At every level of the hierarchy, we would use functional analysis to derive requirements and engineering methods to derive measures of effectiveness.
在此层级的每一级上，我们将使用功能分析来派生需求，并用工程方法来得出有效性度量。
It covers the adaptation of the controlling and engineering methods, simulation function, decision-making support and graphic ability of production and analysis.
它涵盖了控制和工程学方法的自适应，仿真功能，决策制定支持以及产出和分析的图形显示。
However, many of the analytical problems involved are similar and most of the techniques of analysis and syntheses and methods of test are common to all branches of control engineering.
然而，所涉及到的许多分析问题是类似的，并且对于控制工程的所有分支来说，大多数的分析、综合技术与测试方法都是相同的。
Finally, the feasibility and rationality of the proposed method was shown by the practical engineering calculation and comparative analysis with other methods.
最后，通过工程实例计算，并与其它分析方法进行对比分析，表明了该方法的可行性与合理性。
The critical aspects in the corrosion protection engineering were determined through the analysis of corrosion mechanisms and comparison of corrosion protection methods.
通过对管道腐蚀机理的分析和防护方法的比较，确定了上述地区长输管道腐蚀防护设计的要点。
Based on the analysis for common methods of construction programme design with considering the new engineering condition, the author gives discussion on the skills of programme design.
在对常规施工进度计划编制方法分析的基础上，结合新工程条件的特点，就进度计划的编制技巧提出建设性探讨。
The current widely used methods of seismic response analysis for soil layers in engineering are equivalent linearization frequency domain method which is based on FFT and iterative method.
工程上广泛应用的现行土层地震反应分析方法即为借助快速傅里叶变换和迭代法的等效线性化频域方法。
This paper gives an overall analysis on the design of the grounding and thunder defence system and analyzes in engineering the methods of the system design.
该文就雷达的接地和防雷系统的设计进行了较全面的分析，并从工程实际出发分析了系统设计的方法。
The article discusses the application of "calculation Paper" engineering calculation language MATLAB in the signal analysis, and gives some analysis methods.
本文讨论了“演算纸”的工程计算语言MATLAB在信号分析中的应用，给出了分析方法。
The study of the methods of soil layers seismic response analysis is an important content in geotechnical earthquake engineering study fields now.
土层地震反应分析方法的研究是目前岩土地震工程研究领域的重要内容。
The fault tree analysis (FTA) is one of the basic methods in reliability engineering.
事故树分析法是可靠性工程的基本方法之一。
Combining the advantages of regression analysis methods and time series forecast model with equal step length, a compound forecasting model was set up , and was tested with engineering data.
结果显示，把最小二乘支持向量机回归预测与等步长时序预测相结合的预测方法应用于地下工程围岩位移监测数据的分析及预测是可行的；
Comparative analysis of case history shows that calculation methods of settlement can give reasonable settlement interval for engineering design.
工程实例的对比分析表明本文的沉降计算方法能够为工程设计提供合理的沉降量区间。
Briefly introduces the basic concept on engineering structure reliability and some practical calculation methods that are commonly used in the analysis of engineering structures.
简单介绍了工程结构可靠性的基本概念以及工程结构可靠性分析中常用的几种实用计算方法。
Some practical analysis methods for reliability vector of multilevel hierarchical and network aseismic engineering systems with intermediate state and failuredependence are established.
建立同时考虑中介状态和失效相关时多级递阶和网络抗震工程系统的可靠性向量模型及其实用分析方法。
This paper presents the methods of transfer function analysis and engineering design for variable frequency adjustable speed system of induction motor supplied by current source inverter.
本文提出了一种异步电动机电流型变频调速系统传递函数的分析及工程设计方法。
Based on the life cycle cost analysis, this paper forecasted the life cycle cost of the missile through Engineering cost method, and constructed detail forecast methods.
基于武器装备全寿命费用分解结构的基础上，运用工程费用法对导弹的全寿命费用进行了预测，构建了详细的预测方法。
This paper only studies the methods of highway engineering cost managing by way of construction management modes and construction economy analysis at each stage.
文中仅从工程管理模式和阶段经济分析的角度初步探讨工程造价控制的方法。
This paper deals with the methods of data analysis, data fit and data diagnosis by an example in the measurement engineering practices with the residual error diagnosis method as the key point.
本文以残差诊断法为中心，讨论了测试工程中数据分析、拟合与诊断的方法，并通过实例加以说明。
This paper sums up and expounds the contents, methods and procedures of effective analysis on low pressure pipe irrigation engineering.
本文阐述了管灌工程经济效益分析的内容、方法和步骤。
Analysis, calculation and design methods for brushless DC permanent magneto can be applied to engineering design.
参考同步电机电枢反应理论来分析、计算和设计无刷直流永磁电机的方法可在工程设计中应用。
This thesis summarizes the construction control methods and the construction process analysis theory of the structure applied recently in bridge engineering.
论文总结了近年来应用在桥梁工程中的施工控制方法和结构施工过程分析理论。
An analysis was performed of the method and characteristics of SPOT stereopair for DEM generation and some other methods for underlying surface information extraction currently used in engineering.
分析了利用SPOT卫星影像提取下垫面信息的现状，包括工程实践中通过SPOT立体像对恢复DEM的方法及其特点以及其他下垫面信息的提取方法及其特点；
They will be able to use these methods in subsequent courses in the design and analysis of algorithms, computability theory, software engineering, and computer systems.
尔后课程中将可利用这些方法来设计与分析演算法、可计算理论、软体工程与电脑系统。
Abstract: : Based on the author's many years of practical experience in deformation observation and theory methods of engineering measurement is discussed in this paper simple analysis.
摘要：文章根据作者多年实践经验对工程测量的理论策略及变形观测进行了简单的分析阐述。
Using several analysis methods of electromagnetic field, which makes the simulation results have good agreement with the test results, the engineering design is convenient.
灵活的应用各种电磁场分析方法，使仿真结果与测试结果一致性更好，以方便工程设计。
Analysis is made on the main three phases of the expense control for highway engineering, especially in the methods, contents, requirements and objects of each phase.
对费用控制的三个主要阶段进行分析，对每一阶段的控制方法与控制内容作出说明，对控制要求和控制目标进行探讨。
The value engineering methods are used in the remoulding of Huludao General Chemical Plant saltern crane after researches, analysis and demonstrations.
本文利用价值工程方法，通过调研、分析、论证，对葫芦岛化工总厂的盐场吊车进行了改造。
Methods The harmful levels of occupational hazards and the effect of protective measures were evaluated by field occupational health survey, engineering analysis, detection and test.
方法采用现场职业卫生调查、工程分析、检测检验等方法，评价其职业病危害程度和防护措施效果。
Methods The harmful levels of occupational hazards and the effect of protective measures were evaluated by field occupational health survey, engineering analysis, detection and test.
方法采用现场职业卫生调查、工程分析、检测检验等方法，评价其职业病危害程度和防护措施效果。
应用推荐