Upon return to the docking station, the Ethernet connection would be detected and communication resumed over this interface.
在返回固定位置时，以太网连接会被重新检测到，通信就可以在这个接口上恢复。
It monitors the health of a particular service (or services) through either a serial line or Ethernet interface or both.
它通过串行线、以太网接口或者同时使用二者来监测特定服务(或多个服务)的健康状况。
When we shut the interface down, we turn off the Ethernet ports, remove them from the bridge, and remove the bridge interface.
当我们关闭接口时，我们关闭了以太网端口，将它们从网桥上除去，然后除去网桥接口。
We had to create the bridge interface before adding the Ethernet ports to it, so now we remove them before deleting the bridge interface.
我们必须先创建网桥接口，然后才能向它添加以太网端口，因此，现在我们先除去以太网端口，然后再删除网桥接口。
For example, consider a laptop that includes a wireless 802.11 interface and an Ethernet interface.
例如，让我们来考虑一台包含一个无线802.11接口和一个以太网接口的笔记本的例子。
Gigabit Ethernet is now the standard network interface, although 10gbit network CARDS and infrastructure is becoming more accessible.
GigabitEthernet现在是标准网络接口，但10gbit网卡和基础架构正在逐渐流行起来。
You will have to enable a second Ethernet interface and configure PF to your needs.
您需要启用第二个Ethernet接口，并根据需要配置PF。
The Virtual I/O Client (VIOC), bxaix85, was configured with a virtual ethernet interface configured with the appropriate VLAN ID to communicate with the outside world using the SEA in the VIOS.
VirtualI/O客户机（VIOC）bxaix85配置了一个具有适当VLANID 的虚拟以太网接口，从而通过 VIOS 中的SEA与外界通信。
Ethernet interface ent0 on the blade maps to the first switch on the blade chassis; each consecutive Ethernet interface maps to the next available switch.
刀片服务器上的以太网接口ent0映射到刀片服务器机架上的第一个交换机；每个以太网接口依次映射到下一个可用的交换机。
Configure the NFA to the network interface card (configure an alias using Ethernet card 0).
配置NFA到网络接口卡(使用以太网卡0配置一个别名)。
Examples of devices at this layer include the SLIP driver over a serial interface or an Ethernet driver over an Ethernet device.
例如，包串口使用的SLIP驱动程序以及以太网设备使用的以太网驱动程序都是这一层的设备。
The current routers or the exchangers offer gigabit Ethernet interface including multiple ports.
当前的路由器或交换机产品都提供多端口千兆以太网接口。
This paper introduces a method of hardware constitution and software design of embedded system containing Ethernet interface and adopting DSP as its core processor.
介绍了以DSP为核心具有以太网接口的嵌入式系统的硬件电路组成和软件设计方法。
The medical image processing system, which centers on the least system of the PXA255 processor, is expanded by adding program memory, data memory, UART, USB and Ethernet interface.
医学影像处理系统以PXA255处理器的最小系统为核心，扩展了程序存储器、数据存储器、UART串口、USB和以太网接口。
Then introduces the system design principle and the Ethernet interface module's hardware realization method in details.
然后详细介绍了系统设计原则以及以太网接口模块的硬件实现方法。
So, it is of important scientific significance and practical value that an embedded inverter with Ethernet interface is developed.
因此，研制一个带以太网接口的嵌入式变频器具有重要的科学意义和应用价值。
This paper Introduces the application of embedded Ethernet interface technology in the Families Network Control Systems.
介绍了嵌入式以太网接口技术在家庭网络控制系统中的应用。
The embedded network device resarched is a distributed I/O device which has an ethernet interface, it is applied mainly in industrial automatic control field to monitor heavy-duty equipments remotely.
涉及的嵌入式网络化装置是一个具有以太网接口的分布式输入输出装置，主要应用于工业自动化控制领域，对大型设备实施远程监控。
The microprocessor LPC2210 with the ARM kernel is introduced, and the Ethernet-controlled chip RTL8019AS, and the Ethernet interface of the embedded system are designed.
介绍基于ARM内核的微处理器LPC 2210、以太网rtl 8019as芯片的性能，设计了一种基于二者的嵌入式系统以太网接口方案。
Then, this article discusses how to use single chip and RTL8019AS to realize the Ethernet interface.
然后论述了用单片机和RTL8019AS实现以太网接口的方法。
Based on the introduction of industrial Ethernet technique, this paper describes a method of expanding an Ethernet interface using RTL8019AS Ethernet controller in the 80c196 single-chip system.
该文在对工业以太网技术阐述的基础上，具体介绍了在80c196单片机系统中，利用RTL8019AS以太网控制芯片，实现工业以太网接口的硬件电路设计及软件设计。
The paper introduce a design of embedded Ethernet interface which base on ARM microprocessor LPC2106. The paper describe the hardware and software design of this system.
介绍了一种以ARM微处理器LPC2106为核心的嵌入式以太网接口设计方法。
The internal structure and principle of Ethernet controller are analyzed, and the Ethernet interface circuit is designed using this controller.
分析了以太网控制器的内部结构和工作原理，并用其设计了以太网接口电路。
The second part explains the principle and realization of weighing device's Ethernet interface.
第二部分讲述电子衡器以太网接口的原理及其实现。
This paper introduces the DM642 traffic information collection system from aspects of system core, memorizer, video interface, Ethernet interface, and audio interface, etc.
从系统核心、存储器、视频接口、以太网接口、音频接口等方面介绍了DM642交通信息采集系统。
A gigabit Ethernet interface makes sure that data from external sources is also transferred at a high rate.
一个吉比特以太网界面可保证数据从外部进入时仍处于高速状态。
The main work of the author is the Ethernet interface hardware, software modules and related design and implementation of the T-MPLS experimental prototype.
作者主要负责T-MPLS实验节点设备中以太网接口相关的软硬件模块的设计和实现。
The small footprint module adds an OPC-UA Server to any product via an integrated RJ-45 Ethernet interface and ARM microcontroller.
通过将RJ - 45以太网接口和ARM微处理器相结合，小尺寸模块将OPC -UA服务器增加到任何一个产品中。
CAN-BUS interface adopts protocol control chip SJA1000 plus receiving and sending chip 82c250. Ethernet interface adopts Ethernet controller RTL8019AS as physical transmission media.
CAN总线接口采用协议控制芯片SJA1000，配以收发器82c250。以太网接口采用以太网控制器rtl 8019as作为物理层传输媒介。
CAN-BUS interface adopts protocol control chip SJA1000 plus receiving and sending chip 82c250. Ethernet interface adopts Ethernet controller RTL8019AS as physical transmission media.
CAN总线接口采用协议控制芯片SJA1000，配以收发器82c250。以太网接口采用以太网控制器rtl 8019as作为物理层传输媒介。
应用推荐