• Connectivity issues usually surface as timeouts reported in error logs or sometimes as error messages in the user interfaces.

    连通性通常表现为错误日志中报告的超时,有时也表现为用户界面中的错误消息。

    youdao

  • Experimental data showed the correctness and feasibility of the method. It is a new method for error judgement of surface flaws.

    大量现场数据的实验证明了该方法的正确性和可行性,它是一种新的表面缺陷误差判别方法。

    youdao

  • The error of surface temperature measurement of solid body and two methods for lessening it are described in this paper.

    本文讨论了固体表面温度测量的误差及两种减小误差的方法。

    youdao

  • The honing experiment shows that the teeth error and surface roughness of the machined gear have been improved greatly.

    将此高精度直齿外珩轮应用于珩齿试验中,被加工齿轮的齿形误差和表面光洁度得到了极大地提高。

    youdao

  • The error correction model of tooth surface was established by machine tool adjustment parameters and meshing principle.

    结合机床调整参数、齿轮啮合原理,建立了螺旋锥齿轮齿面误差修正模型。

    youdao

  • The vibration characteristics of external plunge grinding and the ground surface profile error are investigated through experiments analysis.

    在实验的基础上,对磨削过程振动特征以及由此产生的磨削表面形貌误差进行研究。

    youdao

  • This article is about the research on the data processing problem of measuring the radial jumped error of discontinuous gyration surface.

    论文研究的是非连续回转面径向跳动误差测量中的数据处理问题。

    youdao

  • To reduce the size error and to advance surface quality is an important aim for Rapid Prototyping.

    减小尺寸误差、提高表面质量是快速成形的重要目标。

    youdao

  • The convergence of error brought about by the curvature of earth's surface obviously has no counterpart in free space.

    地球表面曲率产生的误差是收敛的,显然,在自由空间没有类似的情况。

    youdao

  • The methods for selecting penta prism and reducing the effect of surface profile error on detection are introduced.

    介绍了选择五棱镜的方法和减小面形误差影响的方法。

    youdao

  • There are some shortages in these methods, resulting in a certain error between the fitting result and the true temperature of the object surface.

    这些处理方法自身都存在一定的缺陷,使得拟合结果与物体表面真温之间存在一定的误差。

    youdao

  • A calculation method to calculate the surface shape error of rhombic prism according to parallelism demand of emergent beam is introduced.

    介绍一种根据出射光平行度要求计算斜方棱镜面形误差的方法。

    youdao

  • A new method for calculating the space surface profile error based on genetic evolution algorithm is proposed.

    提出一种计算空间面轮廓度误差的新方法。

    youdao

  • Meanwhile, the influence of shaft surface error on the precision of rotor dynamic balancing is analyzed, and a method is proposed to overcome it.

    并分析了转轴表面误差对平衡精度的影响,得出了解决方法。

    youdao

  • The error of mathematical model is mostly resulted from near properties of the equations of trend surface.

    数学模型误差——主要由趋势面方程的逼近特性所引起。

    youdao

  • The test result also verifies the reasonable value of surface flux calculation, the conclusion can detect error in observed data.

    试验结果也证实了表面通量计算的合理性,其结论可用于对实测资料进行误差检测。

    youdao

  • The analysis is given in detail about the influence of several parameters of the surface error of optical elements including magnitude, type, scale size and distribution on the beam quality.

    定量分析了了光学面形误差各参数(幅度、类型、空间尺度和空间分布等)对光束质量的影响。

    youdao

  • The influence of prisms surface error, mainly the local irregular error, on the wavefront figure, is discussed.

    本文讨论了棱镜表面误差(主要是局部误差)对波面面形的影响。

    youdao

  • Secondly, on the assumption that the phase error on the aperture led by the random surface error obeys the Gaussian distribution with zero mean, the expression of the average power pattern is deduced.

    然后在设定由随机表面误差引入的口径相位误差服从均值为零的正态分布的条件下,推导了天线平均功率方向图的计算公式。

    youdao

  • At the same time, the models of the shape error, surface error and the chip creating error of the workpiece are proposed.

    同时提出了工件的形状误差和表面误差模型以及切屑生成模型。

    youdao

  • The above research finds out the influence of grinder error and machining setting parameter error on tooth surface error of spiral bevel gear.

    上述研究查明了磨床误差及加工调整参数误差对螺旋锥齿轮齿面误差的影响机制。

    youdao

  • Aspheric lens is being applied more and more widely, surface error is an important quality issue, and surface testing method is also very important.

    非球面镜片的应用越来越广泛,面形误差是影响非球面质量的重要指标,所采用的面形检测方法非常重要。

    youdao

  • Based on study of relationship between the average quadric error and the surface curvature, a variable resolution surface reconstruction algorithm was proposed.

    在研究平均二次误差与曲面曲率关系的基础上,提出了变分辨率的曲面重建算法。

    youdao

  • It is impossible that the surface gained by any machining is perfectly slippery. There is some microcosmic error of geometrical shape on the surface.

    任何机械加工所得的表面,实际上不可能是理想的光滑表面,总是存在一定的微观几何形状误差。

    youdao

  • In order to guarantee surface precision of using locus shaping method machining optical parts, the factors of fine grinding machine which affects surface error of part is theoretically analysed.

    为了保证用轨迹成型法加工光学零件的面形精度,对精密磨削机床影响工件面形误差的因素进行了理论分析。

    youdao

  • The surface machining precision of the accessories is denoted by relevant parameters, such as the parameters of surface roughness, the parameters of ripple, the parameters of shape error and so on.

    零件的表面加工精度由相应的参数来表征,例如表面粗糙度参数、波纹度参数和形状误差参数等。

    youdao

  • Curve fitting is a curve approaching process under definite error and the number of control points throughout surface is ascertained after curve fitting completed.

    其中曲线拟合是一个在给定误差下进行曲线逼近的过程,当曲线拟合完成之后,整个曲面的控制点的数目也就确定了。

    youdao

  • The error of surface reconstruction and the whole error are analyzed.

    对曲面重构误差和总反求误差进行了分析。

    youdao

  • The error of surface reconstruction and the whole error are analyzed.

    对曲面重构误差和总反求误差进行了分析。

    youdao

$firstVoiceSent
- 来自原声例句
小调查
请问您想要如何调整此模块?

感谢您的反馈,我们会尽快进行适当修改!
进来说说原因吧 确定
小调查
请问您想要如何调整此模块?

感谢您的反馈,我们会尽快进行适当修改!
进来说说原因吧 确定