernet has an important practical signifiCANce.
因此，研究CAN总线与以太网之间的互联具有重要的现实意义。
应用推荐