Cylinder honing processing is an important part of the engine cylinder repair process.
汽缸珩磨加工是汽车发动机缸筒修复过程中的重要环节。
The piston is essentially a cylindrical plug that moves up and down in the engine cylinder.
实质上活塞是一个在气缸中上下移动的圆筒状的塞子。
The actions taking place in the engine cylinder can be divided into four events or strokes.
在发动机气缸里发生的动作，可以分为四个过程或冲程。
Bore and STROKEThe size of an engine cylinder is referred to in terms of the Bore and stroke.
发动机气缸的尺寸与内径和行程有关。
The piston is a cylindrical shaped hollow part that moves up and down inside the engine cylinder.
活塞是一个中空的圆柱体形状部件，其在发动机气缸里做上下往复运动。
Remove the engine cylinder head from the cylinder block (refer to cylinder head removal in this section).
程序用来从引擎区拆下引擎汽缸盖。
By adopting ATEQ F520 instruments and electronic governing valve the engine cylinder cc sealing detection.
通过采用ATEQF520仪器及电子调压阀对发动机缸体缸盖进行密封性检测；
These advantages have made the capacitive transducer a valuable device for measurement of engine cylinder pressures.
这些优点已使得电容式传感器成为测量发动机汽缸压力的有效的装置。
Analyses the formation reasons, common characteristics and influence factors of diesel engine cylinder bore cavitation.
分析了柴油机缸套穴蚀形成原因、特征及其影响因素。
The internal combustion engine is most common: this obtains its power by burning a liquid fuel inside the engine cylinder.
内燃机是最常见的，其动力来自气缸里液体燃料的燃烧。
In order to reduce the cost of the diesel engine cylinder head cover, the panel substituted the original aluminum cast part.
为了降低柴油机气缸盖罩的成本，使用板件替代原先的铸铝件。
Aiming at the need of checking cooling water leakage which leaks out into the gas engine cylinder, a new intelligent device is developed.
针对机务段检测柴油机气缸冷却水内漏的需要设计开发了一种新型智能检测仪器。
The numerical simulation of thermal stresses and deformation of an engine cylinder block casting was carried out by FDM/FEM integrated system.
对发动机气缸体铸件从浇注完到开箱落砂后的铸造过程应力场进行计算机数值模拟。
We have seen how the mixture of air and fuel is delivered by the fuel system to the engine cylinder, where it is compressed, ignited, and burned.
我们已经了解油气混合燃料是如何通过燃料供给系统输送到发动机气缸，并在气缸中压缩、点火、燃烧的。
An engine cylinder head gasket leaking between a cylinder and an adjacent water jacket is indicated by coolant foaming or overheating and loss of coolant.
在一个汽缸和相邻的水套之间的引擎汽缸头套环泄漏的标志是冷却液冷却液产生泡沫或者过热，并且冷却液流失。
This paper introduces previous investigations for heat transfer process within internal combustion engine cylinder and analyzes the main influence factors.
本文将目前对内燃机气缸内的传热过程已有的研究作了较系统的论述，并分析了其主要影响因素。
This paper introduces the design of exhaust system of diesel-generator for small boat, and analyses the causes of engine cylinder water trapping in details.
本文介绍了小型艇用柴油发电机组排气系统的设计方法，对小型艇上常见的柴油机气缸进水原因作了详细分析，并提出了在日常使用中的注意事。
Residual stress distribution for engine cylinder body made of casting aluminum alloy was investigated completely using X-Ray nondestructive detection method.
利用X射线无损检测方法，对铸造铝合金制造的某发动机汽缸体的残余应力分布进行了全面分析。
According to a lot of experiments, this paper advances a new viewpoint of Mass Flow to solve the passage effect of engine cylinder pressure measuring system.
本文以大量试验为依据，提出质量流动的新观点以解决内燃机气缸压力测量系统的通道效应。
The analysis and research of engine cylinder pressure and transient speed is the important method to obtain the working condition and breakdown reason of engine.
对发动机气缸压力和瞬时转速的分析和研究是获取发动机工作情况和故障原因的重要手段；
A new index is proposed to evaluate performance of the air-powered engine-the ratio of the mean effective pressure and the average pressure in the engine cylinder.
提出一个评价气动发动机性能的新指标——气动发动机平均有效压力和缸内平均压力的比值。
This paper analyses the properties of the excitation and response of an engine cylinder head system and establishes the vibration model of the cylinder head system.
对内燃机缸盖系统的振动激励及表面振动信号的特性进行分析，建立了缸盖系统的振动模型。
Ultrasonic honing and lapping complex machining technology is the hot topic of the surface texture characteristics of important parts such as engine cylinder sleeves.
超声珩磨与珩研复合加工技术是近来对发动机缸套等重要零件表面纹理特性研究的热点。
Aiming at the dynamic deformation of engine cylinder liner, a set of testing methods for measuring the deformation of wet cylinder liner in operation are put forward.
针对内燃机气缸套的动态变形问题，提出一套对湿式缸套在工作时的变形进行测试的方法。
The acquisition system integrated with sensors, data acquisition, signal and conversion is the main way to obtain engine cylinder pressure and transient speed signal.
集传感器、数据采集、信号与转换等技术于一体的采集系统，是获取发动机气缸压力和瞬时转速信号的主要方式。
It is proposed rare earth chrome-manganese-silicon alloy can replace the costly rare earth ferro-molybdenum alloy to produce diesel engine cylinder with high property.
提出用稀土铬锰硅合金代替昂贵的稀土钼铁合金生产高性能的柴油机缸体。
Makes dynamic analysis of 12v180 diesel engine cylinder liner by using FEM and conducts development study on piston impact forces resulting in cylinder liner vibration.
以12v180型柴油机的汽缸套为例，用有限元法对该缸套进行了动力分析，并对引起缸套振动的活塞冲击力的处理进行了探索性的研究。
Taking its application in cleaning of diesel engine cylinder head as an example, the cleaning results by ultrasonic-wave cleaning techniques shows good and satisfactory.
以柴油机缸盖超声波清洗机为例，阐述了超声波的清洗工艺及其应用。
Taking its application in cleaning of diesel engine cylinder head as an example, the cleaning results by ultrasonic-wave cleaning techniques shows good and satisfactory.
以柴油机缸盖超声波清洗机为例，阐述了超声波的清洗工艺及其应用。
应用推荐