The error and solution bringing from finite element disperse are expatiated.
阐述了有限元离散带来的误差和解决办法。
Developing the solution with this in mind involved some trial and error for us.
用这个去开发解决方案会让我们遇到一些麻烦和错误。
Have you ever been frustrated with an error message and unable to quickly find the right solution?
您是否曾经因为遇到了错误消息而无法快速找到正确的解决方案而感到沮丧？
The ideal solution, then, is to open the XM console and route error messages to it.
因此，理想的解决方案是打开XM控制台，然后将错误消息路由到该控制台。
If a solution lists all policy-revision pairs that the work item requires, the solution becomes cumbersome and prone to error and confusion.
如果解决方案列出工作条目需要的所有策略修正对，那么该解决方案就会变得臃肿且易于出错和变得混淆。
That is, the error BTLERR001: Business Tier Level Error matches the symptom EIS communication layer services not responding, and the solution Confirm EIS Service Layer is functional.
错误BTLERR001:BusinessTierLevelError匹配于症状EIScommunicationlayerservicesnot responding ，以及解决方案Confirm EISServiceLayer is functional 。
This update, part of Service Pack 1, is only a partial solution; it offers IntelliSense and error-checking support but with only partial preview support.
这个更新是ServicePack1的一部分，并且只是一个不完整的解决方案；它提供了智能感知和错误检测支持，但只提供了部分的预览支持。
In this paper the causes of errors, the error bounds and the action regions of errors in the moment method are analysized in detail. Some improvements on the accuracy of moment Solution are proposed.
本文对矩量法的误差来源、误差界以及误差的主要作用范围进行了较全面的分析，并据此提出了若干提高准确度的改进措施。
The existence and uniqueness theorem of its solution is proved by the perturbation method and the estimation of error for its approximate solution is given.
然后利用摄动方法证明了这个问题解的存在唯一性，同时给出了解的渐近展开和误差估计。
The reasons for error cut-in grinding of cage spherical outside surface of ball basket constant velocity joint is analyzed, and the solution for the problem is put forward.
分析了球笼式等速万向节保持架外球面切入磨削误差产生的原因，并提出解决和调整方法，从而进一步推导出调整计算式。
The planar diode is calculated by means of MCM and compared with the analytical solution. The relative error is 0.8%.
用蒙特卡洛法计算了平面二极管并与解析解进行比较，相对误差为0.8％；
In this paper we discuss conjugate direction method for LS estimator and analyse error of iterative solution.
本文讨论了求ls估计的共轭方向法，对迭代解的误差进行了分析。
The least square solution and minimum mean square error(MMSE) solution for roundness error and spindle error was derived by measurement matrix in frequency-domain.
这种方法利用频域测量矩阵直接给出了圆度形状误差和回转误差的最小二乘解或最小均方误差解。
The checkout error of distortion and flexure caused by tapers of crank bore and piston pin eye is analysed. The solution for this problem is put forward.
针对一般采用的几种连杆弯曲和扭曲测量方法，就连杆大小端孔锥度造成的测量误差进行了分析，并提出了解决途径。
The condition of existence of solution and its algorithm are given, the rounding error of the solution process is analyzed and the convergence of the spline is proved.
文中给出了解存在的条件和解法，对解的舍人误差进行了分析，并证明了样条函数的收敛性。
Our proof of the convergence is based on an asymptotic diffusion expansion and requires error estimates on a matched boundary layer approximation to the solution of the discrete-ordinate method.
其收敛性的证明是依据其渐近扩散展开式，在边界层上得到的误差估计逼近其离散纵标方法的解。
The article discussing the factors and solution of error in determine color value of monascus pigments, and proposed some modification to test methods in GB4926 - 85 food additive red kojic rice.
本文研究探讨了引起红曲色价测定结果误差的几个因素及解决办法，并对85年版《GB4926- 85食品添加剂红曲米》国家标准中的测定红曲色素色价的方法提出了几点修改建议。
Several aspects were compared, such as accuracy, phenomenon, reading error, cost and the use level of reagent. Mixed solution method was superior to KI solution method.
混合溶液法的精密度、反应现象、读数误差、试剂用量及费用等方面均优于KI溶液法。
Focusing on the high error and time consuming of the algorithms for shape from shading (SFS), a fast viscosity solution algorithm of perspective SFS (PSFS-FVS) is proposed.
针对传统的从明暗恢复形状(SFS)算法存在误差大、耗时长的问题，提出了一种SFS的快速黏性解算法(PSFS - FVS)。
Other times they begin to act without thinking; they try to find a solution by trial and error.
另外的时候，他们会不想而采取行动，他们会通过尝试和犯错误找到一个解决方法。
The second solution (which is much worse) is to catch the "item not in collection" error and then set a flag to say the item does not exist.
第二个解决方案(这是更坏)是捕捉“项目不是在收集”错误，然后设置一个标志，表示该项目不存在。
Finally through a comparison of numerical error and error images, proves that the feasibility and effectiveness of the methods for the numerical solution of the matrix difference equations.
最后通过与精确解之间的数值误差和误差图像曲线的比较，验证了所提方法在矩阵微分方程数值解应用中的可行性和有效性。
Several properties about matrix with consistent perturbation are studied and applied into linear equations. Error bounds with the solution perturbation are given.
研究了矩阵列（行）一致扰动的几个性质，并应用于线性方程组。给出了线性方程组系数矩阵一致扰动下解的相对误差界。
In the traditional solution to the SAR problems, the earth often adopts circular model and the orbit adopts elliptical model. This often brings error to the calculations.
在传统的星载sar问题的研究中，地球采用球模型，轨道采用圆轨道模型，这给星载sar问题的计算带来了一定的误差。
So it is very important to find out the inaccuracy factors, put forward the valid solution, and prevent error occurrence.
因此，找出统计不准的因素，提出有效的解决方案，防止误差出现，对医院的信息管理尤为重要。
The relation between the measuring error of standard addition method for ion selective electrode and the added amount of the standard solution was studied.
研究了离子选择性电极标准加入法的测量误差与标准溶液加入量的关系。
A technique for sieving the overdetermined system is gived by utilizing least-square method and the unique solution with minimum-error is obtained.
采用最小二乘法求解矛盾方程组，可获得误差最小的唯一解。
A closed-form solution for filter coefficients is obtained by minimizing the frequency-domain squared-error function and revealing some properties of the matrices related to the design problem.
通过最小化频域平方误差函数并揭示与设计问题有关的一些矩阵的性质，得到了滤波器系数的闭式解。
The error between the numerical solution and the two-order approximate analytic solution is smaller than the error between the numerical solution and the one-order approximate analytic solution.
二阶近似解析解和数值解的误差比一阶近似解析解和数值解的误差小。
The differential error model was used to develop the machine tool stiffness matrix. The solution gave contour plots of the position stiffness and the rotation stiffness.
根据微分误差模型，建立了机床刚度矩阵，得出了机床位置刚度和转动刚度的分布情况，着重讨论了铰链刚度对机床刚度的影响。
应用推荐