A fast engineering algorithm of Microwave Plasma Thruster (MPT) performance prediction was presented.
对微波等离子推进器提出一种快速性能预估的工程算法。
Example one type projectile, the deformation of projectile are numerical simulated, the results are compared well with engineering algorithm.
以某型号弹丸为例，数值模拟了高超声速条件下弹丸的气动烧蚀，得到了与工程算法较吻合的计算结果。
The research results show that the adaptive immune algorithm of the Pearl curve has superiority and effectiveness for intellectuality prediction of tunnel engineering.
研究结果显示，基于皮尔曲线的自适应免疫算法在隧道工程智能预测应用中的优越性和实用性。
This paper presents a new algorithm for very useful symmetry fuzzy optimum model in optimum design of agricultural engineering equipment.
本文针对农业工程装备模糊优化设计中常见的对称模糊优化问题，提出了一种新的求解算法。
Aiming at the optimization problem in engineering, this paper proposes a new algorithm for con-strained optimization problem by combining PSO with death penalty.
针对工程中的优化问题，将粒子群算法与死亡罚函数法相结合，提出一种求解有约束问题的优化算法。
Simulation results show that the NLF algorithm has advantages of both less computations and better tracking performance, therefore, it can be widely used in radar engineering.
仿真结果表明，NLF算法具有计算量小、跟踪性能好等特点，有较好的工程应用价值。
Also, an application of the algorithm is described for optimizing drilling parameters in drilling engineering plan.
同时，还介绍了该算法在钻井工程优化设计中优选钻进参数的应用。
Load balancing algorithm researched in the paper is to implement traffic engineering in the WDM network which USES MPLS technology.
本文研究的负载均衡算法就是业务量工程在采用了MPLS技术的WDM网络中的实现。
The result shows that this algorithm is superior in efficiency and it is import to push ahead with the research on reverse engineering.
实验结果表明，该算法具有较强的实用价值，对于进一步推动逆向工程的研究和实用化具有重要的意义。
The effect of engineering application shows that the result of control algorithm is satisfactory.
工程应用效果表明，该算法控制效果是令人满意的。
The tests proved that this algorithm is correct and it can provide a better method for shock response spectrum analysis in engineering practice.
通过试验验证了算法的正确性，为工程实践中的冲击响应谱分析提供了一种通用性相对较好的分析方法。
The practice of engineering project shows that it is the key of improving performance to choose correct control strategy and control algorithm for gas pressurization station.
工程项目的实践表明，选择正确的控制策略与控制算法是提升煤气加压站技术性能的关键。
This algorithm is based on continuous feedbacks, which is more suitable for engineering application than that based on non - continuous feedbacks.
与基于非连续状态反馈的有限时间控制算法相比，该控制算法更适合于工程应用。
Finally, the experimental results illustrate the improved KFCM algorithm can achieve good clustering performance and high efficiency for software engineering data mining.
实验结果表明，改进的KFCM算法对软件工程数据的挖掘有很好的聚类效果，且有较高的效率。
Through analyzing standard size's layout, this paper puts forward an algorithm of engineering drawing combination composing based on binary tree.
基于对标准幅面布局的分析，提出了一种基于二叉树的工程图组合排版算法。
Then, the method of building the assembly model, recognizing mating constraint type based engineering knowledge, the algorithm of inferring relative freedom of mating feature are given.
并给出装配模型的建立过程及基于工程知识的装配配合约束类型识别方法、配合特征相对自由度推理算法。
Examples show that the algorithm of the grammar analyzer can be achieved engineering requirements.
实例表明，该算法实现的语法分析器完全可以达到工程要求。
A new fuzzy PID control algorithm based on PID engineering state methods is proposed in this paper. Experimented and simulation results show that the algorithm proposed has good performances.
提出一种基于工程状态的自适应模糊pid控制算法，仿真和实验表明，具有简单、控制品质优良等特点。
In this paper, aiming at some special requirements of mesh simplification in reverse engineering, a non-uniform mesh simplification algorithm based on forcible constraint is presented.
文章针对逆向工程中的特殊简化要求，提出了一种强制约束下的非均匀网格简化算法。
Aimed at the mesh model used for engineering analysis, a coloration algorithm based on the topologic graph is presented.
针对工程分析用的网格模型，以图论中的拓扑图为基础提出了一种空间网格面的染色算法。
It is illustrated through practice that the border lines of complex curved surfaces obtained by means of this algorithm could satisfy engineering needs of model reconstruction.
实践说明，通过该算法得到的复杂曲面的边界线能够满足模型重建的工程需求。
The classical basis of the linked group are given which is used to recognize the engineering drawing papers, and the direction determination algorithm for the character string is also described.
文中关于连通群的理论分析为解决工程图中字符、数字和图形的正确分割、分类及排除噪声的干扰提供了依据，连通群的迭代算法可准确定位字符串的方向。
This thesis focuses on the research of algorithm experimental and engineering application.
本文主要在算法实验研究和工程应用两方面进行探讨。
By calculating and analysis an electromagnetic field engineering example, it is shown that the algorithm is simple and has high accuracy.
对工程电磁场实际问题的编程计算结果表明，递推算法不仅编程简单，而且计算精度也是相当高的。
The optimized mathematic model for the light fill expressway realizes the program using objects algorithm, which has proved to be effective in engineering practice.
叙述了低路堤高速公路纵断面优化设计数学模型，采用面向对象的编程思想编制的算法实现程序。
The optimized mathematic model for the light fill expressway realizes the program using objects algorithm, which has proved to be effective in engineering practice.
叙述了低路堤高速公路纵断面优化设计数学模型，采用面向对象的编程思想编制的算法实现程序。
应用推荐